Page 4 of 4 FirstFirst ... 234
Results 61 to 72 of 72

E-waste Pics - Page 4

| General Electronics Recycling
  1. #61
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Not sure what this backplane board came out of but One Stop Systems makes some pretty high end stuff






  2. The Following 2 Users say Thank You for This Post by JJinLV:



  3. #62
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This is another board with tons of gold that I can't place. None of the numbers on the board seem to turn up results but it comes from some piece of Cisco equipment. Still has some transformers need to pop off it.



    Last edited by JJinLV; 03-06-2018 at 02:51 AM.

  4. The Following 3 Users say Thank You for This Post by JJinLV:


  5. #63
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This comes out of another piece of Cisco equipment, I think a Catalyst 4500 but I'm not positive.




  6. The Following 4 Users say Thank You for This Post by JJinLV:


  7. #64
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This is a DCA 80-20048-000 IRMA. Gotta love a finger card that might grade higher than a finger card!




  8. The Following User Says Thank You to JJinLV for This Post:


  9. #65
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This is an Octel LAN Card 300-6049-001. Love how densely populated this one is!




  10. The Following 3 Users say Thank You for This Post by JJinLV:


  11. #66
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This one is a Nokia and comes out of a cell tower box




  12. The Following 2 Users say Thank You for This Post by JJinLV:


  13. #67
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Can't source this one either. With all this gold trace my guess would be telecom low for a board otherwise pretty much straight mid-grade.




  14. The Following 2 Users say Thank You for This Post by JJinLV:


  15. #68
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    This is from a transmitter module from a cell phone tower. Sooooo much gold on this one, grading a little complicated by the small plated stainless plates on the back side.




  16. The Following 2 Users say Thank You for This Post by JJinLV:


  17. #69
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    689
    Thanks
    713
    Thanked 746 Times in 356 Posts
    thats some hardcore scrapper porn for sure

  18. The Following User Says Thank You to msmoorad for This Post:


  19. #70
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    The mother of all VCRs! All the boards here that take up more space than my liftgate allows are from a Sony Betacam SP BVW-70 Videocassette Recorder. I cleaned a couple of them but these are mostly before cleaning and include 2 power boards, 2 backplane boards (one quite large!), a couple of telecom boards, some mid-grade and, with the gold connectors on each of them, cards that I think go with fingercards (otherwise a mix of mid-grade) and a couple of low-grade boards (upright at the top corner). One card is missing from the photo that I'd dropped without noticing. It was a.....chore let's call it to disassemble. Nothing was easily accessible. You have to unscrew every screw, rotate it, unscrew every screw, rotate it, unscrew every screw, rotate it, ad infinitum. Several items were attached with screws on both sides. With practice might be able to disassemble on of these in less than a half-hour. Have six to practice with so.... Each unit also has a couple pounds of aluminum, a couple pounds of motors and maybe 1.5-2lbs of wire. Posting a little more info about this in the Scrap Room.


  20. The Following User Says Thank You to JJinLV for This Post:


  21. #71
    Breakage's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Posts
    297
    Thanks
    242
    Thanked 273 Times in 149 Posts
    Quote Originally Posted by JJinLV View Post
    Can't source this one either. With all this gold trace my guess would be telecom low for a board otherwise pretty much straight mid-grade.



    This is from some kind of projector, either a TV or a self-contained unit. The "DLP" logo is for TI's proprietary projection technology. I've noticed those boards are usually pretty nice but I am usually focused on the chip, itself.

  22. The Following User Says Thank You to Breakage for This Post:


  23. #72
    JJinLV started this thread.
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Gonna reactivate this thread a little when I have time. First up is this RFL 9745 teleprotection channel. In addition to what is shown below, there is also a couple of power boards, a couple other small mid grade/peripheral cards and a modest quantity of ICW #2 35%. The case is aluminum, nearly all of which can be sold as Old Sheet or 98% clean. At current prices if you buy these for any less than say $.50/lb you'll make a tidy profit. We had to guess without the benefit of exemplar disassembly so guessed low around $.32/lb for 700~lbs. Worked out well. The one pic has two backplane boards but is only one per unit. The second is there to show the other side only.
    Attached Images Attached Images     

  24. The Following 4 Users say Thank You for This Post by JJinLV:



  25. Similar threads on the Scrap Metal Forum

    1. Replies: 39
      Last Post: 07-17-2016, 07:21 PM
    2. First batch of E-waste - with pics
      By Riverside in forum A Day in the Life of a Scrapper
      Replies: 24
      Last Post: 09-16-2014, 07:28 PM
    3. Armstr's Daily Questions (Pics Pics!)
      By armstrt8 in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 08-13-2014, 08:07 AM
    4. cpu pics
      By Jonniebrass in forum General Electronics Recycling
      Replies: 6
      Last Post: 11-16-2012, 12:02 AM
    5. Pics from first pick-up of e-waste from local school corporation
      By Hypoman in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 05-31-2012, 06:24 AM

Page 4 of 4 FirstFirst ... 234

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook