Results 1 to 10 of 10

copper yeilds more than gold???

| General Electronics Recycling
  1. #1
    Blue414 started this thread.
    Blue414's Avatar
    SMF Badges of Honor


    Member since
    Oct 2014
    Location
    Centrel Arkansas
    Posts
    61
    Thanks
    151
    Thanked 95 Times in 34 Posts

    copper yeilds more than gold???

    The title says it all. Strangly enough it is true here in my area of centrel arkansas. Up untill now I loved the heavy ends on the computer cords as I would save them and put them in my gold connector ends. Today that all stoped. I have overlooked that gold ends are now at .50 cents a pound and after calling my contact at my yard of choice he informed me that my #2 insulated price was .60 lb. So as the title states now for me in this case. Copper is outweighing the pay off for the gold. Sobb sniff sniff. This economy is getting harder and I'm just hoping I can educate myself enough to keep on going. I love this stuff (escrap) and hope that I can experiance some of the sweet payouts I read about in the older threads from a few years back.



    Ok thats my sob story. Thanks to all of you for all the information that the SMF puts out there. As bad as things are I would not be in the place I am without the shared knowledge of this forum...

  2. The Following 8 Users say Thank You for This Post by Blue414:



  3. #2
    GoldMetalRecyclers's Avatar
    SMF Badges of Honor

    Member since
    Jul 2015
    Location
    Dallas, TX
    Posts
    44
    Thanks
    11
    Thanked 13 Times in 11 Posts
    It's based on the recoveries. There is more #2 copper in the cable then there is in the connector ends. Gold still far outweighs copper.
    As of today copper 2.28 / lb, Gold 18358.40 / lb

    Proof is in the pudding. By the way may need to look for another yard as they #2 ICW price is about 0.18 low.

  4. #3
    Blue414 started this thread.
    Blue414's Avatar
    SMF Badges of Honor


    Member since
    Oct 2014
    Location
    Centrel Arkansas
    Posts
    61
    Thanks
    151
    Thanked 95 Times in 34 Posts
    Quote Originally Posted by GoldMetalRecyclers View Post
    It's based on the recoveries. There is more #2 copper in the cable then there is in the connector ends. Gold still far outweighs copper.
    As of today copper 2.28 / lb, Gold 18358.40 / lb

    Proof is in the pudding. By the way may need to look for another yard as they #2 ICW price is about 0.18 low.
    As far as the weight and the toatal value of the base metal that I cannot argue. but I cannot see cutting off cable ends now when #2 insulated copper is at .60 lbs and the gold plated connector ends are fetching .50 lbs. maybe I'll sit on the stash till it goes back up to 65 or 75 cents. dunno yet still sad cause I loved to old heavy printer cables now eh' they just get tossed into the #2.

  5. #4
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Prices in $ USD
    Gold -0.67% 1,147.40
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  6. The Following 2 Users say Thank You for This Post by Mechanic688:


  7. #5
    Blue414 started this thread.
    Blue414's Avatar
    SMF Badges of Honor


    Member since
    Oct 2014
    Location
    Centrel Arkansas
    Posts
    61
    Thanks
    151
    Thanked 95 Times in 34 Posts
    Quote Originally Posted by Mechanic688 View Post
    Prices in $ USD
    Gold -0.67% 1,147.40
    gold connectors===.50 lbs
    #2 insulated---------.62 lbs

    just never thought a "gold plated" catagory of material would be worth less than a classification like #2 insulated copper. To me untill the connectors climb in value im not saving any more of them.

  8. #6
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by Blue414 View Post
    gold connectors===.50 lbs
    #2 insulated---------.62 lbs

    just never thought a "gold plated" catagory of material would be worth less than a classification like #2 insulated copper. To me untill the connectors climb in value im not saving any more of them.
    We had a young man here from Ky that built a "pipe smasher" that he would use to break down the easier connector ends. Used a piece of 2" or 3" metal pipe, threaded a cap on one end. Used a piece of smaller pipe with same type cap that would slide down inside the larger pipe. Sprinkle in a few small gold connector ends and smash away. Take the pulverized results and I think he used water like panning for gold to separate the fluff away (broken plastic) from the actual gold pins. That would make the OMG gold jar fill up faster.

  9. The Following 4 Users say Thank You for This Post by Mechanic688:


  10. #7
    Hurrikane's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    South Park,PA
    Posts
    172
    Thanks
    95
    Thanked 155 Times in 66 Posts
    One of the yards here requires that all ends must be cut off wire or they won't take it. Needless to say, I don't take my wire there. I still cut gold ends off though and toss them in a bucket. If their value increases I'll sell them as gold ends. If not and I have to clean house and get rid of them then I'll toss them into the wire bin. It still only takes a second to clip them off. As far as the pipe smasher goes, put them in the freezer for a day or two first. When I was crazy save everything and break down as far as possible guy I Had an old really heavy duty paper shredder that I would run the ends through and it worked pretty well. Even the printer ends got chewed up. Don't do that anymore though.

  11. The Following 2 Users say Thank You for This Post by Hurrikane:


  12. #8
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    If the gold plated connectors are the type that are encased in plastic then yes, they are going to pay less for them, of course. Think about it from a business point of view.

    Copper wire still sheathed is easy enough to deal with, you just simply run it through a stripper, or you incinerate it so that you burn off the shielding. The end connectors cannot be processed in the same way. End connectors cost more to process, and produce different types of by products or gas. As well, part of the end connectors weight is that same plastic. So far as separating the gold from the copper if they are plated, that's fairly simple. They are melted into a bar and then processed via an electrolytic cell. Even still though, they must be clean. If any plastics are transferred to the copper cell, they may interfere with the refining process.

    So much more labor intensive, thus the price difference.

    Scott
    At the heart of science is an essential balance between two seemingly contradictory attitudes--an openness to new ideas, no matter how bizarre or counterintuitive they may be, and the most ruthless skeptical scrutiny of all ideas, old and new. This is how deep truths are winnowed from deep nonsense. -- Carl Sagan

  13. #9
    Blue414 started this thread.
    Blue414's Avatar
    SMF Badges of Honor


    Member since
    Oct 2014
    Location
    Centrel Arkansas
    Posts
    61
    Thanks
    151
    Thanked 95 Times in 34 Posts
    Quote Originally Posted by NobleMetalWorks View Post
    If the gold plated connectors are the type that are encased in plastic then yes, they are going to pay less for them, of course. Think about it from a business point of view.

    Copper wire still sheathed is easy enough to deal with, you just simply run it through a stripper, or you incinerate it so that you burn off the shielding. The end connectors cannot be processed in the same way. End connectors cost more to process, and produce different types of by products or gas. As well, part of the end connectors weight is that same plastic. So far as separating the gold from the copper if they are plated, that's fairly simple. They are melted into a bar and then processed via an electrolytic cell. Even still though, they must be clean. If any plastics are transferred to the copper cell, they may interfere with the refining process.

    So much more labor intensive, thus the price difference.


    Scott
    I get there is a process difference and the ease of processing the wire. As a fairly new escrapper I was really shocked in the begining to learn about the "gold connectors" I woud hit yard sales and load up on those old school printer cables where the end weighted in a about a pound for .10-.25 cents. Its not much but if im making 12-15 bucks going out and doing what I enjoy it was just as you say "icing on the cake." There are some ends that I save still as there are some I break down. But for most usd and phone ends that I run across I now no longer save them as my yard will take them as is for more than the gold ends catagory is paying me at the moment. Hope the price goes up sometime as im horde is sitting there gathering dust.

  14. #10
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,907 Times in 2,555 Posts
    I am sitting on a 5 gal bucket full of them, I don't want to get copper content for the ends which is $.04 - $.14 a pound. Cant ship them as the shipping is too high... so fill another bucket waiting for the price to rise!

  15. The Following 2 Users say Thank You for This Post by hobo finds:



  16. Similar threads on the Scrap Metal Forum

    1. Silver - Copper - Gold
      By Copper Head in forum A Day in the Life of a Scrapper
      Replies: 0
      Last Post: 01-10-2014, 06:59 PM
    2. copper/gold fingers
      By freakinredneck in forum General Electronics Recycling
      Replies: 2
      Last Post: 09-03-2012, 03:59 PM
    3. Copper Analysis 2012-06-01 with Oil & Gold
      By jbravo54 in forum General - Let's talk business
      Replies: 3
      Last Post: 06-02-2012, 02:41 PM
    4. Copper Analysis 2012-05-10 with Gold
      By jbravo54 in forum General - Let's talk business
      Replies: 13
      Last Post: 05-14-2012, 12:09 PM
    5. is this copper? gold? smth else?
      By ilyaz in forum Scrap Metal Questions and Answers
      Replies: 3
      Last Post: 10-10-2011, 10:14 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook