Page 1 of 2 12 LastLast
Results 1 to 20 of 25

Refiners: Who would y'all suggest?

| General Electronics Recycling
  1. #1
    BohemianLush started this thread.
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts

    Refiners: Who would y'all suggest?

    With a new law in effect that says that electronics can no longer go to the landfill, our e-scrap business has been booming. I have been selling a van trailer load about every couple of months. Now my goal is to send two identical loads to seperate refiners to see who cheats us the least. Who can recommend an honest refiner?



  2. #2
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Who cheats you least?

    Most refineries don't outright cheat you, it's more like they know better what's happening in the process than you do. And if they know, you don't know how your material should be processed, they are going to do what everyone does now days.

    If a woman takes her car into a mechanic and doesn't understand the work that is being done on the car, she will be overcharged in labor, and possibly the replacement of parts that didn't need to be replaced.

    People sell their gold bearing items on ebay because they know that the people buying are not educated and will most times, pay more than their recoverable values are worth.

    I can give many more examples of this same type of thing, but I think you get the point in what I am trying to express.

    So from the refiners point of view it is kind of like this. Because the market for processing precious metals is so competitive, and because so many refiners offer so close to spot prices, it creates it's own problem. So a refinery that pays 98% spot must make up their profit in some other way, usually in fees and sometimes in the recoverable values in the melt loss. What I mean is this, during the smelting/melting process there are small amounts of metals that are lost. This loss can be anywhere between 2%-8%. So if you are melting 100 ounces of gold, that means your loss could be as much as 8 ounces, of which 2%-3% is recoverable by the refiner. If for example, they smelt using different fluxes, or different temperatures, you will have different amounts of melt loss. Also, some of your values get caught up in the slag, so if you are not asking for the slag back, you could be loosing values in that.

    There are so many other ways that a refiner might capture some of your values, so if you are not educated in the process and understand how to properly represent your material, you will have a higher percentage of melt loss, than what you should. It's the mechanic charging more labor than is needed, same thing.

    I can guarantee you this, if you do not properly represent your material, you will be ripped off, there is no question about it. And dependent upon how you represent your material, you will have more or less of a loss.

    If I were you, I would hire someone that knows how to properly represent your material, and pay them a 1% of the yield as a fee, the better job they do the more they make. The return you get will more than pay for the 1% you are paying the person to represent your material. So more money in your pocket, and you get to work with someone that already understands and can help you understand exactly what is transpiring.

    You are smart to do truckloads, you get a much better deal the more material you process. 10k lbs and up is probably best, with 20k lbs being even better.

    Scott
    At the heart of science is an essential balance between two seemingly contradictory attitudes--an openness to new ideas, no matter how bizarre or counterintuitive they may be, and the most ruthless skeptical scrutiny of all ideas, old and new. This is how deep truths are winnowed from deep nonsense. -- Carl Sagan

  3. The Following 9 Users say Thank You for This Post by NobleMetalWorks:


  4. #3
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    Quote Originally Posted by BohemianLush View Post
    Who can recommend an honest refiner?
    haha, good luck! haha, sorry, it just seems difficult to find true honesty most anywhere these days ; )

  5. The Following 4 Users say Thank You for This Post by Bear:


  6. #4
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    this must be a law only in your area also depends on what u mean by refiner if you mean buyers theres plenty great ones on here do ur research but if u mean actual refiner there is here to do your research cause right now your not getting enough for real refining if your only getting a van tailer load every few months say start at 10,000lbs first and go from there cause u will get less money as you would be paying more to rifine it than what ur sending in not quite but you get the idea still do ur reasearch

  7. #5
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    good luck too with assembling two identical truck loads. I once did the same with two 50 pound boxes, and that alone was difficult enough, because when you run out of completely identical boards, they then must be sorted using a tit-for-tat technique(i.e. counting the separate slots, connectors etc etc)
    I'd really hate to try assembling two identical truckloads

  8. The Following User Says Thank You to Bear for This Post:


  9. #6
    BohemianLush started this thread.
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts
    I consider asking my fellow SMF members that are in the know part of my "research", so please don't tell me to research. I can name you a dozen refiners, but having never dealt with them before I am looking for feedback.

    Once I find the right refiner I will ship them 20k-40k in weight every month. Right now we are pacing 40k for the month of August alone.

    My idea is not to assemble two exactly identical loads, but to get as close as possible. Ex. 2 equal loads of 5k in green mobos, 5k in chinese mobos, 3k of telecom boards and 3k of boards recovered from a shredder. I figure that the yields should at the very least be comparable. This should at least give me an idea which refiner pays the most fair prices.

    Noble, please don't take offense to my statement about finding a refiner that will cheat me the least. I like your auto mechanic analogy. Basically it is the power of information. Those that have the power can choose to be fair or can choose to cheat you.

  10. #7
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    now I guess I am confused and apologize I am not sure how you have not been sending to a refiner doing this much weight you must be losing hundreds of thousands of dollars so I guess I understand why you want to get some feedback and why I said do your research is because all the refiners buyers and such who do this have thousands of feedback answers for you to go through over the years to look back on and see who is what were when why and how and if you should send to them and so forth and if your doing this much weight its in your best interest in learning or hiring someone that can set up and do your own inhouse refining which I do not recommend doing yourself with out the knowledge and experience first as for safety reasons. so instead of wasting time making up 2 loads use that time in a wiser manner and start looking though the feedback you want and looking up the knowledge you need to increase your profit 1000 fold cause if your doing over a million a year in business you need to really think of setting it up to refine

  11. #8
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    For those of you who dont know the OP is a buyer for a local yard here in denver. What the OP doesnt know is that this question has been asked a 100 times and you will never get an answer here on the forum. Its one of those trade secrets everyone always talks about.

  12. The Following 2 Users say Thank You for This Post by PartTimeScrapper:


  13. #9
    pcscrapper's Avatar
    SMF Badges of Honor

    Member since
    Aug 2012
    Location
    623 s Lyon st Suite 200 Sioux Falls SD 57104
    Posts
    657
    Thanks
    576
    Thanked 481 Times in 226 Posts
    I've opted out sending My stuff to a middle guy.. I produce enough now to send to a refiner.. Like Noble says... Its the person that have been there.. and have the knowledge of what to say and what not to say.. and how to say things, if you look dumb you'll get a dumb return.. basically... not saying You're dumb just saying.. so its best to seek one that has the ability to represent your product and pay them a percentage... one percent loss is better then 8 7 6 5 4 3 %

    So I'm with Noble on his comment.
    Please Add Us On FaceBook, PC SCRAPPER Sioux Falls SD
    also our Prices are listed here http://pcscrapperS.com
    PC Scrappers LLC
    623 S LYON ST SUUTE 200Sioux Falls, SD 57104
    1-605-271-2616

  14. The Following User Says Thank You to pcscrapper for This Post:


  15. #10
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Quote Originally Posted by BohemianLush View Post
    My idea is not to assemble two exactly identical loads, but to get as close as possible. Ex. 2 equal loads of 5k in green mobos, 5k in chinese mobos, 3k of telecom boards and 3k of boards recovered from a shredder. I figure that the yields should at the very least be comparable. This should at least give me an idea which refiner pays the most fair prices.
    The best way to make sure each refiner is being fair, is to process your material and take 3 correct representative samples of the resulting material. In this way the refiner knows you are serious and is far less likely to rip you off. They take one sample and do an assay on your material, then give you the results. Then you take a sample for yourself, and a ref sample. If you disagree with their assay, you have yours assayed. At that time you can either decide to split the difference between the two samples and come to a compromise, or you can have the third sample assayed by a referee assayer that will not be bias towards either party. At that point you can either take the ref assay, or decide to average the three, it all depends on what type of contract you sign for processing.

    My point is that you should be properly representing your material, having a representative sample taken, assayed, so you at least know what the average yield should be once your material is fully processed. You should also make sure that you are getting a "full accountability". If not, they will not pay you on the other metals that are not specifically mentioned in any contract you sign to process your material. Full accountability means you want to be fully paid on all values, including Pb, Cu, Zn, Sn, etc etc etc. In large amounts these other metals add up fast.

    Also, make sure the refiner you are dealing with is doing the actual refining, a lot of places send material out to secondary refiners to process. There are several people in Northern California who will accept material, lead you to believe they are processing here, but they ship it out of state to do so. The cost in shipping obviously will affect the yield, even if they are not telling you it does, it simply costs more to process.

    Quote Originally Posted by BohemianLush View Post
    Noble, please don't take offense to my statement about finding a refiner that will cheat me the least. I like your auto mechanic analogy. Basically it is the power of information. Those that have the power can choose to be fair or can choose to cheat you.
    I didn't take any offense. When I stated "who cheats you least" I really meant "why let anyone cheat you". It's similar to when I hear people say they are going to vote for the lesser of two evils. My view is why vote for anyone if they are all evil, you are in the end still voting for evil. Fortunately with refiners, if you conduct yourself well, and represent your material properly, you leave little room for them to cheat you. It's just like my mechanic analogy, if you are timing them on your watch, and watching what they do, they will be far less likely to cheat you or claim more labor was involved than there actually was. Also, refiners are just like mechanics, it's hard to find an honest one, so if you do keep them close and treat them right.

    Scott
    Last edited by NobleMetalWorks; 08-19-2013 at 05:48 PM.

  16. The Following User Says Thank You to NobleMetalWorks for This Post:


  17. #11
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Or maybe go over to the GRF and see what they have for good references for refiners like we have for buyers here.
    They don't pull any punches either,,,
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  18. The Following 6 Users say Thank You for This Post by Mechanic688:


  19. #12
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    You have so much stuff I could see the buyers compeating to get your stuff. I am sure you could lock in a price with someone as long as you have the amount of scrap needed...

  20. The Following User Says Thank You to hobo finds for This Post:


  21. #13
    BohemianLush started this thread.
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts
    Thanks everyone for your responses. Right now we are a small fry compared to some of the big boys. I am just trying to grow the business organically, and not try to get too big for my britches. Selling to a refiner seems like the next logical step. Once I figure everything out and get the results back I will give y'all a detailed report.

  22. The Following 3 Users say Thank You for This Post by BohemianLush:


  23. #14
    brandon's Avatar
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    North Carolina
    Posts
    787
    Thanks
    46
    Thanked 673 Times in 310 Posts
    I contacted a refiner once, I was told that I needed at least 100 lbs of ram, or at least 1 Gaylord of boards before they would talk to me. I still don't have that much ram saved up.
    My fortune cookie said:
    You discover treasures where others see nothing unusual.

  24. #15
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Quote Originally Posted by BohemianLush View Post
    Thanks everyone for your responses. Right now we are a small fry compared to some of the big boys. I am just trying to grow the business organically, and not try to get too big for my britches. Selling to a refiner seems like the next logical step. Once I figure everything out and get the results back I will give y'all a detailed report.
    If what you stated before this is true:

    Quote Originally Posted by BohemianLush View Post
    Once I find the right refiner I will ship them 20k-40k in weight every month. Right now we are pacing 40k for the month of August alone.
    For the most part I buy the scrap I process for several reasons, and only refine for a few people. In buying the scrap there is no argument about the yields, no room for dishonesty on either side, or for misinterpretation on how much the yield should be. I personally prefer to conduct my own business this way, however, if I were a recycle company accumulating e-waste in the amounts you stated you are, in other words if the tables were reversed, I would have it processed by a refiner instead of selling to one. There will be a substantial difference in the amount you will make. If the idea of representing your own material seems a bit daunting to you, post on GRF and ask for someone willing to represent your material for 1% of the yield. Someone who knows how to represent material will make up far more than that just insuring your material is processed properly.

    Scott

  25. The Following User Says Thank You to NobleMetalWorks for This Post:


  26. #16
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    246
    Thanks
    21
    Thanked 177 Times in 73 Posts
    Take my experience as a warning:

    I received a settlement from a refinery today. Prior to this, my experiences have been great, yields a touch lower than expected, but still plenty high enough that I could turn a reasonable profit and not have to worry about. My settlement today was an absolute slap in the face. I sent a mixed load of boards that had a composition that should have returned a fair profit. Instead, it returned (after refining expenses) less money than I would have gotten just by selling it outright to Mario.

    I never had representation of my lots by anyone, never requested a sample for independent assay, anything like that. And the refinery absolutely bent me over hard core as a result. I shipped in a load 25% larger than my previous loads, and returned 33% less gold.

    Just a fair warning for anyone that is thinking about going down this road.

  27. The Following 4 Users say Thank You for This Post by BumpRacerX:


  28. #17
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Please name the refiner so others may avoid them
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  29. The Following 2 Users say Thank You for This Post by BRASSCATCHER:


  30. #18
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    246
    Thanks
    21
    Thanked 177 Times in 73 Posts
    Sipi Metals.

    If you research them over at the GRF, you will find similar stories. I was warned by Noble, and many others to make sure my lot was properly represented, ask for a sample etc. Things were going well, so I didn't worry about it. And ended up taking a swift kick in the ass as a result.

  31. The Following User Says Thank You to BumpRacerX for This Post:


  32. #19
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Things were going well, so I didn't worry about it. And ended up taking a swift kick in the ass as a result.
    I guess as long as you got a kiss,,,,
    If you had seen the stories over on the other forum that should have been a warning,,,,Didn't any red flags pop up???
    Sorry to hear about the jabbin'

  33. #20
    SMF Badges of Honor

    Member since
    Aug 2011
    Posts
    246
    Thanks
    21
    Thanked 177 Times in 73 Posts
    Quote Originally Posted by Mechanic688 View Post
    I guess as long as you got a kiss,,,,
    If you had seen the stories over on the other forum that should have been a warning,,,,Didn't any red flags pop up???
    Sorry to hear about the jabbin'
    I had no clue (and still really don't) about getting proper representation and/or an assay. They are going to send me a sample of the load that I have that is already there. From there, I need to find someone to assay it for me that holds weight and can help me with the process.


  34. Similar threads on the Scrap Metal Forum

    1. refiners feedback
      By joshH in forum General - Let's talk business
      Replies: 16
      Last Post: 10-01-2012, 09:11 PM
    2. Escrap Refiners
      By eppdso in forum General Electronics Recycling
      Replies: 6
      Last Post: 02-02-2012, 07:29 PM
    3. Escrap refiners assayers
      By irondale in forum General Electronics Recycling
      Replies: 26
      Last Post: 01-30-2012, 12:23 AM
    4. Hi Y'all
      By Scrapette in forum Introduce yourself
      Replies: 13
      Last Post: 10-05-2011, 12:59 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook