Page 1 of 4 123 ... LastLast
Results 1 to 20 of 67

I need some help with a quote on this huge lot.

| E-Waste Grading and Identification
  1. #1
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts

    I need some help with a quote on this huge lot.

    Update: SCORE PICS ARE ON THE THIRD PAGE CHECK THEM OUT.





    Well today, I get a call from a guy, he is about 2 and half hours away from me. He starts going on about seeing my craigslist ad, didn't seem like he would have that much by the way he was talking, he started saying his supervisors wanted to get rid of some stuff in the storage room, he said he had about 100-150 towers alone, alot of other stuff, printers, servers, switch and alot of stuff. I don't know what to offer the guy since he is like 2 and half hours away, and if I offer him my regular prices, I would be paying alot with gas and paying for them, I was thinking about maybe paying 3 bucks a tower or something like that to compensate costs. Anyways here is the pictures that I almost went to the emergency room for cause I almost fainted LOL.

    By the way most of the big boxes on the shelves and stacked in the center contain computers aswell!







    They said they wanted a fair price on this server tower because it works, What would you offer on this? I mean would I be able to sell it or what? I told him I could probably only offer scrap price on it, but I may be able to offer better prices.
    Last edited by Kochy; 07-17-2013 at 10:24 PM.


  2. #2
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    .15 lb

  3. The Following User Says Thank You to MattInTheHat for This Post:


  4. #3
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    That would be really time consuming cause I don't have a big scale.

  5. #4
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Matt you don't pay a set price for towers and servers?

  6. #5
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I tell people "Sorry, but I'm buying it as scrap". I don't mess around with whether it works or not. If it works, they're better off selling it somewhere else. I learned that a long time ago when I was buying just batteries.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  7. The Following 5 Users say Thank You for This Post by Mick:


  8. #6
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Yeah, thats what I told him, I don't want to waste time selling it.


    What do you guys pay for switches, and servers a piece?

    I don't have them on my price sheet so I don't really know.

  9. #7
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    If i'm going that far, I'm going to do it by the lb

  10. #8
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Even for PC towers? I was thinking of giving him 3 bucks a piece on em.

  11. #9
    MattInTheHat's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    rock hill, sc
    Posts
    1,464
    Thanks
    1,142
    Thanked 1,396 Times in 703 Posts
    first you need to calculate how many trips and your cost per trip and divide that by how much stuff you are getting

  12. #10
    directrecycle's Avatar
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    520
    Thanks
    95
    Thanked 467 Times in 226 Posts
    personally, I would go
    $3 ea on the towers
    $2 - $3 ea on the switches
    $5 ea on the laptops

    take all monitors , mice, keyboards, and printers for free.

    You will make all your money back and more on the laptops alone

  13. #11
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Cincinnati, Ohio
    Posts
    285
    Thanks
    271
    Thanked 254 Times in 127 Posts
    Are they "complete" towers? Make sure that whatever price you give them leaves you covered in case you get there and maybe half of them are missing the RAM sticks, or hard drives, or whatever.

  14. #12
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    I'm probably not a good one to answer that as I don't get many and what I do get, I offer a set amount for the whole lot. But I figure servers at a little less than towers. Usually, about 10% to 20% less.

  15. #13
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    What do you think about $400, this is just a wild guess, but if you had to quote them on this and you were gunna give a whole price, what would it be? I kind of like the .15 lb idea, I've asked the gentlemen if he would be interested in that and I am waiting for a reply.

  16. #14
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    Kochy,

    So many variables to take into account, but I'll take a stab at it for you. I think you should quote a guy a price on the towers (emphasize that they need to be complete). You do have to take into account the travel you incur, but also figure that if you would drive 20 miles for 20 computers at $5 each, would you also drive 150 miles for 150 computers and still pay $5? Maybe drop it down to $4 per computer, or better yet just tell him $600 for the towers. The switches look like they are 48 port, which could have more than scrap value. But I would tell him $4 for a switch, maybe more depending on visual inspection. For scrap, they are fairly easy to take apart and should give you a real nice board, power supply, fans and steel. The servers could probably go for $10 each, but I would reserve that price until you can get a good look at them. The "working" server I would not quote a price until you can see it in person. In the meantime, get him to tell you the specs on the server and do some research online and ask any computer buddies to help you set a price.

    MOST IMPORTANTLY: Get him to agree on a price for the towers and tell him you are driving a LONG way to get them. Even give him a purchase order # (make one up) so that he feels completely tied to the agreement. This gets you in the door with an agreement to purchase. You don't want to get there and they changed their mind. Once there, you can negotiate the price on everything else. If you are already there and moving equipment, they will be highly motivated to sell you the remaining items at an agreeable price just to get them out. IMO, you need to call him today or tomorrow to make the agreement, and plan on being at his doorstep on Monday morning. I've found that the more time that goes by the less likely the sale will go through.

    edit: the prices above are just estimates...you can choose to pay more or less based on what your market dictates
    Last edited by Ecycle Atlanta; 07-11-2013 at 03:22 PM.

  17. The Following User Says Thank You to Ecycle Atlanta for This Post:


  18. #15
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Purchase order as like a agreement of sale? I have no idea about document writing and anything like that. What all would it have to consist of?

  19. #16
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    a purchase order is basically a way for a business to keep track of purchases it makes. The bookkeeper uses it to track expenses and expected invoices (accounts receivable). It would give your business the appearance of a professional organization, and psychologically may make your customer feel more obligated to the agreement instead of just a quote over the phone. Once the deal is made, just tell him that you will be issuing a company check with a purchase order # of 4721 (or whatever number suits your fancy). By the way, it may not be a bad idea to get in the habit of tracking your expenses, so you may want to incorporate PO's into every transaction you do if you intend to make this a serious business venture.

  20. #17
    Kochy started this thread.
    Kochy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Sunbury, PA
    Posts
    532
    Thanks
    214
    Thanked 276 Times in 138 Posts
    Are there any templates that I could print out, cause I don't really have time to make one.

  21. #18
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    Quote Originally Posted by Kochy View Post
    Are there any templates that I could print out, cause I don't really have time to make one.
    You don't need to make the form. Just tell the guy that if they are making up a bill of sale to use PO # ??? on the bill. Based on the amount of computers he is selling it is a big business. I'm sure he will know what to do.


    edit: and yes, you can simply google "purchase order templates"
    Last edited by Ecycle Atlanta; 07-11-2013 at 03:51 PM.

  22. #19
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts

  23. #20
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    You can also see one on Paypal if you use them. PO's that is..

    Sirscrapalot - Watching the thunder and rain roll in.


  24. Similar threads on the Scrap Metal Forum

    1. Just got a huge lot of e-waste due to footwork
      By andrew1990 in forum General Electronics Recycling
      Replies: 13
      Last Post: 02-27-2013, 10:38 PM
    2. new fav quote/bumper sticker:
      By EcoSafe in forum Off Topic Discussions
      Replies: 16
      Last Post: 12-26-2012, 07:15 AM
    3. A quote from an old thread
      By Scrapcrazy in forum A Day in the Life of a Scrapper
      Replies: 2
      Last Post: 07-19-2012, 08:37 PM
    4. Huge TV Lot, western Wisconsin
      By tyashinsky in forum Scrap Metal Spots
      Replies: 4
      Last Post: 04-17-2012, 10:40 PM

Page 1 of 4 123 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook