Results 1 to 20 of 20

Scrapping a vacuum cleaner

| Dismantling, Breaking Down & Maximizing Scrap
  1. #1
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts

    Scrapping a vacuum cleaner

    In response to the recent threads requesting videos and pictures about scrapping certain objects, I figured I would use my latest find: a newer vacuum cleaner.

    Taking apart a vacuum cleaner is pretty quick and easy.



    To start with, I removed the blue filter on the front.

    Then I removed quite a few screws to get to the inside


    The upper part is the front where the motor is. The lower part is the back where the cord is in some kind of retracting thing.

    I started with the cord. I took the white plastic thing out, unscrewed both halves, and the cord just lifted out along with some kind of steel spring that popped out at me.

    This is the cord, steel spring, and front half of the vacuum cleaner.


    The motor pretty much came out and the wires just had to be cut.

    Here you can see the motor and wires as well as the plastic I've started saving in the background.

    Totals:

    Insulated wire: about 1/3-1/2 lb.
    Motor: about 1 1/2 lb.
    Steel: less than an ounce
    ABS plastic: 2-3 lbs.
    Garbage: about 1 lb.

    Keep in mind this is a newer, smaller vacuum and older ones will probably have more. Also, I don't plan on breaking down the motor, so that's a bit of a loss too. Any questions, feel free to ask.
    Last edited by Scrap man; 08-26-2011 at 08:29 PM.
    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  2. The Following User Says Thank You to Scrap man for This Post:



  3. #2
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Looks good to me. I wish all vacuum motors were that easy to get too.

  4. #3
    Dumpster-Dee's Avatar
    SMF Badges of Honor



    Member since
    Feb 2011
    Location
    SW Georgia
    Posts
    1,775
    Thanks
    2,286
    Thanked 838 Times in 457 Posts
    me too.....I LOVE braking *( lol ) down those little motors. So little effort for so much reward ! Not so much monetarily as in the satisfaction of seeing my copper bucket fill up. Like I always say, it just comes down to a personal choice.
    * BRAKE...slow down, stop. BREAK.....crack open !!!!!!

  5. #4
    SMF Badges of Honor


    Member since
    May 2011
    Posts
    187
    Thanks
    12
    Thanked 63 Times in 29 Posts
    I don't like vacumn cleaners too much, alot of debris and little metal to show for it. Strangely, I tore apart a "Clorox brand Swiffer" the other day and was completely amazed at how complex and full of motors, wires, etc. the thing was. This was the one that you push a button and it squirts cleaner from a bottle that you stick on the front. I tore it down because the handle was al extrusion.

  6. #5
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    There isn't a lot of metal, but they are pretty quick to break down, so they kind of cancel eachother out. They aren't my favorite, but they are good for a quick buck.

    I just scrapped a Swiffer brand thing a few days ago, except I cut out the center section of the aluminum handle and threw the rest in a dishwasher. I might have to do a double-take on it. Thanks

  7. #6
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    I just noticed the new category about breaking down stuff. I think this thread would be better there. If Admin or some other moderator thinks so too, go ahead and move it.

  8. #7
    Dawsey is offline Metal Recycling Entrepreneur
    Dawsey's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Posts
    125
    Thanks
    11
    Thanked 11 Times in 8 Posts
    I stripped a Dyson not long ago and the motor was really hard to get into. I had to get my friend to hold a screwdriver and I was holding one as well and I slowly hit each one until the metal casing literally shot off!


  9. #8
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    Dysons are big bucks. I would have taken it in to see if it could be fixed. For cheep of course!

  10. #9
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Yeah a 100 dollar fix on a dyson will still net you a 200 dollar dyson at the least to sell on ebay. Not to mention you could probable sell it outright to a used vacuum store.

  11. #10
    con's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    Denver
    Posts
    17
    Thanks
    3
    Thanked 3 Times in 3 Posts
    I have found that 2 or 3 good hits with a sledgehammer separates the motor and wiring, nicely from most modern vacuum cleaners.
    Beats the heck out of fiddling with all them little screws
    Con
    Quote Originally Posted by Scrap man View Post
    In response to the recent threads requesting videos and pictures about scrapping certain objects, I figured I would use my latest find: a newer vacuum cleaner.

    Taking apart a vacuum cleaner is pretty quick and easy.



    To start with, I removed the blue filter on the front.

    Then I removed quite a few screws to get to the inside


    The upper part is the front where the motor is. The lower part is the back where the cord is in some kind of retracting thing.

    I started with the cord. I took the white plastic thing out, unscrewed both halves, and the cord just lifted out along with some kind of steel spring that popped out at me.

    This is the cord, steel spring, and front half of the vacuum cleaner.


    The motor pretty much came out and the wires just had to be cut.

    Here you can see the motor and wires as well as the plastic I've started saving in the background.

    Totals:

    Insulated wire: about 1/3-1/2 lb.
    Motor: about 1 1/2 lb.
    Steel: less than an ounce
    ABS plastic: 2-3 lbs.
    Garbage: about 1 lb.

    Keep in mind this is a newer, smaller vacuum and older ones will probably have more. Also, I don't plan on breaking down the motor, so that's a bit of a loss too. Any questions, feel free to ask.

  12. #11
    Curbside shopper's Avatar
    SMF Badges of Honor

    Member since
    Aug 2011
    Location
    Pa
    Posts
    317
    Thanks
    171
    Thanked 289 Times in 152 Posts
    Some vacuums will surprise you.

    I've picked up a few that were "like new" in need of only a simple fix and re-sold them for $25 and up depending on the model.

    The vintage one's are sometimes worth researching, as their are quite a few collectors now. Just an example.

    http://cgi.ebay.com/Vtg-EUREKA-EMPRE...-/320742298183

  13. #12
    YoungScrapper's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Middlesex NC
    Posts
    30
    Thanks
    3
    Thanked 0 Times in 0 Posts
    i just broke down like 4 vacuums and 1 of them had like a 20 or 25ft power cord. So i tossed that in my insulated copper bucket. now there waiting to be striped as soon as i can get a wire striper. and for the motors i finally got a grinder so im gonna cut into them. i like takin them apart cuz there easy to take apart especially with a electric screwdriver.

  14. #13
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by YoungScrapper View Post
    soon as i can get a wire striper. .
    There is a cheap one either at walmart or lowes...fyi
    George Beale - Founder & President - info@viprecyclingjunkremoval.com
    VIP Recycling Junk Removal LLC - Premier Scrap Metal, Junk, & Electronic Recyclers!
    http://www.viprecyclingjunkremoval.com

  15. #14
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Quote Originally Posted by Scrap man View Post
    There isn't a lot of metal, but they are pretty quick to break down, so they kind of cancel eachother out. They aren't my favorite, but they are good for a quick buck.

    I just scrapped a Swiffer brand thing a few days ago, except I cut out the center section of the aluminum handle and threw the rest in a dishwasher. I might have to do a double-take on it. Thanks
    I love those swiffers! Not much break down, not much waste. I couldnt believe the little armatures and wires in them either!
    Scrap man, why did you put the center part in the dishwasher?? What did your wife say (if you are married) when she found it?

  16. #15
    YoungScrapper's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Middlesex NC
    Posts
    30
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by GeorgeB View Post
    There is a cheap one either at walmart or lowes...fyi

    yeah iv got like a $25 pair but i saw another wire stripper i want but kinda expensive but its drill powered and from what i understand on the youtube videos you put a nutdriver in the chuck but i gotta take some metal to the scrap yard to help pay for that. I spent the last of my money on a grinder from northern tool and from what iv done so far it awesome!!!!!! a 7" grinder electric for almost $75 so money well spent.........but thanks GeorgeB for the fyi i just got like almost half a bucket full of insulated copper wire and dont want to use the pair i got now but im not in a real big hurry to get the wire stripper until my bucket fills up and i got a long way to go.

  17. #16
    GeorgeB's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Manassas Park, VA
    Posts
    2,919
    Thanks
    462
    Thanked 639 Times in 432 Posts
    Quote Originally Posted by YoungScrapper View Post
    yeah iv got like a $25 pair but i saw another wire stripper i want but kinda expensive but its drill powered and from what i understand on the youtube videos you put a nutdriver in the chuck but i gotta take some metal to the scrap yard to help pay for that. I spent the last of my money on a grinder from northern tool and from what iv done so far it awesome!!!!!! a 7" grinder electric for almost $75 so money well spent.........but thanks GeorgeB for the fyi i just got like almost half a bucket full of insulated copper wire and dont want to use the pair i got now but im not in a real big hurry to get the wire stripper until my bucket fills up and i got a long way to go.
    Your welcome. I have noticed a few different types of wire strippers myself that are used for a variety of wire. So far, I have noticed like 3 or 4 different kinds.

  18. #17
    Scrap man started this thread.
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    Quote Originally Posted by newattitude View Post
    I love those swiffers! Not much break down, not much waste. I couldnt believe the little armatures and wires in them either!
    Scrap man, why did you put the center part in the dishwasher?? What did your wife say (if you are married) when she found it?
    I meant I threw the top and bottom part in a dishwasher. The middle part want in my aluminum pile. And it was a scrap dishwasher, not a working one. About marriage, I'm only 15, so I'd have to worry more about my mother than a wife on something like that LOL.

  19. The Following User Says Thank You to Scrap man for This Post:


  20. #18
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Ahhhhhhh!!! My bad! I went back and it was me that misunderstood what you said! sorry! lol

  21. #19
    YoungScrapper's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Middlesex NC
    Posts
    30
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by GeorgeB View Post
    Your welcome. I have noticed a few different types of wire strippers myself that are used for a variety of wire. So far, I have noticed like 3 or 4 different kinds.
    here is a youtube link hopefully itll work.

  22. #20
    SMF Badges of Honor


    Member since
    Sep 2011
    Posts
    39
    Thanks
    1
    Thanked 7 Times in 5 Posts
    lol that would of went straight to my shred pile lol


  23. Similar threads on the Scrap Metal Forum

    1. Question about vacuum cleaners HELP!
      By Randy_B_Scrappin in forum Scrap Metal Tips and Advice
      Replies: 44
      Last Post: 09-11-2016, 11:25 AM
    2. Vacuum cleaner motors
      By Greg66 in forum Scrap Metal Spots
      Replies: 28
      Last Post: 12-03-2012, 09:41 AM
    3. Scrapping a vacuum cleaner
      By Scrap man in forum Scrap Metal Tips and Advice
      Replies: 5
      Last Post: 08-26-2011, 08:26 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook