Page 1 of 2 12 LastLast
Results 1 to 20 of 38

Uneducated (or just plain stupid) scrappers..

| A Day in the Life of a Scrapper
  1. #1
    BohemianLush started this thread.
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Denver
    Posts
    343
    Thanks
    5
    Thanked 366 Times in 147 Posts

    Uneducated (or just plain stupid) scrappers..

    I ocassionally take a stroll out to the shred pile at work and will pull out sealed tanks, non-ferrouos items and other stuff that doesn't belong in there. Today I just walked out there and pulled out 30 pounds of #2 insulated wire, about 20 pounds of clean yellow brass and some other tools that I could use. While I was there I saw a guy throwing a bunch of cast parts in there. I put a magnet to them and it didn't stick so I told him to take them to our non-ferrous yard directly across the street and we would pay him $.22 a pound. He said he wasn't concerned about it and just left. All and all he probably threw 300-400 pounds of 50% cast breakage in the shred pile leaving close to $50 on the table. Sometimes I am astounded at the stuff people throw in there! While all this was going on, some of the guys that work on the ferrous yard were hitting about 20 pay phones that one of my customers brought in with sledge hammers to extract the quarters that were left in them. Between the three of them they all made about $30 each in quarters and were walking around with their pockets full and a smile on their face.

    The funny thing is, when the guy brought the pay phones in I picked one up and shook it and heard money in there. I told him that there were still quarters in there and he said he didn't care because he didn't have a key to open them. All of this happened within about 10 minutes of me being on the yard. That be said I will now write up a proposal to my boss encouraging him to hire a guy to simply work the shred pile. He would pay for himself by pulling upgrades out of the shred pile and he could also help customers unload by hand, making our customer service that much better.



    Thats my rant for the day.

  2. The Following 10 Users say Thank You for This Post by BohemianLush:



  3. #2
    wayne's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    UK
    Posts
    319
    Thanks
    117
    Thanked 265 Times in 127 Posts
    Personally I would ask if I could buy items from the shred pile for the same cents on the pound your boss gets when he sells it. Bring in a trailer, load up then drive it across the road yourself. Or a variation thereof.
    I know lying is wrong, but if the elephant man came in now in a blouse with some make up on, and said, "How do I look?" Would you say, bearing in mind he's depressed and has respiratory problems, would you say, "Go and take that blusher off you mis-shapened elephant tranny?" No. You'd say, "You look nice... John""

  4. The Following User Says Thank You to wayne for This Post:


  5. #3
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Eastern Ontario
    Posts
    294
    Thanks
    139
    Thanked 242 Times in 119 Posts
    I see the same things all the time at the yards too. I used to think they are uneducated or stupid like you suggest, but I really believe they are just that lazy. Probably go home a drink their beer and smoke their weed and complain about how hard life is.
    Buying E Waste from all across Canada


  6. The Following 3 Users say Thank You for This Post by devo:


  7. #4
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    By me you need ID and fingerprint to turn in any metal except steel and alum cans to get paid. I see lots of stuff in the piles as well...

  8. #5
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    Stainless steel sinks, cast aluminum grills, ceiling fan motors, extension ladders, most common items I see in the steel pile on a weekly basis.

  9. #6
    mongo's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Hudson, FL
    Posts
    79
    Thanks
    0
    Thanked 23 Times in 10 Posts
    If somone bringing in shred saw somthing are you allowed to grab it and pay shred price for it? or would be a yard by yard rule?

  10. #7
    SMF Badges of Honor


    Member since
    Sep 2011
    Posts
    152
    Thanks
    30
    Thanked 47 Times in 29 Posts
    How do you end up with 20 pay phones with money still in them but not have a key? Did the guy dropping them off have any paperwork from the phone company?

  11. #8
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    I see stuff all the time, from complete towers to motors, wire ect. Makes me ill.

  12. #9
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    Like i always say if you have time at work to go through the shredd pile then you obviously aren't doing your other job. My point being whats going on in that shredd pile doesn't concern you at all and isn't making the company any money by having an hourly employee look through the pile to see whats in it and what isn't in it. It doesn't concern you and you should get back to work doing your normal job at the yard. My pet peeve is people taking time away from the company to go through a pile and pick out something that they want to take home. Honestly you shouldn't be out of your department or your crane. Now get back to work.

  13. #10
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    So you would'nt pay someone to go thru the pile?

  14. #11
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Pistone I have decided you are just plain pissed off at the world and aren't getting your share of sugar booger.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  15. The Following 8 Users say Thank You for This Post by KzScrapper:


  16. #12
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    Quote Originally Posted by PistoneScrapProcessing View Post
    Like i always say if you have time at work to go through the shredd pile then you obviously aren't doing your other job. My point being whats going on in that shredd pile doesn't concern you at all and isn't making the company any money by having an hourly employee look through the pile to see whats in it and what isn't in it. It doesn't concern you and you should get back to work doing your normal job at the yard. My pet peeve is people taking time away from the company to go through a pile and pick out something that they want to take home. Honestly you shouldn't be out of your department or your crane. Now get back to work.
    Goodness man, They're not paid to pay attention? look around? know what's going on? try to improve the place? Your post reminds me of a story my aunt told about a spinach packing place she worked at. Some reason she had nothing to do, and noticed the number of caterpillars in the spinach, so she grabbed a box and started picking them off and tossing them in. Soon after, the boss came by and asks what she's doing, "we don't have time for that, come on, I'll find you something else". Enjoy your spinach

  17. The Following 6 Users say Thank You for This Post by Bear:


  18. #13
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    Not plain pissed off my pet peeve is people who are supposed to be operating equipment on the ground sorting through piles. You have 8 hours at a scrap yard to get work done even 10 mins of not working can have a cascading effect throughout the yard as to what gets loaded unloaded and crane placement get thrown out of whack. Tripping over dollars to make a few dimes. They bought it as shredd ship it as shredd. I see the big picture when others see a small window.

  19. #14
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Eastern Ontario
    Posts
    294
    Thanks
    139
    Thanked 242 Times in 119 Posts
    So if someone throws 100 lbs of copper pipe in your shred pile, you wouldn't take 2 minutes to grab what you could.
    Last edited by devo; 05-05-2012 at 12:13 AM.

  20. The Following User Says Thank You to devo for This Post:


  21. #15
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    Quote Originally Posted by PistoneScrapProcessing View Post
    Not plain pissed off my pet peeve is people who are supposed to be operating equipment on the ground sorting through piles. You have 8 hours at a scrap yard to get work done even 10 mins of not working can have a cascading effect throughout the yard as to what gets loaded unloaded and crane placement get thrown out of whack. Tripping over dollars to make a few dimes. They bought it as shredd ship it as shredd. I see the big picture when others see a small window.
    Nose to the grindstone, that's true as well.

  22. #16
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    More jobs in the yard then processing the chit...How many locomotives come in on the back of someone's jalopy so far this year PSP? Peddlers are just part of what crosses the scales.

  23. #17
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    Kz I think we might see this issue of sorting through the shredd differently. I look to attach a dollar value to everything going on in the yard. Let's put it like this that crane should be making a hundred dollars plus an hour. Taking 15 mins to pull out 30 bucks worth of material out of the pile doesn't make sense when they should just move and process the material in the yard. I have been in meetings with employees and yard managers where the employees got there sh$t jumped for going through the shredd instead of putting the shredd in the pile and getting back to making bales. they were taking washers and dryers and crushing them with grapple then getting out there crane to pick up a dollar how is the yard supposed to make money doing that.

  24. #18
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Louisiana
    Posts
    255
    Thanks
    74
    Thanked 72 Times in 49 Posts
    At my yard I've seen people bring in whole washers dryers etc. When the workers unload the scrap with their grapples they intentionally pull the motors out of them with a yank and throw them in a whole different pile. Now I know that it's not the same as walking around picking but part of their jobs is sorting the scrap.

  25. #19
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Ardmore, OK
    Posts
    92
    Thanks
    107
    Thanked 76 Times in 30 Posts
    According to my math, BohemianLush was making the yard a much higher hourly rate than the crane guy at that particular time.

    30lbs Insulated #2 = 41.70 at 1.39 per lb
    20lbs yellow brass = 40.00 at 2.00 per lb
    Cast Breakage = extra 50.00

    He states this all happened in about a 10 minute time period.

    10 minute total = $131.70
    Hourly rate = $790.20
    Crane guy = $100.00 hourly
    Last edited by cobre collector; 05-05-2012 at 09:30 AM.

  26. The Following 7 Users say Thank You for This Post by cobre collector:


  27. #20
    High Voltage Processing's Avatar
    SMF Badges of Honor

    Member since
    Sep 2011
    Location
    Allentown PA
    Posts
    316
    Thanks
    63
    Thanked 201 Times in 101 Posts
    Quote Originally Posted by cobre collector View Post
    According to my math, BohemianLush was making the yard a much higher hourly rate than the crane guy at that particular time.

    30lbs Insulated #2 = 41.70 at 1.39 per lb
    20lbs yellow brass = 40.00 at 2.00 per lb
    Cast Breakage = extra 50.00

    He states this all happened in about a 10 minute time period.

    10 minute total = $131.70
    Hourly rate = $790.20
    Crane guy = $100.00 hourly
    Wow that's looking at the big picture. We could take this a step farther and use a statistical study to determine what per cent age of material should not be in there and see just how much money we are losing. When I get a bale in I sample it to make sure it is the advertised recovery. Its amazing how easy it is to find dines and how hard it is to find dollars. I wish I had more employees who thought about how they could make me more money.
    Jim Dwyer
    President/Founder High Voltage Processing
    www.highvoltagepro.com
    484-226-9323


  28. Similar threads on the Scrap Metal Forum

    1. Replies: 13
      Last Post: 09-16-2013, 02:34 PM
    2. Is this guy a scammer or just plain stupid?
      By CanIScrapIt in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 04-06-2013, 06:42 PM
    3. Stupid cows.
      By Hypoman in forum A Day in the Life of a Scrapper
      Replies: 22
      Last Post: 12-14-2012, 06:27 PM
    4. Stupid Question
      By junkyardjunky in forum Scrap Metal Tips and Advice
      Replies: 2
      Last Post: 04-28-2011, 06:27 PM
    5. This might be a stupid question.......
      By jk19 in forum Scrap Metal Questions and Answers
      Replies: 3
      Last Post: 04-25-2011, 10:58 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook