Results 1 to 13 of 13
  1. #1
    SKWrapper started this thread.
    SKWrapper's Avatar
    SMF Badges of Honor

    Member since
    Apr 2018
    Location
    Denver, CO
    Posts
    72
    Thanks
    103
    Thanked 53 Times in 34 Posts

    What's your record load in weight - for those that collect "bulk scrap"?

    Yesterday I met or exceeded my Dakota's payload @ 1220 lbs - still not sure what the payload capacity is. That's my record so far in weight but not $$. I actually think it was 1240 but the scale operator printed the ticket before it "settled" on the way out, I didn't bother to let him know either. No biggie.


  2. The Following User Says Thank You to SKWrapper for This Post:



  3. #2
    SMF Badges of Honor

    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    79
    Thanks
    56
    Thanked 89 Times in 47 Posts
    58k Lbs of offset lithograph new paper printing presses from back in March. Not my truck or trailer though.


    [IMG

    ][/IMG]

  4. The Following 2 Users say Thank You for This Post by 520:


  5. #3
    Proton's Avatar
    SMF Badges of Honor

    Member since
    May 2018
    Location
    USA
    Posts
    189
    Thanks
    141
    Thanked 131 Times in 76 Posts
    Terex 82-30 cut up for scrap.


  6. The Following 2 Users say Thank You for This Post by Proton:


  7. #4
    greytruck's Avatar
    SMF Badges of Honor



    Member since
    Jan 2012
    Location
    Thornton, Illinois
    Posts
    1,298
    Thanks
    966
    Thanked 849 Times in 476 Posts
    1540lbs of shred steel in my old 1983 chevy C-10

  8. The Following 2 Users say Thank You for This Post by greytruck:


  9. #5
    Lexwallm's Avatar
    SMF Badges of Honor

    Member since
    Jul 2017
    Location
    Florida
    Posts
    75
    Thanks
    45
    Thanked 82 Times in 34 Posts
    about 2,400 lbs on my 5x10, maybe put some of it in the vehicle

  10. The Following User Says Thank You to Lexwallm for This Post:


  11. #6
    Stargate1's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Location
    Loganville, GA
    Posts
    80
    Thanks
    10
    Thanked 57 Times in 23 Posts
    I'm ashamed to put mine - about 900 lbs at once. Mostly steel, but about 150 in AL, and about 30 in Cu.

  12. The Following 2 Users say Thank You for This Post by Stargate1:


  13. #7
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,040
    Thanks
    2,342
    Thanked 3,499 Times in 1,337 Posts
    I'm not sure what the total weight was but a 3/4 ton van fully loaded with servers, battery backups and computers have made for an exciting ride home many times.

  14. The Following User Says Thank You to jimicrk for This Post:


  15. #8
    SMF Badges of Honor


    Member since
    Feb 2014
    Posts
    147
    Thanks
    72
    Thanked 179 Times in 74 Posts
    I average 2 tons per load (pick up and flat deck trailer). I turn in 20 metric tons per month at the yard.

  16. The Following User Says Thank You to bullion for This Post:


  17. #9
    Proton's Avatar
    SMF Badges of Honor

    Member since
    May 2018
    Location
    USA
    Posts
    189
    Thanks
    141
    Thanked 131 Times in 76 Posts
    Quote Originally Posted by Proton View Post
    Terex 82-30 cut up for scrap.

    This load was entertaining, when the trucker dropped the trailer in our yard the ground was frozen and he never put any blocking under the landing gear. Three days later we had a heat wave, the landing gear sank about a foot before finding solid ground.

    Loading the cut up Terex I noticed the tires on the trailer were squatting a bit low in the sidewall and decided to call it quits on the load, made a call to the yard to bring another trailer and pick the loaded one up.

    Guy drops the empty then lets the air out from the bags to lower the truck so that he could get under the load, no go the trailer is to low. I had an old GSW excavator that the ready mix plant had loaned me a year earlier. Fired the old Deutz 6 cylinder diesel up then proceeded to excavate some gravel from under the front of the trailer making a ramp for the tractor to back under.

    Air bags deflated he's now hooked to the king pin, were standing there chewing the fat and I ask him what he figures the load weighs. He says I'll be able to tell you once the bags are aired up from the gauge.

    Just after he says that there's this incredible loud explosion and the air bag next to us blows, now of course he's not able to use the air gauge to get the weight on the trailer.

    I tell him that I think he's over weight and that I would show him a way to avoid the highway scales, the next day when I phoned the yard they told me the trailer was 12,000 lbs over. It's a good thing the driver listened to my suggestion to avoid the scale, that would have been one heel of a ticket.

  18. The Following User Says Thank You to Proton for This Post:


  19. #10
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,351
    Thanks
    8,356
    Thanked 5,764 Times in 1,784 Posts
    I cannot tell you the exact weight of my heaviest load but know it is nothing compared to the 29 tons Proton and 520 have hauled. That is a lot of weight.
    As a scrapper I hope to return more to society than I use.

  20. #11
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,351
    Thanks
    8,356
    Thanked 5,764 Times in 1,784 Posts
    Quote Originally Posted by jimicrk View Post
    I'm not sure what the total weight was but a 3/4 ton van fully loaded with servers, battery backups and computers have made for an exciting ride home many times.
    It has been a long time since I have seen a van doing a wheelie.

  21. The Following User Says Thank You to Patriot76 for This Post:


  22. #12
    SKWrapper started this thread.
    SKWrapper's Avatar
    SMF Badges of Honor

    Member since
    Apr 2018
    Location
    Denver, CO
    Posts
    72
    Thanks
    103
    Thanked 53 Times in 34 Posts
    Quote Originally Posted by Stargate1 View Post
    I'm ashamed to put mine - about 900 lbs at once. Mostly steel, but about 150 in AL, and about 30 in Cu.
    Nothing to be ashamed about! That's good!! Especially 150 in aluminum.

    I'm not far off from that and I am not ashamed! I've got a little RWD mid-sized pickup so for me anything over 750lbs is kick butt - lots of these people have trailers and big equipment and big trucks, permits and licenses and what not. If it's a contest I, would certainly lose!

  23. #13
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Maple Ridge, BC, Canada
    Posts
    223
    Thanks
    82
    Thanked 256 Times in 106 Posts
    My largest pick up in one load was about 8,000 lbs of servers. I had to hire someone with a larger truck and power tailgate to bring it all back to the shop. There is an old post about it with photos. My largest sale ever was last month, about 3,900 lbs of motherboards, finger cards, telecom boards, cell phones, RAM, CPU, etc.

  24. The Following 2 Users say Thank You for This Post by aurum:



  25. Similar threads on the Scrap Metal Forum

    1. Looking for an "Above Scrap Pricing" Buyer for "R" Type RAM
      By sledge in forum Computer Recycling
      Replies: 1
      Last Post: 04-21-2015, 06:52 PM
    2. Topped off Christmas by going to see the "mega load"
      By IdahoScrapper in forum A Day in the Life of a Scrapper
      Replies: 1
      Last Post: 12-25-2013, 07:47 PM
    3. Replies: 11
      Last Post: 07-08-2013, 03:11 PM
    4. weight of processors and "weather" question
      By Ecycle Atlanta in forum Scrap Metal Questions and Answers
      Replies: 14
      Last Post: 10-16-2012, 08:06 AM
    5. MY First Ewaste "Mother Load"
      By mikedmissouri in forum General Electronics Recycling
      Replies: 14
      Last Post: 02-05-2012, 02:49 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook