Page 3 of 4 FirstFirst 1234 LastLast
Results 41 to 60 of 78

metal from the sticks - Page 3

| A Day in the Life of a Scrapper
  1. #41
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    There are a variety of four legged critters as well. The deer in velvet was in our yard.





    I found this baby mountain lion with a 30 in. tail (the tail is underneath) on our property . Local authorities determined it had been poisoned. You might understand why my wife carries a gun when on her daily walks, why every vehicle has rifles in them, and why my dogs are so important to my work. In addition we have bobcats, coyotes, bears, elk, and moose. This is for anyone that thought the racoons were cute.


    Give back more to this world than we take.

  2. The Following 5 Users say Thank You for This Post by Patriot76:



  3. #42
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Florida
    Posts
    89
    Thanks
    137
    Thanked 194 Times in 59 Posts
    You are making me miss my native Wyoming. I lived in the Black Hills area near Devils Tower National Monument. The wildlife there is very similar to yours. From what part of SD do you ranch?

  4. The Following User Says Thank You to snorton1 for This Post:


  5. #43
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    A variety of opportunities have presented themselves over the years. A good job in the winter is the oil fields. The tanks are tipped over, cut with a torch, and loaded into tubs provided by the scrap yard. I clean the field and keep all scrap metal proceeds. The owners deal with the EPA regulations and hire the clean out services. Some yards will not take oil field pipe because the ground radiation sets off their sensors and some pipe could be explosive in nature. In the past I have only dealt with the tanks and drills and left the pipe for larger company's. This is a picture of one of three fields I hope to complete next winter. If all goes as planned there will be a total of 35 tanks.



  6. The Following 6 Users say Thank You for This Post by Patriot76:


  7. #44
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Many members of the forum have full time jobs in addition to scrapping. I do to, it is called retirement. The problem with retirement is you never get a day off or a vacation. So this is part of my lifestyle.

    First load on my new trailer was not scrap. I had to haul my toys from the cabin back to the ranch. On the trailer from front to back is home made wagon, snow sled, and rock boat for my Persian's.



    To give you an idea of there size, these two are bigger than most Clydesdales. Compare the size of their heads to my back and they are 15 ft. away.



    Another perspective, Jake and John with some of their friends. The rest of the horses in the pictures are quarter horses except the paint. The paint was adopted from the BLM and is a big horse.



    Hunting, fishing, horses, and scrapping keep me alive.
    Last edited by Patriot76; 07-04-2018 at 07:41 AM.

  8. The Following 8 Users say Thank You for This Post by Patriot76:


  9. #45
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    The picture shows my partner going to work at a typical scrap site. She will flush the varmints out before I start working. On the ground is an old steel platform from an old combine, a pickup box trailer, and the blue backup. The steel platform was saved for a future trailer and the pickup flatbed with propane fuel system was also saved for resale.


  10. The Following 6 Users say Thank You for This Post by Patriot76:


  11. #46
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This a self contained lift gate for a truck. This was given to me after scrapping a potatoe chip plant. It is brand new and I will either use it or sell it. Nice bonus.


  12. The Following 5 Users say Thank You for This Post by Patriot76:


  13. #47
    SMF Badges of Honor


    Member since
    Apr 2018
    Location
    United States
    Posts
    268
    Thanks
    212
    Thanked 179 Times in 97 Posts
    Quote Originally Posted by Patriot76 View Post
    This a self contained lift gate for a truck. This was given to me after scrapping a potatoe chip plant. It is brand new and I will either use it or sell it. Nice bonus.

    Scrapping a potato chip plant. Is that code for eating way too much?

    Actually, I have to admit these are some very impressive photos that you took. It would be funny if someone did a spoof on your thread and posted very small quantities of everything. For instance, "Here is a photo of me taking two aluminum cans to the local scrap yard. This next picture is the guy at the yard laughing- he was laughing AT me not with me..."

  14. The Following User Says Thank You to recyclersteve for This Post:


  15. #48
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Took the day off from my full time job to do a little scrapping. Cleaned up a body shop and heating/cooling company.







    Last edited by Patriot76; 07-07-2018 at 09:44 PM.

  16. The Following 5 Users say Thank You for This Post by Patriot76:


  17. #49
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Cleaning up after myself includes removing all trash and evidence that I was there. The chemical tote was added to allow the shop to sort the prepared. Other totes will be added so they can sort out the non-ferrous.







  18. The Following 7 Users say Thank You for This Post by Patriot76:


  19. #50
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This is the result of cleaning up today. The first trailer is all body shop materials with about a ton of prepared on the bottom. The second trailer is a combination of the central air units and the non-ferrous from the body shop. Our scrap yards are not open on weekends so this is a common strategy of loading up to four trailers on the weekend, ready to be hauled.





  20. The Following 8 Users say Thank You for This Post by Patriot76:


  21. #51
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    The central air units are handled multiple times. They are loaded on the trailer, unloaded and stored in the shed, broken down in the winter, and sold when the price is good. The shed has about 30 units waiting for winter and by the time they are broken down there should be about 60.


  22. The Following 9 Users say Thank You for This Post by Patriot76:


  23. #52
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Just had shoulder replacement surgery yesterday. Cobalt, chrome, titanium, vanadium, stainless steel, aluminum, nickel, hafnium, silicon, cobalt-chrome, tungsten, and zirconium are used to manufacture artificial joints. Two knee and two shoulder replacements make me a walking pile of $crap and a good payday for the family when I die. Still reinvesting profits back into scrap.

  24. The Following 2 Users say Thank You for This Post by Patriot76:


  25. #53
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Godspeed in your recovery sir.

    Getting a new knee next spring if I can wait that long...how would you compare the replacements to say, when you were 30ish?
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  26. The Following User Says Thank You to KzScrapper for This Post:


  27. #54
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Quote Originally Posted by KzScrapper View Post
    Godspeed in your recovery sir.

    Getting a new knee next spring if I can wait that long...how would you compare the replacements to say, when you were 30ish?
    I got my knees replaced about 12 years ago and it was a life changing event. I had to walk up and down stairs sideways and the pain was unbelievable. I felt like a new man and grew 3/4 of an inch. I loved long distance running and had to give it up after the replacements. Other than that I can still ski, water ski, ride horse, hike, etc. Take the time to research the different products as there is a difference. I will put a tip for you in the members only area. Good luck.

  28. The Following 2 Users say Thank You for This Post by Patriot76:


  29. #55
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    I responded to several threads on the forum about my strategies with the soft market. It involves investing because of the belief that more money is made when prices are in a trough than at their peak. Some investors sell their stocks when the market is down because they are afraid to loose more money while others will double down on their investments taking advantage of the lower prices. It is my belief that those that sell are guaranteeing a loss in their investment.

    Equipment is being purchased for two reasons: Many scrappers are giving up and selling their equipment at lower prices and when I buy it my competition in the future decreases. As a one man operation I have the flexibility to change directions on a moments notice. Posted below is an auction advertisement that might interest some of you and highlights my strategy on a larger scale. They are essentially selling a turn key operation. The owner is evidently getting out of the business during a trough. The buyers at the auction are doubling down on their investments.

    SMF also demonstrates this theory because it is a microorganism of the scrap market. As prices continue to drop the number of active members on the forum will decrease. As the prices rebound, members will return and an influx of new members will join for information and a piece of the pie. In this situation those that double down continue to gather knowledge and experiment. They will be ready to roll at the start of the rebound.

    https://wavebid-prod.s3.amazonaws.co...6de856de96f85f

  30. The Following 6 Users say Thank You for This Post by Patriot76:


  31. #56
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    I was reading another thread and thought I would share some insight without hijacking their thread. My average load ranges between 3 and 6 tons using some rebuilt trailers and factory pickups. Anything less is cost prohibitive because of the distance to the scrap yard. To increase safety, comfort level of the load, and ability to haul more remember a chain is only as strong as the weakest link. This is my strategy:

    Brakes are the most important component to consider in both the tow vehicle and any trailer. Investing in the best heavy duty brakes available and the ability to down shift will increase the life expectancy and safety of the vehicle. Tire ratings are the next important consideration in IMO. Tires will limit the size of loads more than anything else and seeking the maximum ply and running at maximum psi reduces flats. My trucks run at 80 psi and have a load rating around 3,000 pounds each. The trailer tires have a minimum of 14 plys, have a load rating of about 2 tons ea. and run at 110 psi. A six bolt pattern is the most universal and cost effective option in my opinion. With a couple truck/trailer combinations it is important for me to have interchangeable wheels and tires for all rigs. The next priority in my arsenal is the springs and shackles supporting the vehicles. When ever possible I upgrade to the heaviest I can find. When you hear about a vehicle squatting, I would be concerned with the tires giving out first followed by the springs. Last is the axle weight. I run 7,000 pd. triple axles on my trailers.

    A set up like this is not the most comfortable to drive when not loaded. They tend to exaggerate every little crack or dip in the road. I would appreciate if others would share their opinions and insights about hauling large loads.

  32. The Following 2 Users say Thank You for This Post by Patriot76:


  33. #57
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    I have been working on repairs, non ferrous, and doing research while recovering from surgery. Went to the auction listed above, more to learn than anything else. During good times I am to busy moving metal to do any research on machinery, much less purchase it. Most profits are saved for bad times when I can take my time and invest to maximize profits. The skid steer I have still gets the job done and meets my needs, but I decided to invest in a 2016 Cat 262d with 170 hrs. The cheapest one found on the internet was several thousands more than I paid and the average was about $ 13,000 more. In this demented mind, I made a lot of money in one day. In essence, I doubled down during a soft market.


  34. The Following 8 Users say Thank You for This Post by Patriot76:


  35. #58
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    That's what comes from experience foresight and some money in the bank. Thanks for sharing. 73, Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  36. The Following 3 Users say Thank You for This Post by miked:


  37. #59
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This morning provided another example of doubling down during soft times, the value of SMF, and the importance reputation has on a business. I made a deal with the community landfill to haul their metal. The deal revolves around the land/lease agreement, they pay for Freon removal and deal with all environmental issues, and I haul at my convenience. Many curb co shop loading individual appliances, spending money driving around looking for metal, and hauling mixed loads. I can store, sort as needed, and use machinery to load. I can wait until I have a full trailer of just water heaters, or prepared, or air conditioners etc. before hauling. A separate agreement was made on electronics and air conditioners as these will be broken down. A key to the facility will be provided so I am not dependent on the hours they are open. For perspective, an out of state company use to come in once a year with a baler and haul four to six semi loads out. One of many reasons they were eager to sign on was the Freon issue and the fact I insisted a certified technician sign off on the removal. I learned about this through the forum (thank you to Kzscrapper, Freon Joe, and many others) and am tempted to take the class offered here.

    Many of you know that I have only dabbled and experimented with ewaste and plan to make a deal with a member of the forum that will increase their business/income and provide a profit for myself and the local government. Overall this is a win/win for all involved.

    Thank you to those that read my posts. My intent is to share what I am doing, hopefully to help others and solicit ideas on how to improve my operation. Any and all input is appreciated.

  38. The Following 12 Users say Thank You for This Post by Patriot76:


  39. #60
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Always look forward to hear about what's going on in the "Sticks".

  40. The Following User Says Thank You to KzScrapper for This Post:



  41. Similar threads on the Scrap Metal Forum

    1. How many RAM sticks to a lb?
      By RevenantDusk in forum A Day in the Life of a Scrapper
      Replies: 11
      Last Post: 01-14-2016, 05:41 AM
    2. blank ram sticks
      By ejh162 in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 18
      Last Post: 12-10-2015, 11:02 PM
    3. testing RAM sticks?
      By ilyaz in forum More than Scrap Value
      Replies: 3
      Last Post: 12-20-2012, 10:18 PM
    4. South Dakota | For Sale - DDR2 1gb sticks
      By pcscrapper in forum Scrappers Classifieds
      Replies: 0
      Last Post: 10-14-2012, 07:00 PM

Page 3 of 4 FirstFirst 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook