Results 1 to 20 of 20

desktop scrap worth only $5 once parted?

| A Day in the Life of a Scrapper
  1. #1
    justinm001 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2017
    Posts
    15
    Thanks
    0
    Thanked 2 Times in 1 Post

    desktop scrap worth only $5 once parted?

    I run a computer company and get tons of desktops and servers. We tore apart 40 P4 desktops and our calculations ended up with only about $240 or so plus the cases. Below is the local pricing (columbus OH) we found with weights once we tore apart. I was expecting around $10 a desktop but i guess not. Does this sound pretty normal? I figured we'll do much better with servers and networking.

    P4 motherboards 55lbs*$1.85 =$55
    Memory 2.5lbs*$15.50=$38.75
    Floppy 9oz*.12=$1
    P4 no pins 1*$4.60=$4.60
    P4 w/ pins 13oz*$6.30=$4.70
    CD Boards 4.25lbs*$3.15=$12.60
    copper/alum heatsinks 18.5lbs*$.80=$14.60
    alum heatsinks 14lbs*$.40=$5.70
    CD drives 53.5lbs*$.12=$6.40
    power supplies w/o wires 133.5lbs*$.21=$28.09
    PS wires 12.25lbs*$2=$24.50
    misc wires 3.5lbs*$.55=$1.90


    Also have IDE cables 8lbs
    power supply tips and other tips. 5lbs


  2. #2
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    What were you basing your $10 a piece on...?

  3. #3
    justinm001 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2017
    Posts
    15
    Thanks
    0
    Thanked 2 Times in 1 Post
    Educated guess based on people here buying desktops for $4-$5 each and other research. We buy a ton of computers to sell and everything but focus on servers and networking.

  4. #4
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    I think if you check the e-waste buyers here on the forum, the prices you quoted are generally in line. I wouldn't buy a desktop to scrap at $4-5 a piece but I know how people get all huffy if you only offer $2-3 for their "perfectly good" computer. Personally, I prefer not to pay anything for them, I'm actually doing them a service by saving their gas money from taking it down to the city drop-off location. Somehow that doesn't click in their heads either.

  5. The Following 2 Users say Thank You for This Post by DakotaRog:


  6. #5
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,065 Times in 650 Posts
    Your prices are a little off...probably by more than you want to believe they are...and it makes the price seem worse. Although I think you should get around 40 bucks for the steel...P4 generation is the gen of least recovery as its in between old larger socketed boards and newer reusable material.
    WI ITAD LLC, IT Liquidation Services, we remarket, buy and sell scrap electronics No customer too large or small!

  7. The Following 4 Users say Thank You for This Post by armygreywolf:


  8. #6
    SMF Badges of Honor


    Member since
    Jun 2016
    Location
    Crowley louisiana
    Posts
    131
    Thanks
    30
    Thanked 134 Times in 60 Posts
    You cheated yourself on the motherboards, unless I missed something. 55lbs of motherboards at 1.85$ = 55$. Shouldn't it be 101.75$

  9. The Following 5 Users say Thank You for This Post by manjelle:


  10. #7
    justinm001 started this thread.
    SMF Badges of Honor


    Member since
    Jan 2017
    Posts
    15
    Thanks
    0
    Thanked 2 Times in 1 Post
    Local scrap buys $.25 a pound for complete PC's, assuming average tower is 10lbs we'd get $2.50 each (100 total). It took about 4 hours or so to break down the 40 pc's which means we make $250 scrap - $100 complete) $37.50 per hour if pc's are free. We still have our time to pickup and dropoff to scrap. We're going to dropoff tomorrow and compare to see if we get what we measured.

    We have about 50-100 more desktops, 100-200 servers, and racks of cisco gear. hopefully we'll be able to make more hourly on the enterprise gear.

  11. #8
    RLS0812's Avatar
    SMF Badges of Honor

    Member since
    Feb 2014
    Location
    Bucks County Pennsylvania
    Posts
    895
    Thanks
    155
    Thanked 633 Times in 358 Posts
    Motherboards, peripheral boards, RAM, hard drive boards, CPU chip, and disc/cd/dvd drive board.



    The first random green motherboard I grabbed from my pile weighed 2.6 lbs ... which is about $4.16 scrap value ( give or take ). It seems like $2.50 is a very low price. Maybe I just grabbed an older heavy board.
    Edit: I grabbed another green one from the pile: it weighs 1.5 lbs, making it worth about $2.40 ( give or take ) .
    Last edited by RLS0812; 12-11-2017 at 11:12 PM.

  12. #9
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    689
    Thanks
    713
    Thanked 746 Times in 356 Posts
    Quote Originally Posted by DakotaRog View Post
    I think if you check the e-waste buyers here on the forum, the prices you quoted are generally in line. I wouldn't buy a desktop to scrap at $4-5 a piece but I know how people get all huffy if you only offer $2-3 for their "perfectly good" computer. Personally, I prefer not to pay anything for them, I'm actually doing them a service by saving their gas money from taking it down to the city drop-off location. Somehow that doesn't click in their heads either.
    exactly!
    ive has some irritating ppl complain to me that they cant give me their old computers for free bcos they paid X for it 10 years ago & its still working fine.
    its difficult to get the idiots to understand that what they paid $300 for 10 years ago is only worth around $5-7max to me now & if i factor in fuel & paying them for it, im wasting my time.

  13. #10
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by justinm001 View Post
    I run a computer company and get tons of desktops and servers. We tore apart 40 P4 desktops and our calculations ended up with only about $240 or so plus the cases. Below is the local pricing (columbus OH) we found with weights once we tore apart. I was expecting around $10 a desktop but i guess not. Does this sound pretty normal? I figured we'll do much better with servers and networking.

    P4 motherboards 55lbs*$1.85 =$55
    Memory 2.5lbs*$15.50=$38.75
    Floppy 9oz*.12=$1
    P4 no pins 1*$4.60=$4.60
    P4 w/ pins 13oz*$6.30=$4.70
    CD Boards 4.25lbs*$3.15=$12.60
    copper/alum heatsinks 18.5lbs*$.80=$14.60
    alum heatsinks 14lbs*$.40=$5.70
    CD drives 53.5lbs*$.12=$6.40
    power supplies w/o wires 133.5lbs*$.21=$28.09
    PS wires 12.25lbs*$2=$24.50
    misc wires 3.5lbs*$.55=$1.90


    Also have IDE cables 8lbs
    power supply tips and other tips. 5lbs
    Looks closer to $6.50 to me. The real money is in more than scrap value. Probably not going to find much of that in P4 machines.
    I would like to know where you are getting $2 per pound for power supply wire? Are you cutting the ends off?

  14. #11
    nutpie's Avatar
    SMF Badges of Honor


    Member since
    Feb 2014
    Location
    maine
    Posts
    441
    Thanks
    379
    Thanked 404 Times in 227 Posts
    Quote Originally Posted by msmoorad View Post
    exactly!
    ive has some irritating ppl complain to me that they cant give me their old computers for free bcos they paid X for it 10 years ago & its still working fine.
    its difficult to get the idiots to understand that what they paid $300 for 10 years ago is only worth around $5-7max to me now & if i factor in fuel & paying them for it, im wasting my time.
    It happens sometimes. You have to explain to some folks the useful life of their computers has ended. Don't be a dink about it, leave your phone number, they may come to their senses, they may not.

  15. The Following User Says Thank You to nutpie for This Post:


  16. #12
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,359
    Thanks
    798
    Thanked 1,281 Times in 726 Posts
    It's a tossup on the CD/DVD drives. I break mine down because there isn't a buyer for whole units in this area. It's usually a pretty quick thing. Four small screws and they pop right apart.

    I take it that CD boards = finger cards ? You do see more with the p-4's and earlier. Usually at least one and sometimes three.

    HDD's weren't listed. The HDD logic boards are easy to pop off and have scrap value.

    Do you have regular employees that you have to pay ? Best to figure the cost of having them on the job as hourly rate + workman's comp + benefits +your social security contribution on their behalf.

    Consider wear & tear on the vehicles. IRS allows something like .40 - .50 cents per mile as the real cost of running a car or truck ? It's probably not too far off the mark.

    Additional labor & costs besides the breakdown:

    Many of the towers are pretty dusty inside. Makes a mess of the shop so there's daily cleanup time to figure in.

    Cost of trash bags and trips to the dump. Towers are pretty recyclable but there's a certain amount of plastic waste on the sides and face of the machine. Do you have to pay any disposal or dumpster fees ?

    As you said earlier : Labor and travel expense of running to the scrapyard.

    There's a fair amount of time & labor involved with shipping the boards out to a buyer if you're sending things out in 69 lb packages. You have to get solid cardboard boxes and packing materials. Shipping costs are a BIG spoiler.

    Shipping things out by pallet is a lot more cost effective if you've got the volume. Still ... there's the cost of a pallet and cardboard gaylord to consider.

    Every situation is different. I'm in a rural area and my average net profit after expense is about 1.10 /lb on every box that is shipped. ( That doesn't include labor.) If i paid a couple of bucks per tower i would probably be losing money.

    The thing that makes it worthwhile is the occasional better than scrap option.

  17. #13
    CapitalRecovery's Avatar
    SMF Badges of Honor

    Member since
    Aug 2015
    Location
    United States
    Posts
    318
    Thanks
    232
    Thanked 256 Times in 134 Posts
    Hey Hill
    What if you stacked the boxes on a pallet and shrink wrapping or metal strapping them. You can get free pallets and free boxes. When the pallet is about 500lbs 7 or 8 boxes, call Gorven to come pick it up. That's only if you have room for the pallet.

  18. The Following 2 Users say Thank You for This Post by CapitalRecovery:


  19. #14
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,359
    Thanks
    798
    Thanked 1,281 Times in 726 Posts
    It's a good thought but we just don't have the population density in this rural area.Not getting enough volume to do pallets. Truth be told .... i'm only seeing about a third of the volume that i did a few years ago. When copper & steel prices dropped everybody went for e-waste and now nobody is making anything with it because it's so watered down.

    It was bound to die anyway. The trend has been from towers to laptops ... from laptops to tablets .... from tablets to i phones. With each step smaller there's less and less value to recover in scrapping.

    ~ Just the changing nature of the world around us. ~

  20. #15
    Ecycle Atlanta's Avatar
    SMF Badges of Honor

    Member since
    Apr 2011
    Location
    Outside Atlanta
    Posts
    734
    Thanks
    291
    Thanked 692 Times in 326 Posts
    Back when I used to pay for computers I told a guy I would pay him $4 per unit (some still had a few good parts) and come get them. He said it wasnt worth it and was taking them to the dump. Go figure...

  21. #16
    SMF Badges of Honor

    Member since
    Jul 2011
    Posts
    961
    Thanks
    609
    Thanked 1,399 Times in 431 Posts
    Quote Originally Posted by justinm001 View Post
    I run a computer company and get tons of desktops and servers. We tore apart 40 P4 desktops and our calculations ended up with only about $240 or so plus the cases. Below is the local pricing (columbus OH) we found with weights once we tore apart. I was expecting around $10 a desktop but i guess not. Does this sound pretty normal? I figured we'll do much better with servers and networking.

    P4 motherboards 55lbs*$1.85 =$55
    Memory 2.5lbs*$15.50=$38.75
    Floppy 9oz*.12=$1
    P4 no pins 1*$4.60=$4.60
    P4 w/ pins 13oz*$6.30=$4.70
    CD Boards 4.25lbs*$3.15=$12.60
    copper/alum heatsinks 18.5lbs*$.80=$14.60
    alum heatsinks 14lbs*$.40=$5.70
    CD drives 53.5lbs*$.12=$6.40
    power supplies w/o wires 133.5lbs*$.21=$28.09
    PS wires 12.25lbs*$2=$24.50
    misc wires 3.5lbs*$.55=$1.90


    Also have IDE cables 8lbs
    power supply tips and other tips. 5lbs
    My presumption is this would only be reasonable work for you as filler work.
    If you are in the scrap business, you have to be in the scrap business to make a consistent, relatively (to other industries) low margin. Honestly, it is the way the business functions.
    Specializing in Maximum value for mixed precious metal printed circuit boards and electronics

    Check out our pricing and read some of our RAVING reviews: http://www.scrapmetalforum.com/scrap...tal-scrap.html
    QUESTIONS? Email us: info@CashForComputerScrap.com
    or Chat with us: www.CashForComputerScrap.com

  22. The Following User Says Thank You to Ewasted for This Post:


  23. #17
    aph's Avatar
    SMF Badges of Honor

    Member since
    Jun 2015
    Posts
    118
    Thanks
    76
    Thanked 119 Times in 51 Posts
    Excuse my french, but if their computer works so effen fine, why are they trying to get rid of it?

    I do a LOT of appliances and the stupidity is beyond reason.
    You won't believe how often I am told the fridge actually works, just doesn't get cold.
    Time is Money - Crunch the Numbers - It's a Numbers Game!

  24. The Following 2 Users say Thank You for This Post by aph:


  25. #18
    Breakage's Avatar
    SMF Badges of Honor

    Member since
    Aug 2016
    Posts
    297
    Thanks
    242
    Thanked 273 Times in 149 Posts
    Quote Originally Posted by aph View Post
    Excuse my french, but if their computer works so effen fine, why are they trying to get rid of it?

    I do a LOT of appliances and the stupidity is beyond reason.
    You won't believe how often I am told the fridge actually works, just doesn't get cold.
    Oh man! Or, "The TV works fine, it just don't show the picture." Like, how do you define "works?"

  26. The Following 2 Users say Thank You for This Post by Breakage:


  27. #19
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    Youngstown, OH
    Posts
    606
    Thanks
    6
    Thanked 282 Times in 193 Posts
    Works just means the power light glows , or a fan spins, or something makes a noise to some people. My favorite thing to see is people selling something broken that just needs an "easy fix" but they don't have the time to do it so it is your gain. People will tell you anything so that you either buy their junk or come haul it away for free.

    Multi processor servers have heavy boards so you will do better with those.

  28. #20
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,359
    Thanks
    798
    Thanked 1,281 Times in 726 Posts
    If i were to guess i would think that 80-90 percent of the p-4's and newer towers are either working or can be repaired without too much trouble. The thing that people don't get is that they are too far behind the times and just can't keep up on the information superhighway. The company that i work for was still using some win 98 based machines up until a few years ago.

    Anyway ... it's useless to try and buy a machine that they think still has value. Sometimes it has to sit in storage for five or ten years before they're finally ready to let it go.

  29. The Following 2 Users say Thank You for This Post by hills:



  30. Similar threads on the Scrap Metal Forum

    1. Tennesee - Buyer of whole desktop computers and Electronic Scrap
      By mikeinreco in forum Scrap Buyers & Sellers
      Replies: 92
      Last Post: 02-16-2023, 05:32 AM
    2. This thead is a question - Dell P4 desktop scrap
      By Medani in forum Introduce yourself
      Replies: 13
      Last Post: 06-25-2014, 11:55 PM
    3. Saturn parted out
      By andrew1990 in forum Vehicle Recycling
      Replies: 0
      Last Post: 02-24-2014, 09:12 PM
    4. Replies: 9
      Last Post: 04-05-2013, 09:42 PM
    5. Do U no what HP servers are worth parted out?
      By MetalEarthRecycling in forum General Electronics Recycling
      Replies: 11
      Last Post: 08-31-2012, 09:35 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook