Page 7 of 14 FirstFirst ... 56789 ... LastLast
Results 121 to 140 of 267

A Scrapper's Dream - Page 7

| A Day in the Life of a Scrapper
  1. #121
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    possibly mismatched lug to wheel size, I've heard a good bump can shear the studs in such a case



    on the same note, possibly loose lugs that allowed it to achieve too much play
    Last edited by Bear; 02-22-2014 at 08:54 PM.

  2. The Following 2 Users say Thank You for This Post by Bear:



  3. #122
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by Patriot76 View Post
    In two weeks, 3,000 miles have been put on my butt crossing the midwest. 30 miles from Omaha a strange thing happened. Going 70 mph hauling a 30 ft. gooseneck loaded with a skid steer and all the attachments owned, a crack was heard. Looked back to see a wheel and tire from the trailer in turbo speed flying across the interstate. It seems the wheel broke all the lugs from the wheel assembly and decided to pursue it's own uncharted path. Limped into Omaha, unloaded skid steer and trailer and went to relax. I have no idea what happened, but since no one was hurt I am feeling much better now. If anyone knows what causes this, I would love to know. Otherwise it was a freak event in scrapping that will reveal itself someday.
    I had that happen on a one ton dually with sander loaded with two tons of sand/salt that I'd just had new tires put on. About 20 miles later one of the duals on the driver side went across the road. Over $800 in repairs later....

    Mechanic told me it was likely from not torquing the lugs and most likely had been too tight. The (national) shop got out of the warranty because I hadn't gone back within 20 miles to have the tires "re-torqued".
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  4. The Following 2 Users say Thank You for This Post by Mick:


  5. #123
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This is a picture of the west side of the power plant. The following pictures will show how the metal will be removed from the power plant from this perspective.


  6. The Following 6 Users say Thank You for This Post by Patriot76:


  7. #124
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This is the ramp that was built to allow access to the bottom level of the building and the staging area for extracting the metal from the building with a excavator.


  8. The Following 5 Users say Thank You for This Post by Patriot76:


  9. #125
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    That doesn't look like much of an opening haha ; ) but, it does look like one hek of a foundation. That ramp could be utilized for future deliveries etc, long as security was under control. Is the river side of the building close enough to the bank to warrant any concerns over years of bank erosion or water damage to the substructure? What shows of it here looks like a very well made foundation.
    I like those old glass block lights. Also those weep holes did their job well too. That's a great looking building there.
    I thumbed through those past projects once and that old livestock sales building really stood out. They did some fine work up there Patriot

  10. The Following 3 Users say Thank You for This Post by Bear:


  11. #126
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Nebraska
    Posts
    511
    Thanks
    521
    Thanked 809 Times in 309 Posts
    Only too recently I became schooled on the availability of torque sticks to monitor wheel nut torque. We all know what under-tightened wheel nuts produce. Same with overtight. I've also lost wheel, tire AND hub when a spindle broke. Scared the heck out of a herd of cattle one day as the wheel went bouncing through the pasture. I need to invest in one or two of these or at least use a torque wrench.

    Torque Stick

  12. The Following 4 Users say Thank You for This Post by Yunkman:


  13. #127
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Quote Originally Posted by Bear View Post
    That doesn't look like much of an opening haha ; ) but, it does look like one hek of a foundation. That ramp could be utilized for future deliveries etc, long as security was under control. Is the river side of the building close enough to the bank to warrant any concerns over years of bank erosion or water damage to the substructure? What shows of it here looks like a very well made foundation.
    I like those old glass block lights. Also those weep holes did their job well too. That's a great looking building there.
    I thumbed through those past projects once and that old livestock sales building really stood out. They did some fine work up there Patriot
    A larger opening will be made this week that will eventually be the entrance ramp to the basement parking. The Burlington Northern railroad tracks sit between the river and this building so if any problems exist, it will affect them before us.

  14. The Following 2 Users say Thank You for This Post by Patriot76:


  15. #128
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Quote Originally Posted by Yunkman View Post
    Only too recently I became schooled on the availability of torque sticks to monitor wheel nut torque. We all know what under-tightened wheel nuts produce. Same with overtight. I've also lost wheel, tire AND hub when a spindle broke. Scared the heck out of a herd of cattle one day as the wheel went bouncing through the pasture. I need to invest in one or two of these or at least use a torque wrench.

    Torque Stick
    Thank you Yunkman. I think I will be investing in a few when I return to my farm scrapping. Until then a new computer will be the next investment.

  16. The Following 2 Users say Thank You for This Post by Patriot76:


  17. #129
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    I was wondering where my pictures were.

    Only 2? Stop slacking Patriot! I need my picture fix.

    Keep up the good job, I'm enjoying following the threads. I want to know where your hiding the coolers...you did bring one right? Mine is there in spirit!

    Sirscrapalot - Entertained, Keep'm coming.

  18. The Following 3 Users say Thank You for This Post by Sirscrapalot:


  19. #130
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Met the captain of the Omaha Bomb Squad today. They will be blasting several holes in the building in the basement to allow us to move metal below ground level. Good PR, cheap labor, and creating a great network.

    Also met a fellow scrapper that has been doing it for 28 years. Very knowledgeable and created more contacts for this challenge. Also have a great burner on the crew that will provide another opportunity to learn. More information will be provided about these resources as time goes by. We are training several other individuals to become burners and so far, so good. Today the crew numbered nine individuals. We hope to have 20 within two weeks.

  20. The Following 4 Users say Thank You for This Post by Patriot76:


  21. #131
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    Quote Originally Posted by Sirscrapalot View Post
    I was wondering where my pictures were.

    Only 2? Stop slacking Patriot! I need my picture fix.

    Keep up the good job, I'm enjoying following the threads. I want to know where your hiding the coolers...you did bring one right? Mine is there in spirit!

    Sirscrapalot - Entertained, Keep'm coming.
    Problems with the computer prevent speedy communications. The coolers are used to keep the contents from freezing. We keep them outside because it is only zero degrees outside and much colder inside with the concrete and brick.

  22. The Following 2 Users say Thank You for This Post by Patriot76:


  23. #132
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    This picture is at the bottom of the ramp. It is part of the conveyor belt to move coal into the the building. The conveyor belt was covered by coal. Most of the coal was buried under ice and water that will be removed later. Coal dust is explosive and the coal is a fire hazard. More pictures will be posted later because this will be the main exit point for metal.

    Last edited by Patriot76; 03-03-2014 at 09:03 PM.

  24. The Following 5 Users say Thank You for This Post by Patriot76:


  25. #133
    jord0690's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Barrie
    Posts
    1,180
    Thanks
    27
    Thanked 716 Times in 440 Posts
    Quote Originally Posted by Mick View Post
    Quote Originally Posted by Patriot76 View Post
    In two weeks, 3,000 miles have been put on my butt crossing the midwest. 30 miles from Omaha a strange thing happened. Going 70 mph hauling a 30 ft. gooseneck loaded with a skid steer and all the attachments owned, a crack was heard. Looked back to see a wheel and tire from the trailer in turbo speed flying across the interstate. It seems the wheel broke all the lugs from the wheel assembly and decided to pursue it's own uncharted path. Limped into Omaha, unloaded skid steer and trailer and went to relax. I have no idea what happened, but since no one was hurt I am feeling much better now. If anyone knows what causes this, I would love to know. Otherwise it was a freak event in scrapping that will reveal itself someday.
    I had that happen on a one ton dually with sander loaded with two tons of sand/salt that I'd just had new tires put on. About 20 miles later one of the duals on the driver side went across the road. Over $800 in repairs later....

    Mechanic told me it was likely from not torquing the lugs and most likely had been too tight. The (national) shop got out of the warranty because I hadn't gone back within 20 miles to have the tires "re-torqued".
    Over-torquing stretches the studs, weakens them and they can snap. Seen it a bunch of times. Also, the re-torquing thing is very very very important to get done. We have had a number of people come back with loose or missing lug nuts. Most are Furious with us. Well, every time that has happened, they had put on well over the 150km limit we tell them, (and also stamp on their invoice). we asked if they had returned for the re-torque. ".....No" Id say only 20% of our customers come back for the re torque. Most say they are "too busy" to take 2 minutes to have us re torque the nuts. A father was killed here recently when a tire came off a car and flew into his windshield, and another mother and daughter are lucky to be alive after a transport lost both rear wheels on one side and one hit the hood of their car, and absolutey crushed the front end. (We got dispatched to tow the car. It was a complete wreck) Im really dissapointed that most people think that the few mins it takes to get the re torque done is less important than someones life.

    Now I know you barely even made it to the limit in your situation Mick, so im not saying you where in the wrong. Id say someone probably FORGOT to torque the lug nuts all together. We just had a cab come in after having a tranny replaced at another shop. LF wheel lug nuts where all finger tight. Imagine a tire coming off a cab on the highway with a family inside. Scary stuff.
    If I didn't have bad luck, I'd have no luck at all...

    GC Metal Recycling & Recovery
    Barrie, Ontario.

  26. The Following 4 Users say Thank You for This Post by jord0690:


  27. #134
    sawmilleng's Avatar
    SMF Badges of Honor


    Member since
    Feb 2013
    Location
    Central Kootenays, BC, Canada
    Posts
    861
    Thanks
    713
    Thanked 1,200 Times in 521 Posts
    Hopefully you have a civil engineer helping with designing the blasting--you don't want to screw up any foundations that need to stay in place! Basement walls can also serve as lateral stabilization to column foundations. You aren't always sure of this unless you have a guy that understands this kind of design.

    Please be cautious!

    Jon.

  28. The Following 2 Users say Thank You for This Post by sawmilleng:


  29. #135
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts


    This is a picture of two electric motors that will be sold separately from the rest of the scrap iron. We do not have time to scrap the copper, so I received quotes for these separate. There are over 100 of these motors in the plant, but we have not taken the time to count them. We have been offered .27 cents per pound for these by a local non-ferrous dealer. These motors can be seen in post # 132 above right above the torch sparks. In addition to these small motors the facility has numerous larger motors ranging from 25 lbs. to 2 tons.

  30. The Following 5 Users say Thank You for This Post by Patriot76:


  31. #136
    corycouch's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    jonesboro ar
    Posts
    1,405
    Thanks
    3,766
    Thanked 1,988 Times in 746 Posts
    Patriot, I absolutely love this thread. Looks like your getting a good start. IMO you can't put too many pics, I like pics. Keepem coming
    expect the worst and hope for the best
    cory couch
    c & c recycling
    JUNKERS AND CLUNKERS
    (870) 897-6484

  32. The Following 4 Users say Thank You for This Post by corycouch:


  33. #137
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    First, an apology to Sir for the lack of pictures for this post. Still to dark inside for decent pictures. The coal powered plant was remodeled into a fuel oil powered plant. That means in addition to coal fires and coal dust explosions we are now dealing with fuel in tanks and pipes. We started drilling holes in the low points to drain the combustibles but now hope to find a company that will pump the fuel for reuse. To deal with these concerns bags of baking soda, oil absorbent material, and numerous fire extinguishers are available. Each torch has it own fire extinguisher and numerous others are scattered around the building. Several retired supervisors of the plant have been brought in to identify dangerous areas as well as the Omaha Fire Department. We are looking for all resources that can help in the safety of this project.

  34. The Following 5 Users say Thank You for This Post by Patriot76:


  35. #138
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts


    The members that followed the water tank project will appreciate these two picture. These are the two fuel tanks that power the turbo generators for electricity for the city of Omaha. The one on the right will be scrapped to allow street access to our facility. We need to modify the other tank to meet new guidelines.

  36. The Following 6 Users say Thank You for This Post by Patriot76:


  37. #139
    Patriot76 started this thread.
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts


    This is the fuel tank we need to modify to meet the sales agreement. The capacity of this tank needs to be reduced to meet federal guidelines. One thought was to scrap this tank and replace it with a smaller tank. Then it was suggested that we cut a section out and re weld the tank. In a discussion with a security guard, he suggested we just pour concrete in the bottom of the tank to reduce the capacity. We went from a very expensive plan to a simple solution because a security guard offered some common sense. Lesson - keep your ears open and never underestimate the contributions of others.
    Last edited by Patriot76; 03-04-2014 at 08:03 PM.

  38. The Following 6 Users say Thank You for This Post by Patriot76:


  39. #140
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    And the solution didn't take a half-million dollar 4-year engineering degree to figure out.

  40. The Following 2 Users say Thank You for This Post by Mick:



  41. Similar threads on the Scrap Metal Forum

    1. scrapper's dictionary
      By MattInTheHat in forum Off Topic Discussions
      Replies: 19
      Last Post: 12-23-2014, 09:35 PM
    2. This thead is a question - Your Dream Find While Scrapping?
      By DJWhiteGuy in forum A Day in the Life of a Scrapper
      Replies: 12
      Last Post: 03-23-2014, 02:40 PM
    3. Dream Machine Wiring Stripping Like The Pro's
      By theelectronrecycler in forum Scrap Metal Videos
      Replies: 6
      Last Post: 10-01-2012, 11:41 AM

Page 7 of 14 FirstFirst ... 56789 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook