Page 1 of 2 12 LastLast
Results 1 to 20 of 31

Are Lower Prices Of Scrap Better Or Worse???

| A Day in the Life of a Scrapper
  1. #1
    1956 started this thread.
    1956's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Fort lauderdale FL The Venice of The USA
    Posts
    642
    Thanks
    399
    Thanked 1,276 Times in 348 Posts

    Are Lower Prices Of Scrap Better Or Worse???

    After twenty plus years in the Scrap Game I would say Lower is Better,now after your smirking stops let me give you my take,when I started #2copper was around fifty cents a pound,aluminum .20-.25 wire was .30 that's what I remember,but I also remember that people would leave there scrap / ac units in the back of there shops for me and you know what nobody touched them, almost every day when I went in to work a pile of scrap was left there in front of my door, and that was in Brooklyn New York we never paid for anything.the number of Junkers /Scrapers in my area you could count on one hand,and we all made real good money.We laughed all the way to the mattresses,no banks.I know that times are tough now and these jerks in Washington are not making it any easier on us,people have to eat and will do what ever they can to feed there family's.The lower the prices go the fewer scrapers will be out there,and the better it will be for those that remain,that's my opinion What's Yours??


  2. The Following 9 Users say Thank You for This Post by 1956:



  3. #2
    scrapping's Avatar
    SMF Badges of Honor


    Member since
    Aug 2013
    Location
    NE Ohio
    Posts
    117
    Thanks
    57
    Thanked 82 Times in 42 Posts
    Good point! When I started prices were like you speak of and very few scrappers around. A couple weeks ago I was stuck at a yard for 2 hours or so waiting for a tow truck. I probable saw 100+ people come in. And not the scrappers you would expect. A 30 something y/o soccer mom in a mini van. Teenagers on bicycles, a restaurant unloading food cans ect ect. When I started everyone knew each other by name, now guys at the yard don't even look you in the eyes. I like the prices now but I guess it's a give and take. Prices up= more scrappers and less scrap. Prices down= less scrappers more scrap. I always think about those 500lb loads of copper wishing I had them now!

  4. #3
    Scrap man's Avatar
    SMF Badges of Honor

    Member since
    Nov 2010
    Location
    NY
    Posts
    657
    Thanks
    36
    Thanked 172 Times in 93 Posts
    I think that you're right to a certain extent. I've noticed a lot less scrappers around, which has been great for me. However, there comes a point where certain things aren't worth even dealing with anymore because of low prices. For example, I can't afford to ship in my Ni-based batteries because the price is a lot lower than it was, and shipping now costs more than they're worth.

    That brings me to another point, which is the cost of everything else. Gas has been going down a bit lately, but not much. Low prices are fine if the cost of other expenses are low. However, expense prices have stayed about the same while metals prices have dropped, which means less of a profit margin. I just thought I'd point that out
    There's nothing more fun and more effective than hitting something repeatedly with a sledgehammer

  5. The Following User Says Thank You to Scrap man for This Post:


  6. #4
    jord0690's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Barrie
    Posts
    1,180
    Thanks
    27
    Thanked 716 Times in 440 Posts
    I like it when scraps up. Doesnt make a difference up here though. Prices up, lots of scrappers. Prices down, still lots of scrappers, fighting for the same scrap, tryin to make a buck. I like the higher prices. I buy cars and with scrap at what it is now, i cant offer much and people say no thanks. When scraps up, i can pay 3-400 for a car. And people seem to be ok with gettin that amount.
    If I didn't have bad luck, I'd have no luck at all...

    GC Metal Recycling & Recovery
    Barrie, Ontario.

  7. #5
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    I will take prices in the upper ranges if I can get them. I'll defend my stance:
    I will use cars as my example.
    Back in the day people used to have to PAY to have cars hauled off because they were just not worth anything to anyone to be worth the hassle- except junk yards and pull-a-part type places.

    So say we go back to the days of steel being at $80/ton. Let us assume that at that ton rate.. every scrapper in my geographical area says "Forget it" and sells off their trailer. I decide to stay in because it may just keep my plate so full I can't keep up. I may get cars for FREE now, but I may still have to pay say $50-$100 for a car instead of $200-$300.

    So I get a 3000 lb vehicle- take it to the yard and get $200 total on the body- I pay $50 for it- I profit $150
    If ferrous and core prices also take a dive because of this pricing drop I will throw out some imaginary numbers:
    Cat- Was $100.. now worth $25
    Alternator was $6.96.. now worth $1
    Copper wiring harness- was worth $1/lb.. now worth .30/lb (20 Lbs) $20 vs $6
    AC Pump- was worth $5 bucks- now worth .90 cents
    Rims- Were once worth $65.. now worth $25 bucks (I still have to pay $12 to have a set of 4 dismounted because that won't change) so I'd make $13 profit

    So all total on this example I make $196 profit.
    At current prices paying say $200 for the car.. I'd clear:
    $100 Profit on the body
    And Over $300 profit total.

    I have to value my time.. my time is $ and to take say 6 hours to pull and clean wire from a car at $1/hour would make it not worth my time. A lot of things on the vehicle would no longer be worth the time to pull. I'd probably pull the battery, cut the cat and haul the rest in virtually untouched. I would have more scrap than I knew what to do with if everyone bailed out, but the amount of time and effort It would take to make the same amount of $ I make now- by working twice as long and twice as hard- seems like a fools errand, I would most likely just venture into different business areas that would prove to be worthy of my time.

    Lets not forget that if every guy with a trailer hung it up around here- If I'd pay $50 for a car- a junkyard or a pull-a-part place would still pay $100, they can sit on vehicles for months or years and let them get picked over like a rotting carcass in the desert. I cannot compete with them now and I couldn't if prices took a dive into the hole. I spoke with a guy last night on a van.. guy said "Pull-A-Part offered me $580 for this van" I told him I can't compete with them, I just have to find people who don't get their pitch.. I can't beat them at auctions, I can't beat them with the General Public.. I just move onto the next one.
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!

  8. The Following 6 Users say Thank You for This Post by sledge:


  9. #6
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    I agree completely. When scrap was at 80 ton, back when I first started, it seemed like I kept a lot more in my back pocket because my inputs were so much less. Eighty dollars a ton seemed better when gas was 2 sumten versus 150/Ton and 3.50 gas. Tires have went plumb dam outrageous, a 10 ply 16" tire that used to sell for around 120 is now 200 plus, oil is almost 4 bucks a qt for almost any brand of oil, and going to the parts store almost requires robbing a bank before.
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  10. The Following 5 Users say Thank You for This Post by taterjuice:


  11. #7
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    I used to buy a hot beef sandwitch for .45, a coke or a candy bar or an icecream cone for a nickle too. just sayin.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  12. The Following 3 Users say Thank You for This Post by EcoSafe:


  13. #8
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Quote Originally Posted by olddude View Post
    I used to buy a hot beef sandwitch for .45, a coke or a candy bar or an icecream cone for a nickle too. just sayin.
    And like me guess, when I was your age billy, bread was a nickel. Lol !

  14. #9
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    Just remember when you were paying .50 for a sandwhich, an .5 for bread...

    In 1950 a new house cost $8,450.00 and by 1959 was $12,400.00 More House Prices
    In 1950 the average income per year was $3,210.00 and by 1959 was $5,010.00
    In 1950 a gallon of gas was 18 cents and by 1959 was 25 cents
    In 1950 the average cost of new car was $1,510.00 and by 1959 was $2,200.00 More Cars and Car Prices

    I used the 50's cause..well..just seemed a good time frame. lol.

    Anyhow..I have no thoughts on this at this moment, but keep posting ya'lls cause it's interesting seeing others take on this question.
    Good thread 1956.

    Edit to add : Here's the link to the site I pulled that info off of, if anyone else is interested in that kind of thing.

    What Happened in the 1950s featuring News, Popular Culture, Prices and Technology

    Sirscrapalot - Can't remember when bread was a nickle but remembers when gas was a buck, smokes were 2, an you could get a 6 pack for less then 7 bucks.
    Last edited by Sirscrapalot; 10-06-2013 at 10:38 PM.

  15. The Following 4 Users say Thank You for This Post by Sirscrapalot:


  16. #10
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Sirscrapalot - Can't remember when bread was a nickle but remembers when gas was a buck, smokes were 2, an you could get a 6 pack for less then 7 bucks.
    The gas station I worked in when I was in my early teens (pumping gas,yes) the price was .29 a gal. We pumped it, washed windows, checked oil all for .29 a gal.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  17. The Following 5 Users say Thank You for This Post by Mechanic688:


  18. #11
    jord0690's Avatar
    SMF Badges of Honor


    Member since
    Sep 2012
    Location
    Barrie
    Posts
    1,180
    Thanks
    27
    Thanked 716 Times in 440 Posts
    Quote Originally Posted by Mechanic688 View Post
    Sirscrapalot - Can't remember when bread was a nickle but remembers when gas was a buck, smokes were 2, an you could get a 6 pack for less then 7 bucks.
    The gas station I worked in when I was in my early teens (pumping gas,yes) the price was .29 a gal. We pumped it, washed windows, checked oil all for .29 a gal.
    My grandfather owned the last Texaco in canada, my dad worked there in the early 70s. The record for most gas in a vehicle in the history of the station, was 12 bucks... He set the record, and everyone at the station that day was circled around the pump watching. (so the story goes) Those where the days by the sounds of it.

  19. The Following 4 Users say Thank You for This Post by jord0690:


  20. #12
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Quote Originally Posted by jord0690 View Post
    My grandfather owned the last Texaco in canada, my dad worked there in the early 70s. The record for most gas in a vehicle in the history of the station, was 12 bucks... He set the record, and everyone at the station that day was circled around the pump watching. (so the story goes) Those where the days by the sounds of it.
    I also remember working that same time frame - eight hour day got $22.80 ($2.85/hr). So, where are we, really:

    1971 - minimum wage $2.85 & gallon of gas $0.32 or you could buy 8.9 gallons of gas for one hour minimum wage.
    2013 - federal minimum wage $7.25 & gallon of gas $3.45 or 2.1 gallons of gas for one hour @ minimum wage.

    So, the US dollar is worth less than a fourth of what it was 42 years ago. So, in answer to the original question, I'd have to agree that lower prices for scrap metal are "better" under the premise that lower prices for scrap would also coincide with lower prices in general and stronger buying power for the dollar. A further result would be a stronger world economy (anyone for macro-economics?). However, I'm not ready to cash in my hoard in the hopes that'll lower scrap metal prices and save the world.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  21. The Following 6 Users say Thank You for This Post by Mick:


  22. #13
    1956 started this thread.
    1956's Avatar
    SMF Badges of Honor

    Member since
    Jul 2012
    Location
    Fort lauderdale FL The Venice of The USA
    Posts
    642
    Thanks
    399
    Thanked 1,276 Times in 348 Posts
    I wanted to repost this tread, what comes around goes around.

  23. #14
    numbers's Avatar
    SMF Badges of Honor

    Member since
    Nov 2011
    Location
    Kansas
    Posts
    167
    Thanks
    1,421
    Thanked 312 Times in 115 Posts
    I do think that as prices drop for ewaste that this will flush out some of the people and leave more for those of us that are really serious about it.

  24. The Following User Says Thank You to numbers for This Post:


  25. #15
    Patriot76's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    Buffalo Commons
    Posts
    2,949
    Thanks
    10,589
    Thanked 7,220 Times in 2,256 Posts
    When scrap prices are down, it is time to stock pile and do maintenance on equipment. The longer they are down, the less competition and the better prepared a person will be when they rebound. So if you have the room to store metal, the ability to finance down times, and the desire to take advantage of investing in scrap, lower prices mean money in the long run.

  26. The Following 4 Users say Thank You for This Post by Patriot76:


  27. #16
    armygreywolf's Avatar
    SMF Badges of Honor



    Member since
    Dec 2013
    Location
    Germantown, WI
    Posts
    1,084
    Thanks
    193
    Thanked 2,065 Times in 650 Posts

    Are Lower Prices Of Scrap Better Or Worse???

    well said patriot. Ive been storing ram carbide nickel and cell phone boards since september...carbide alot longer. Its a better investment than anything else.

    Heck Ive only been on this rock for 31 years but in 2000 I remember short iron at 75 a ton and sheet at 60. However the first time I put gas in a car I owned was october 1998 and I remember the price... 97 cents. Copper pipe was about a buck and a quarter then too.

    My point....this is not relative the fact is for relevance wed need short iron at about 300 to make up for inflation...the dollar is the worst investment in recent history having lost 98.5 percent of its value since .

    short term low is great long term low is bad just the same for high....
    WI ITAD LLC, IT Liquidation Services, we remarket, buy and sell scrap electronics No customer too large or small!

  28. #17
    DakotaRog's Avatar
    SMF Badges of Honor



    Member since
    Aug 2014
    Posts
    1,611
    Thanks
    602
    Thanked 1,675 Times in 830 Posts
    I think its a mixed bag. People who dabble in scrapping to make some extra cash and/or as hobby (such as myself) would more easily quit if the higher prices weren't there. For full-timers, my impression (and maybe wrong) is that's its not only the money but its also the freedom of being your own boss and/or being able chart your own destiny (as much as one can nowadays in North America). Sooner or later if prices crap out and that's your main income, then, yeah re-evaluation of how to use your time to the best ability would have to get factored in.

    Another point that's been brought up is the increased cost of living between now and "then". And indeed, except maybe in steel as Sledge as pointed out, scrap had more purchasing power then than now. I've shown these inflation calculators before (found another one this morning). A 1980 dollar (when I was in high school) would need $3 now for the same purchasing power. I put in what I made on #2 Cu the last time I took it in ($2.30 a pound) and went back to 1980 and it was worth 76 cents which is what I remember going down to the non-ferrous guy with Al cans and seeing 80 cents for copper (my memory about the year may not be exact but probably close enough).

    Then again. maybe not. I just ran 80 cents in 1980 and it equals (according to this calculator) $2.43 now. If its right, then slightly more purchasing power than in 1980...

    DollarTimes.com | Inflation Calculator

  29. The Following 3 Users say Thank You for This Post by DakotaRog:


  30. #18
    msmoorad's Avatar
    SMF Badges of Honor


    Member since
    Apr 2013
    Location
    Durban, South Africa
    Posts
    689
    Thanks
    713
    Thanked 746 Times in 356 Posts
    im probably gonna sound stupid but i think that just to get rid of the looong queues and insane amount of time it takes to drop off a load and get paid,
    it would be better to have slightly lower prices

    time is money
    but if youre wasting over an hour for something that should take 20 mins max-forget it.
    id rather have a quick n easy visit to the scrapyard & earn a bit less instead of putting up with lots of obnoxious ppl just to get a little bit more

    a frustrating visit to the yard can mess up my mood BIG time

  31. The Following 3 Users say Thank You for This Post by msmoorad:


  32. #19
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by msmoorad View Post
    im probably gonna sound stupid but i think that just to get rid of the looong queues and insane amount of time it takes to drop off a load and get paid,
    it would be better to have slightly lower prices

    time is money
    but if youre wasting over an hour for something that should take 20 mins max-forget it.
    id rather have a quick n easy visit to the scrapyard & earn a bit less instead of putting up with lots of obnoxious ppl just to get a little bit more

    a frustrating visit to the yard can mess up my mood BIG time
    Happiness to me is an empty truck scale when you pull in the gate.

  33. The Following 4 Users say Thank You for This Post by Mechanic688:


  34. #20
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Quote Originally Posted by Mechanic688 View Post
    Happiness to me is an empty truck scale when you pull in the gate.
    Agreed I went and sold a little copper and was the only one at the yard............I just buy and sell I am not a hoarder of anything except $100 bills they take up alot less space

  35. The Following User Says Thank You to mikeinreco for This Post:



  36. Similar threads on the Scrap Metal Forum

    1. This thead is a question - lower-grade e-scrap buyers in the DC Metro area?
      By ilyaz in forum General Electronics Recycling
      Replies: 1
      Last Post: 05-09-2013, 09:51 PM
    2. Lower than Low-Grade?
      By MeyeLastRide in forum Low-Grade Electronics Recycling
      Replies: 8
      Last Post: 12-09-2012, 01:10 PM
    3. Lower Ferrous Prices Keeping Competitors at Bay...
      By JunkmanDan in forum A Day in the Life of a Scrapper
      Replies: 8
      Last Post: 10-15-2012, 11:12 PM
    4. Hello from L.A. (Lower Alabama)
      By Sambocus in forum Introduce yourself
      Replies: 1
      Last Post: 05-22-2012, 04:23 PM
    5. Lower Del scrapper
      By torchedmonkee in forum Introduce yourself
      Replies: 0
      Last Post: 11-01-2010, 12:26 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook