Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Kind of feel bad...

| A Day in the Life of a Scrapper
  1. #1
    Caveman started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Minnesota
    Posts
    128
    Thanks
    43
    Thanked 165 Times in 52 Posts

    Kind of feel bad...

    Picked up a free push mower about a mile from home last night. Talked to the guy in his driveway, and he just said it wouldn't start. He asked me what I would do with it, "try to fix it, but I'm not very good at that. So it will likely get scrapped." When I got home I gave it a pull and it seem locked up. What a shame I thought, here is a very nice Toro GTS 6.5 HP 22" rear drive personal pace with bagger that someone didn't put enough oil in. It was late so I didn't do any tinkering. This morning I was prepared to rip the motor off the deck and get things ready for the yard. First thing though I flipped up the lid that covers the grass chute, so that it mulches and doesn't shoot the grass out the side. On the back edge of the chute was a stick perfectly wedged in place to stop the mowing blade. Pull the stick out, shut the lid, and the mower ran like a champ. Nicest push mower I've ever owned, kinda feel bad but I know the guy had a brand new mower in his garage already anyways.


  2. The Following 11 Users say Thank You for This Post by Caveman:



  3. #2
    SMF Badges of Honor


    Member since
    Jun 2013
    Location
    Toledo, Ohio
    Posts
    550
    Thanks
    551
    Thanked 323 Times in 200 Posts
    Don't worry about it I once found a snowblower without a primer, put a screw in it and used starting fluid to start it and it ran for 4 seasons.

  4. The Following User Says Thank You to scrapping4ever for This Post:


  5. #3
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Indianapolis
    Posts
    190
    Thanks
    227
    Thanked 206 Times in 76 Posts
    If you want to ease your soul....drop back by with a $20 bill for. him. Tell him you got it going, and would love for him to call you if he hears about any junk equipment, metal, or electronics.

    Could be the best $20 you ever dropped.....in any case you still got a hell of a deal.

  6. The Following 15 Users say Thank You for This Post by Enoch43:


  7. #4
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Minneapolis
    Posts
    593
    Thanks
    324
    Thanked 324 Times in 171 Posts
    Too bad he already bought another one..i wouldve tried selling it back to him lol...

    Either way, u made a buck or several due to ur knowledge that others do not have...you shouldnt feel bad that you take the time to look something over thoroughly before tossing it..someone else considered it worthless and you made a profit...

    Thats the way the ball rolls..i say, Nice Job!!!

  8. The Following 3 Users say Thank You for This Post by scrappy888:


  9. #5
    Caveman started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Minnesota
    Posts
    128
    Thanks
    43
    Thanked 165 Times in 52 Posts
    Quote Originally Posted by Enoch43 View Post
    If you want to ease your soul....drop back by with a $20 bill for. him. Tell him you got it going, and would love for him to call you if he hears about any junk equipment, metal, or electronics.

    Could be the best $20 you ever dropped.....in any case you still got a hell of a deal.
    This thought did cross my mind. The wallet doesn't have $20 in it at this time. Maybe after a run to the yard tomorrow. Still won't tell him what it took to fix it. I'll have to make up some story of pulling the carb off, replacing gaskets, polishing rusted spots, replacing the plug, and adjusting the linkages.

  10. The Following User Says Thank You to Caveman for This Post:


  11. #6
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    Could just say you sold it off for more then scrap to a fella that repairs them, etc. Either way, I think your doing right by him to drop him a couple bucks. Others may disagree but it'll make him happy an gain you some nice karma in the bank. He'll also remember you an tell his friends about you hopefully.

    Nothing means more then a man/woman's rep/word.

    Sirscrapalot - Sometimes doing the right thing means giving up a bit of profit. - Me..far as I know

  12. The Following 5 Users say Thank You for This Post by Sirscrapalot:


  13. #7
    SMF Badges of Honor


    Member since
    Aug 2011
    Location
    Indianapolis
    Posts
    190
    Thanks
    227
    Thanked 206 Times in 76 Posts
    No shame in that game, my friend. No need to make up stories, just say that a half hour with a beer and a fluff and buff and she started right up. The future is the story, not the past. The cash you press into his hand bought the past.

  14. The Following 3 Users say Thank You for This Post by Enoch43:


  15. #8
    NHscrapman's Avatar
    SMF Badges of Honor


    Member since
    Jan 2013
    Location
    new hampshire
    Posts
    1,582
    Thanks
    4,076
    Thanked 2,176 Times in 941 Posts
    i'm with sirscrapsalot here give him a few bucks when you have it and be known as the honest scrapper. I received a chainsaw that was "broken" which meant he pulled the pull start apart and the spring came out he didn't have the patience to put it back together. I did, sold it as a used chainsaw, after a couple of cords of wood that needed to be bucked, and returned $20 to him. Have picked up a few loads from the same guy over the years and he ALWAYS remembers that saw and guess who he calls to pick up his stuff.
    Last edited by NHscrapman; 07-23-2013 at 06:26 AM.
    There ain't nothing wrong with an honest days work. Anyone who says otherwise is a fool.- Old Man

  16. The Following 3 Users say Thank You for This Post by NHscrapman:


  17. #9
    hobo finds's Avatar
    SMF Badges of Honor


    Member since
    Nov 2010
    Location
    tucson, az
    Posts
    4,746
    Thanks
    6,035
    Thanked 5,906 Times in 2,555 Posts
    No! He could have looked and found the stick, but he chose to buy a new one, and to give you his old one!

  18. The Following User Says Thank You to hobo finds for This Post:


  19. #10
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    I had an apartment on the lower level of a little old lady's home in Nashville, and noticed two mowers out by the road. She said the mower guy was supposed to haul them off, but if they sat there another week I could have the one I'd asked about, a Craftsman with a B&S 4HP push mower. She said her son had hit a tree root sticking up, and it sounded like the engine was flying apart, but it looked great on the outside, so after a week I grabbed it. I was doing some work at a country club there, and asked a guy in their shop if he'd give it a look. He said it was likely a sheer key on the blade, which was exactly what it turned out to be, and for $5 it ran like new again. By this time I'd already moved and it stayed in storage unneeded until I moved to a more country type place (where I had to mow my own grass ; ). I did pure bush hogging with that thing for about 10 years there.
    You got a lot better deal than I did, but I kinda know the feeling
    Good luck with it man
    Last edited by Bear; 07-23-2013 at 05:54 PM.

  20. The Following User Says Thank You to Bear for This Post:


  21. #11
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    I've never bought a mower. Nor anyone I know has had to buy a mower, unless they wanted to. Don't feel bad some just need a tweek here or there.

  22. The Following User Says Thank You to Russell for This Post:


  23. #12
    ginofrater's Avatar
    SMF Badges of Honor


    Member since
    May 2013
    Location
    Canada
    Posts
    506
    Thanks
    921
    Thanked 254 Times in 160 Posts
    He should pay you ,for your removal services!
    Last edited by ginofrater; 07-23-2013 at 09:17 PM.

  24. The Following User Says Thank You to ginofrater for This Post:


  25. #13
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Reminds me of when I once bought this old lawn runner a john dear from my neighber for $20 . He never could get it started ???
    This was about 5 years ago and I was not even scrapping yet but I knew that was a good deal
    I put fuel into it , new batteries and it started perfect hydrostatic trans works fine also
    I felt bad also from his confused look when he saw me using it. But thats being in the right place at the right time .

  26. #14
    happyscraper's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    spring hill,fl
    Posts
    2,864
    Thanks
    350
    Thanked 1,371 Times in 847 Posts
    You say you feel bad for fixing something that was given to you, and you think lying about it will make you feel better???

  27. #15
    Caveman started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Minnesota
    Posts
    128
    Thanks
    43
    Thanked 165 Times in 52 Posts
    Quote Originally Posted by happyscraper View Post
    You say you feel bad for fixing something that was given to you, and you think lying about it will make you feel better???

    Not about me, me, me. I wish to thank the guy, teach the guy, without totally pissing the guy off. How abouts I say, "I changed the gas, changed the oil, changed the plug, cleaned out the carb, adjusted the safety shut-off linkage and there was no change. It was then that I noticed the stick wedged in the deck. Removed it and it runs fine. It's a heck of a mower let me give you $20 as a thank-you for it."

    He gets taught what fixed it, I get to offer him $20 as thanks, and hopefully he sees that we all overlook simple things once in a while.

    Or I could try, "Hey dumby, there was just a little stick stuck in the deck holding the blade from turning. Let me give you $20 bucks for that $370 mower you just gave me."

    ....

    I decided to give it a little time before going back and thanking him. I've used the mower for all of 10 minutes and it could have some other defects hiding that I don't know about. If the mower lasts awhile I'll stop by and thank him then.

  28. The Following 2 Users say Thank You for This Post by Caveman:


  29. #16
    MelRay's Avatar
    SMF Badges of Honor



    Member since
    Jan 2012
    Location
    Wilton Iowa
    Posts
    34
    Thanks
    295
    Thanked 74 Times in 14 Posts
    Why is it so many reply with a few words about how a member can lie about what happens instead of telling the truth.
    I like the idea of offering to pay a few bucks for it, and hoping he will give you future business. like Sirscrapalot says.... Nothing means more then a man/woman's rep/word.

  30. The Following User Says Thank You to MelRay for This Post:


  31. #17
    SMF Badges of Honor


    Member since
    Jun 2013
    Location
    Toledo, Ohio
    Posts
    550
    Thanks
    551
    Thanked 323 Times in 200 Posts
    Quote Originally Posted by Bear View Post
    I had an apartment on the lower level of a little old lady's home in Nashville, and noticed two mowers out by the road. She said the mower guy was supposed to haul them off, but if they sat there another week I could have the one I'd asked about, a Craftsman with a B&S 4HP push mower. She said her son had hit a tree root sticking up, and it sounded like the engine was flying apart, but it looked great on the outside, so after a week I grabbed it. I was doing some work at a country club there, and asked a guy in their shop if he'd give it a look. He said it was likely a sheer key on the blade, which was exactly what it turned out to be, and for $5 it ran like new again. By this time I'd already moved and it stayed in storage unneeded until I moved to a more country type place (where I had to mow my own grass ; ). I did pure bush hogging with that thing for about 10 years there.
    You got a lot better deal than I did, but I kinda know the feeling
    Good luck with it man
    One time I found a brand new lawn mower and I mean like they took it out of box and threw it away. It had this weird shaking so I thought it was the key. Nope either at the factory or the dumb people put the spacers on the blade wrong and it bent the shaft. ):

  32. The Following User Says Thank You to scrapping4ever for This Post:


  33. #18
    99problems's Avatar
    SMF Badges of Honor


    Member since
    Jul 2013
    Location
    Atlanta
    Posts
    72
    Thanks
    6
    Thanked 17 Times in 9 Posts
    Quote Originally Posted by Caveman View Post
    Picked up a free push mower about a mile from home last night. Talked to the guy in his driveway, and he just said it wouldn't start. He asked me what I would do with it, "try to fix it, but I'm not very good at that. So it will likely get scrapped." When I got home I gave it a pull and it seem locked up. What a shame I thought, here is a very nice Toro GTS 6.5 HP 22" rear drive personal pace with bagger that someone didn't put enough oil in. It was late so I didn't do any tinkering. This morning I was prepared to rip the motor off the deck and get things ready for the yard. First thing though I flipped up the lid that covers the grass chute, so that it mulches and doesn't shoot the grass out the side. On the back edge of the chute was a stick perfectly wedged in place to stop the mowing blade. Pull the stick out, shut the lid, and the mower ran like a champ. Nicest push mower I've ever owned, kinda feel bad but I know the guy had a brand new mower in his garage already anyways.

    dont feel bad, its life. I once had a mechanic who i took my car to do an an oil change, try to charge me $11 labor to REPLACE (not for the part) an air filter . Only reason i was gonna have it done, was because i didnt want to make another stop that day. NEEDLESS TO SAY i ended up stopping, buying and installing myself

  34. #19
    Curbside shopper's Avatar
    SMF Badges of Honor

    Member since
    Aug 2011
    Location
    Pa
    Posts
    317
    Thanks
    171
    Thanked 289 Times in 152 Posts
    I wouldn't even mention the stick. Might make him feel stupid and he might not call you again.

    Just some tinkering and some time and you got it up and running, slip him a $20 and your card and thank him.

  35. #20
    Caveman started this thread.
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    Minnesota
    Posts
    128
    Thanks
    43
    Thanked 165 Times in 52 Posts
    UPDATE!

    Well it turns out the mower was an oil leaker. Slowly a puddle formed in my garage. It appeared someone over-tightened the oil drain as the block was cracked there, even missing a little chunk. I ripped the motor off the chassis, and tried to put another good running motor on it, but things didn't line up.

    The chassis sat in the backyard for the summer. It was just too nice to scrap. This week I found a similar mower, or near identical. But this one was beat up. The tires were wobbly, the handles bent, the plastic motor cover broken, dirty black oil, and......a recently frayed cable running to the safety switch on the motor. Pulled that motor off and had it on the old chassis in no time. Didn't even have to put gas in it. Probably should have changed the oil, but I only ran it for a minute.

    So, not really a day in the life of a Scrapper, but rather a couple days, or a Scrapper Summer.

  36. The Following 6 Users say Thank You for This Post by Caveman:



  37. Similar threads on the Scrap Metal Forum

    1. I feel better!
      By hobo finds in forum Off Topic Discussions
      Replies: 0
      Last Post: 06-19-2013, 05:48 PM
    2. Ah man did I feel bad for the guy in front of me
      By newattitude in forum A Day in the Life of a Scrapper
      Replies: 9
      Last Post: 01-27-2013, 09:00 PM
    3. I feel bad, please comfort me, lol
      By andrew1990 in forum General Electronics Recycling
      Replies: 2
      Last Post: 11-08-2012, 01:42 AM
    4. I feel so dang old now
      By KC-SF in forum A Day in the Life of a Scrapper
      Replies: 6
      Last Post: 10-13-2011, 08:49 PM
    5. This is how i feel today
      By Filthy in forum Off Topic Discussions
      Replies: 3
      Last Post: 09-26-2011, 05:21 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook