Page 1 of 2 12 LastLast
Results 1 to 20 of 39

deciding on a truck

| A Day in the Life of a Scrapper
  1. #1
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts

    deciding on a truck

    So with me trying to expand a little and since I like pick ups I am looking for a truck that will haul what I need it to and get at least ok mileage. I know I have hundreds of options so I wanted to see what you guys are using and maybe get some tips on what to look for. First and most important I want something that will last a while and won't need a ton of work as in stuff going bad. I also want a 4x4 because of where I live and what i would be doing with it but here comes my indecision, should I get a 1/2 ton or 3/4 ton? I don't think I would need a 1 ton but what do you guys think? will 1/2 get the job done? I plan on an 8ft bed so I can get bigger loads and I want something that will pull good which is why I'm leaning toward a 3/4, I just use my brother 1/2 to haul about 1200lbs and it was sagging more then I would have liked it too.



  2. #2
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    http://www.scrapmetalforum.com/tools...our-truck.html

    Might give you an idea of what others are using already.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  3. The Following User Says Thank You to Mechanic688 for This Post:


  4. #3
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    I did look through that and it didn't really help, I guess I should say what is a good truck to start with that I will be able to throw anything at

  5. The Following User Says Thank You to bigdog72 for This Post:


  6. #4
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    Also I didn't mention,I have an 84 bronco. Has anyone used one of these? If so how well did it do, I'm still fixing mined up right now

  7. #5
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    BigDog, what kind of scrapping will you be focusing on at first?

  8. #6
    Phantoms001's Avatar
    SMF Badges of Honor



    Member since
    Mar 2012
    Location
    Indiana
    Posts
    556
    Thanks
    167
    Thanked 529 Times in 243 Posts
    When you get to bigger trucks that can haul more, you get into bigger engines and bad gas mileage. I don't know how you are going to get around that. It just takes more power to move a heavier truck.

    I also think most of the newer trucks are being built better and better. If you do some basic maintenance I would expect any truck to last 200k. Change the oil, transmission fluid, coolant, brake fluid, like you are suppose to and you would be surprised how long vehicles last.

  9. The Following 2 Users say Thank You for This Post by Phantoms001:


  10. #7
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    russell, I am just getting into the driving around looking for stuff and putting my name out phase, my hopes are to get some regulars and maybe start picking up cars and bigger items like that

    Phantoms001: right now I am looking at trucks around 1997 and up the trouble is finding one I can afford that I dont have to dump money into, I am handy around cars as that is the career I would like to go into my main problem is funds

  11. #8
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    If you're just curb shopping, Id recommend a 4 cylinder pick up. I cant see making money with worse gas mileage while curb siding. Id parlay whatever you can make through your trash finds into a small cheap trailer something small and light that a small truck can pull, when you have dedicated stops/ regular customers. maybe a 4x8-5x10 flatbed with a 2k gvwr.

  12. #9
    Phantoms001's Avatar
    SMF Badges of Honor



    Member since
    Mar 2012
    Location
    Indiana
    Posts
    556
    Thanks
    167
    Thanked 529 Times in 243 Posts
    Quote Originally Posted by bigdog72 View Post
    russell, I am just getting into the driving around looking for stuff and putting my name out phase, my hopes are to get some regulars and maybe start picking up cars and bigger items like that

    Phantoms001: right now I am looking at trucks around 1997 and up the trouble is finding one I can afford that I dont have to dump money into, I am handy around cars as that is the career I would like to go into my main problem is funds
    GovDeals.. always an option. If you know your way around a truck you can do okay on CL if you are patient. Trucks do hold their value. I totally understand about the money thing. I am driving a 1995 dakota I picked up for 500.00 off of CL and it has been running for over a year. The only problem I've had was it needed a new starter this winter, 220k.

  13. The Following User Says Thank You to Phantoms001 for This Post:


  14. #10
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    I've been on CL for quite some time haha, I am kind of partial to like a ranger or dakota or something like that and I have my bronco for the heavier stuff but idk I dont think something that small would suit me well. I'm driving my brothers ram 1500 now and really like it I get about 11 mpg, not too crazy about that but it could be worse

  15. #11
    SMF Badges of Honor




    Member since
    Mar 2012
    Location
    ks
    Posts
    2,187
    Thanks
    2,513
    Thanked 2,140 Times in 898 Posts
    Unless you get a 4 cycl 5 speed pickup, not very many of the mini pickups have very good fuel mileage. To me it's a wash, if you go for mileage you got a pita manual and aren't able to tow much, or go with a v6, or larger, with an auto and fuel mileage isn't great and your not able to tow as much as a full sized pickup.
    Alvord iron and salvage
    3rd generation scrapper and dam proud of it

  16. #12
    Phantoms001's Avatar
    SMF Badges of Honor



    Member since
    Mar 2012
    Location
    Indiana
    Posts
    556
    Thanks
    167
    Thanked 529 Times in 243 Posts
    Quote Originally Posted by bigdog72 View Post
    I've been on CL for quite some time haha, I am kind of partial to like a ranger or dakota or something like that and I have my bronco for the heavier stuff but idk I dont think something that small would suit me well. I'm driving my brothers ram 1500 now and really like it I get about 11 mpg, not too crazy about that but it could be worse
    That must have a 5.9 in it to get 11mpg, what a gas hog. At 3.50 a gallon that is a big expense. I think they may have put a 3.6 in some full size Dodges. I personally wouldn't want a truck with an engine larger than 5.0 unless it's a diesel because of the gas costs.

  17. #13
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    It is a 5.9 but I like the power it has.

    taterjuice: I was just doing some research and thinking the same thing, I guess my next question is, is there a big difference in mileage between 1/2 tons and 3/4 tons?

  18. #14
    Libertytow's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    Silverton NJ
    Posts
    562
    Thanks
    64
    Thanked 340 Times in 180 Posts
    nope not much if any at all

    that being said i can never go back to half ton once you move up it"s hard to roll backward
    Liberty Towing & Recycling
    (732)279-8599
    Cleaning up NJ 1 LB at a time!
    Certified Mobile Scales
    Fully Insured Carrier usdot # 1802487
    WWW.LibertyTowing.Webs.Com
    WWW.TRRecycles.Webs.com

  19. #15
    Libertytow's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    Silverton NJ
    Posts
    562
    Thanks
    64
    Thanked 340 Times in 180 Posts
    big dog if your are looking into moving cars a 2500 series should be a minimum requirement the forces on a half ton will a wear it out alot quicker and b it"s not how you get the load going but when you need to STOP you

    'll appreciate the stiffer frame and upgraded braking

  20. #16
    ryanw's Avatar
    SMF Badges of Honor


    Member since
    Oct 2012
    Location
    TX
    Posts
    1,312
    Thanks
    526
    Thanked 1,290 Times in 648 Posts
    I don't want to hijack this thread, but this is related to the topic very closely. What is the deal with payload ratings, or more specifically the naming of 1/2, 3/4, 1 ton trucks? I have a relatively small pickup - 2004 tacoma. It's rated for a 1500lb payload. Does that make it a 3/4 ton truck? Very confusing.

  21. #17
    Phantoms001's Avatar
    SMF Badges of Honor



    Member since
    Mar 2012
    Location
    Indiana
    Posts
    556
    Thanks
    167
    Thanked 529 Times in 243 Posts
    Quote Originally Posted by ryanw View Post
    I don't want to hijack this thread, but this is related to the topic very closely. What is the deal with payload ratings, or more specifically the naming of 1/2, 3/4, 1 ton trucks? I have a relatively small pickup - 2004 tacoma. It's rated for a 1500lb payload. Does that make it a 3/4 ton truck? Very confusing.
    The main difference between the different ratings is the suspension, axle, gears, frame, and breaks.

    It's all about the weight that they can haul.

    150/1500 = 1/2 ton
    250/2500 = 3/4 ton
    350/3500 = 1 ton

    The towing abilities are covered by the GCWR (Gross Combined Weight Restricted) that is the maximum the truck, trailer, payload, fuel and passengers can weigh together. This number is greatly influenced by individual configuration. Maximum tow ratings are decided by the individual configuration of the truck and subtracting the weight of the vehicle from the GCWR.

    In general:

    150/1500 has a GCWR of 13,000-15,000 pounds and a tow rating of 6,000-10,000 pounds.

    250/2500 has a GCWR of 19,000-20,900 pounds and a tow rating of 12,500-14,000 pounds.

    350/3500 has a GCWR of 21,000-29,000 pounds and a tow rating of 14,000-17,500 pounds.

    While your truck can MAX OUT at 1500 pounds, a true 1500 can haul much more, it can also tow more. I've had 2000 pounds in my little Dakota and made it around just fine but it felt like I was on a boat swaying side to side around turns.
    Last edited by Phantoms001; 04-03-2013 at 07:47 PM.

  22. The Following 3 Users say Thank You for This Post by Phantoms001:


  23. #18
    bigdog72 started this thread.
    bigdog72's Avatar
    SMF Badges of Honor


    Member since
    Dec 2012
    Location
    honey brook PA
    Posts
    274
    Thanks
    14
    Thanked 137 Times in 68 Posts
    Thanks everyone this has helped a lot, now I get to search more on CL till I find something decent I can afford haha

  24. #19
    Russell's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Chicago,Il
    Posts
    815
    Thanks
    495
    Thanked 707 Times in 324 Posts
    Bigdog for what its worth. I used an s10 for mainly curb shopping, it gets around 18 mpg. Most times I can make money with that kind of mileage. I also have a 250 to tow a 16 ft trailer for larger loads. I loose my butt if I try to curbshop with the 250. Its only getting around 10 mpg. Use the right tool for the right job. whatever direction you choose to go.

  25. The Following User Says Thank You to Russell for This Post:


  26. #20
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Mile HIGH
    Posts
    195
    Thanks
    469
    Thanked 100 Times in 54 Posts
    1979 - 1996 ford f150 or f250 straight six motor ..... indestructible ... engine ... and good fuel mileage with a 4 speed or 5 speed stick ... i just sold my 1985 f150 like a month ago ... thing could pull a house and still get like 12 mpg ... empty with no trailer i averaged like 20 per gallon free way driving was a lil less cause i had a carb leak at high speeds but city driving that truck did everything i asked ....
    Last edited by scrapGAME; 04-03-2013 at 08:50 PM.


  27. Similar threads on the Scrap Metal Forum

    1. I don't have a truck :/
      By HeartSpasms in forum Tools and Equipment
      Replies: 35
      Last Post: 08-21-2013, 10:29 PM
    2. New truck
      By easyrecycle in forum Tools and Equipment
      Replies: 26
      Last Post: 06-04-2013, 11:03 PM
    3. Truck down again
      By CAPTSCRAPER in forum Scrap Metal Videos
      Replies: 13
      Last Post: 01-12-2013, 09:12 PM
    4. What do you think of this truck??
      By easyrecycle in forum Tools and Equipment
      Replies: 14
      Last Post: 03-06-2012, 02:52 PM
    5. I might be getting a truck of my own!
      By CanIScrapIt in forum A Day in the Life of a Scrapper
      Replies: 25
      Last Post: 01-18-2012, 03:38 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook