Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Shred

| A Day in the Life of a Scrapper
  1. #1
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts

    Shred

    I was watching a video of the yard I frequent and they have a shredder so you can see the stuff that i always see in the mountain pile turned into the the pile of shred . So what become of this stuff, is it sold as is & if so , is there assays performed with the shred to make sure the content stays within parameters .



  2. #2
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    as long as there is .0017 percent copper in the railcar or truckload then its considered #2 shredd which is what the majority of mills buy. There is no assay done on it they have downstream systems to take all the copper, aluminum, stainless and trash out of it. Trust me the yard wants to recover as much non ferrous as possible. If you shredd 600 to 1000 ton of material in a day and you can recover all the material out of the fluff you can then you are maximizing your shredders potential. Scrap yards spend 100,000s of thousands of dollars just so they can recover 1 to 2 percent more of the non ferrous material out of there fluff. Why send it to the landfill when you can recover it and get paid for it. Think about what 1 to 2 percent of 600 tons is its an extra 2 grand or more of material a day.

  3. The Following 5 Users say Thank You for This Post by PistoneScrapProcessing:


  4. #3
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I process as much as possible........I always wondered what happens when the yard tells me to throw my low grade boards in with shred....How do they process that?

  5. #4
    jghilino's Avatar
    SMF Badges of Honor

    Buying Specialty Escrap of all kinds, resale grade computer parts

    Member since
    Sep 2012
    Location
    KANSAS CITY
    Posts
    2,672
    Thanks
    1,429
    Thanked 1,453 Times in 919 Posts
    yea i bet the shredder dosent separate out transformers and electric motors as they are ferrous

  6. #5
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    Quote Originally Posted by jghilino View Post
    yea i bet the shredder dosent separate out transformers and electric motors as they are ferrous
    They probably use a Eddie-current system to separate out the non-ferrous.

  7. #6
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    So there are 2 ways shred is worked sold as is , or sold with some non ferris removed by the very yard that shreds .What I have seen is smaller yards if they can pull copper wire by hand they will but the yard with shredder lets it ride. Some times I'll see some really nice copper items but they seem to want it in the mix for shred the .0017 percent copper must be.
    Last edited by Copper Head; 10-23-2012 at 08:28 AM.

  8. #7
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Well I know that copper makes steel weak so why would they want any copper or is just a little required?

  9. #8
    Jonniebrass's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Massachusetts
    Posts
    1,007
    Thanks
    582
    Thanked 496 Times in 296 Posts
    Here it gets shredded. And loaded directly into rail cars and moves on to somewhere. They buy steel here as either light iron or heavy iron the stuff in the rail car is shredded heavy.

  10. #9
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Quote Originally Posted by mikeinreco View Post
    Well I know that copper makes steel weak so why would they want any copper or is just a little required?
    From what PistoneScrapProcessing said " as long as the schred mix has .0017 percent copper in the railcar or truckload then its considered #2 shredd " They don't mix ( melt) copper with steel it is separated . The .0017 percent copper just makes the load a better gamble for the purchase .
    Like in my small fry situations - some one has metal to sell me so i see steel and all the stuff you can imagine and i have to figure a price well more times then not a higher value metal is there ( Copper - Al - Brass - wire ) once I see that i can gauge my price on those items as there the sure thing . The other metals can become free to purchase as people are often more then happy with the money i can offer on the sure thing naturally I don't explain the way I figure it . Any way thats a good rule to follow Always base your price on the sure thing item
    Last edited by Copper Head; 10-23-2012 at 12:17 PM.

  11. #10
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    The shredder does separate transformers and electric motors. I can't tell you there specific grade off hand but I have always heard of them referred to as meatballs or something similar to that. They just look like smashed up motors that you would never ever be able to get the windings out of. Heck I am not even sure how they do it after its gone through the shredder. I have also seen gaylords of shredded boards that were picked out of the fluff. Like I said its almost 99.99 percent ferrous material when its shipped out if its not the yard is throwing away money it could recover. Name me one scrap yard owner who has a shredder and doesn't have a decent or great downsteam recovery system for there non-ferrous and fluff. I have even heard of yards running the fluff twice through the downstream to see if they can recover more non-ferrous out of it before they send it to the trash dump or incinerator. Remember this used to all be done by hand back in the day if you have been doing this for a long time and have ever worked around a shredder you can remember the old dog houses they had built and there would 20 guys in there picking through the fluff as it came out of the shredder. That is all done by x-rays and specialized magnets and drums now.

  12. The Following 3 Users say Thank You for This Post by PistoneScrapProcessing:


  13. #11
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    NC
    Posts
    8
    Thanks
    0
    Thanked 7 Times in 5 Posts
    You are correct about the meatballs when referring to motors and transformers. Once the shred goes through, the fluff goes one way and all the ferrous goes the other way. Often times red metals and meatballs get through with the ferrous metals. The shredders I have been to have a line of guys hand picking through the ferrous to get as much red metals and meatballs out of it before it goes to the mills. Then they run their fluff through the downstream sorting to get all the non-ferrous out to maximize profits. They have x-rays and eddy currents and other high tech stuff to get the non-ferrous out. It is all automated and sorted to go into their respective piles. This is just what I have seen a the 3 shredders I have been through.

  14. The Following 2 Users say Thank You for This Post by Climber34:


  15. #12
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Kewl

  16. #13
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    Meatball Separation:

  17. The Following 2 Users say Thank You for This Post by Gravitar:


  18. #14
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    copper melts just slightly over 1,900 degrees F
    steel melts at around 2500°F
    it would seem the way to get copper off the meat balls -
    Melt it off at 600 degrees lower then steel
    Last edited by Copper Head; 10-23-2012 at 10:09 PM.

  19. #15
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by Gravitar View Post
    They probably use a Eddie-current system to separate out the non-ferrous.
    As far as I know an eddie current system is only good for the aluminum part of the material.
    We buy electronic scrap, Gold Karat scrap, gold filled, refined gold, silver and many other item's.

  20. #16
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by Copper Head View Post
    copper melts just slightly over 1,900 degrees F
    steel melts at around 2500°F
    it would seem the way to get copper off the meat balls -
    Melt it off at 600 degrees lower then steel
    Sorry but it will not work that way. When you combine the metals and start melting them the melting points change and the metals combine into one if they can.

  21. #17
    Copper Head started this thread.
    Copper Head's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Up North
    Posts
    1,883
    Thanks
    579
    Thanked 1,014 Times in 516 Posts
    Quote Originally Posted by BarrenRealms007 View Post
    Sorry but it will not work that way. When you combine the metals and start melting them the melting points change and the metals combine into one if they can.
    But if steel melts at around 2500°F that means at 1900 steel is still inert & the copper becomes liquid
    unless there are other facts ??

  22. #18
    Gravitar's Avatar
    SMF Badges of Honor



    Member since
    Jul 2012
    Location
    Central Texas
    Posts
    1,086
    Thanks
    1,258
    Thanked 1,431 Times in 525 Posts
    Quote Originally Posted by BarrenRealms007 View Post
    As far as I know an eddie current system is only good for the aluminum part of the material.
    Well, at least it may separate out aluminum motors and transformers.

  23. #19
    SMF Badges of Honor

    Member since
    May 2011
    Location
    Saint Louis, MO
    Posts
    762
    Thanks
    15
    Thanked 900 Times in 349 Posts
    To add more to what barren said a majority of the steel used in those motors and transformers is not pure steel at all. There is going to be a lot of silicone steel.

  24. #20
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    Massachusetts
    Posts
    351
    Thanks
    145
    Thanked 105 Times in 79 Posts
    Quote Originally Posted by Jonniebrass View Post
    Here it gets shredded. And loaded directly into rail cars and moves on to somewhere. They buy steel here as either light iron or heavy iron the stuff in the rail car is shredded heavy.
    When i go into everett/Chelsea, you can see the boat getting loaded. There is a huge pile of unprocessed shed, i am guessing they shred it right onto the boat.

    I know scrap it and second street iron ship out dump trailers full of unprocessed shred. Not many people have shredders in the city i think.


  25. Similar threads on the Scrap Metal Forum

    1. Are some things always shred?
      By TXf250 in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 22
      Last Post: 11-22-2012, 09:17 AM
    2. wheels, shred or more?
      By TXf250 in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 22
      Last Post: 08-24-2012, 06:18 AM
    3. alum or shred??
      By mongo in forum Scrap Metal Questions and Answers
      Replies: 9
      Last Post: 03-06-2012, 12:21 AM
    4. What goes in your shred pile?
      By jonnyjeb in forum Misc. Metal Recycling
      Replies: 29
      Last Post: 01-27-2012, 09:08 PM
    5. Denver shred price is?
      By PartTimeScrapper in forum Scrap Metal Prices
      Replies: 6
      Last Post: 12-22-2011, 12:28 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook