Results 1 to 16 of 16

Motherboard scrap prices?

| Computer Recycling
  1. #1
    Magzz63 started this thread.
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Haverhill MA
    Posts
    6
    Thanks
    6
    Thanked 0 Times in 0 Posts

    Motherboard scrap prices?

    Hiya,
    Was just looking at scrap prices at a couple of places, can anyone tell me if the prices change according to what you have done to the board?
    For instance, one site says large socket mother boards (no batteries) $2.80 lb. Small socket $1.60 etc. I am totally new to this e-scrapping!! My
    question is this: Does that price stay the same if I have depopulated the boards about 100%.



  2. #2
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Magzz63 View Post
    Hiya,
    Was just looking at scrap prices at a couple of places, can anyone tell me if the prices change according to what you have done to the board?
    For instance, one site says large socket mother boards (no batteries) $2.80 lb. Small socket $1.60 etc. I am totally new to this e-scrapping!! My
    question is this: Does that price stay the same if I have depopulated the boards about 100%.
    As long as the socket is still on the board you'll be fine. Without the socket they can't tell if it's a large or small socket...

  3. The Following User Says Thank You to 520 for This Post:


  4. #3
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Depopulating the boards will lower the price. If you're taking off chips that are permenantly attached, you've reduced the amount of PM that can be recovered

  5. The Following 4 Users say Thank You for This Post by mthomasdev:


  6. #4
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Quote Originally Posted by Magzz63 View Post
    Hiya,
    Was just looking at scrap prices at a couple of places, can anyone tell me if the prices change according to what you have done to the board?
    For instance, one site says large socket mother boards (no batteries) $2.80 lb. Small socket $1.60 etc. I am totally new to this e-scrapping!! My
    question is this: Does that price stay the same if I have depopulated the boards about 100%.
    If you mean "depopulated the boards about 100%" literally then no one will give you anything near that price, at least not if they want to stay in business. I wouldn't buy a completely stripped motherboard for higher than midgrade-low price and then only if it had visible gold trace.

  7. The Following User Says Thank You to JJinLV for This Post:


  8. #5
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    If you are new to ewaste, why are you depopulating boards??

  9. The Following 5 Users say Thank You for This Post by jimicrk:


  10. #6
    Magzz63 started this thread.
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Haverhill MA
    Posts
    6
    Thanks
    6
    Thanked 0 Times in 0 Posts
    I have a bad habit of doing thing hastily! I guess I figured if I was going to remove all the plated pins, IC's, MLCC's, Tantalums,That the rest was garbage anyway so I depopulated a few boards. This is why I came to ask before I did anymore. My scrap is adding up fast and I am over my head as far as knowledge about this stuff. I have a lot to learn for sure.
    I just found that a lot of my sound blaster audio cards are totally gold plated under the solder cover, same with a pile of synaptic cards I got from really old IBM think pads. I like collecting all the PM's and chips and stuff, like I said it's a hobby to me. So if I have the time it is better to get less for board and keep collecting the rest?

  11. #7
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Magzz63 View Post
    I have a bad habit of doing thing hastily! I guess I figured if I was going to remove all the plated pins, IC's, MLCC's, Tantalums,That the rest was garbage anyway so I depopulated a few boards. This is why I came to ask before I did anymore. My scrap is adding up fast and I am over my head as far as knowledge about this stuff. I have a lot to learn for sure.
    I just found that a lot of my sound blaster audio cards are totally gold plated under the solder cover, same with a pile of synaptic cards I got from really old IBM think pads. I like collecting all the PM's and chips and stuff, like I said it's a hobby to me. So if I have the time it is better to get less for board and keep collecting the rest?
    My last post was sarcasm. To get the most monetary value from your boards you should sell them without depopulating anything. Then if you want to collect PM take the money from selling your boards and buy some gold or silver.

    BTW what solder cover are you talking about on sound blaster cards? I have boxes of new sound blaster cards.
    Last edited by 520; 12-21-2018 at 06:33 PM.

  12. The Following User Says Thank You to 520 for This Post:


  13. #8
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Quote Originally Posted by 520 View Post
    My last post was sarcasm. To get the most monetary value from your boards you should sell them without depopulating anything. Then is you want to collect PM take the money from selling your boards and buy some gold or silver.

    BTW what solder cover are you talking about on sound blaster cards? I have boxes of new sound blaster cards.
    I think he's talking about the green solder mask.

    Solder mask or solder stop mask or solder resist is a thin lacquer-like layer of polymer that is usually applied to the copper traces of a printed circuit board for protection against oxidation and to prevent solder bridges from forming between closely spaced solder pads. Wikipedia

    Most circuit boards have copper under the solder mask but a few have gold. There are some display boards in in certain phones I scrap that have the gold under the solder mask which means more money.

  14. The Following 2 Users say Thank You for This Post by jimicrk:


  15. #9
    Magzz63 started this thread.
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Haverhill MA
    Posts
    6
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by jimicrk View Post
    I think he's talking about the green solder mask.

    Solder mask or solder stop mask or solder resist is a thin lacquer-like layer of polymer that is usually applied to the copper traces of a printed circuit board for protection against oxidation and to prevent solder bridges from forming between closely spaced solder pads. Wikipedia

    Most circuit boards have copper under the solder mask but a few have gold. There are some display boards in in certain phones I scrap that have the gold under the solder mask which means more money.
    Yes the solder mask, thank you Jimicrk. the sound blasters have a brown solder mask. What is your opinion Jimicrk as far as depopulating my boards? Is it worth more in the long run to someone like me that has all the time to do it? If I just sell off the boards as is it kinda kills the hobby part for me.

  16. #10
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    Quote Originally Posted by Magzz63 View Post
    Yes the solder mask, thank you Jimicrk. the sound blasters have a brown solder mask. What is your opinion Jimicrk as far as depopulating my boards? Is it worth more in the long run to someone like me that has all the time to do it? If I just sell off the boards as is it kinda kills the hobby part for me.
    My main reason for not doing it is because of the hazardous materials that are in some of the components. I don't wish to contaminate my work area or myself.
    I like 520's idea. Sell your boards and buy your gold.

  17. The Following 3 Users say Thank You for This Post by jimicrk:


  18. #11
    SMF Badges of Honor


    Member since
    Jun 2017
    Location
    Las Vegas
    Posts
    1,306
    Thanks
    3,232
    Thanked 1,922 Times in 785 Posts
    Quote Originally Posted by Magzz63 View Post
    Yes the solder mask, thank you Jimicrk. the sound blasters have a brown solder mask. What is your opinion Jimicrk as far as depopulating my boards? Is it worth more in the long run to someone like me that has all the time to do it? If I just sell off the boards as is it kinda kills the hobby part for me.
    If you can safely depopulate boards without lead or silicate contamination then for your next batch do the math according to a buyer's price list before depopulating then compare it to what you get paid in your return for depopulated boards and precious metals returns. My own recommendation for the highest and safest returns is to take all that time you'd spend depopulating boards and use it to source more e-waste.

  19. The Following User Says Thank You to JJinLV for This Post:


  20. #12
    Magzz63 started this thread.
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Haverhill MA
    Posts
    6
    Thanks
    6
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by JJinLV View Post
    If you can safely depopulate boards without lead or silicate contamination then for your next batch do the math according to a buyer's price list before depopulating then compare it to what you get paid in your return for depopulated boards and precious metals returns. My own recommendation for the highest and safest returns is to take all that time you'd spend depopulating boards and use it to source more e-waste.
    I thank you for your advice on checking with buyers price list. According to the list I was looking at and the weight of some of my scrap, I have been making almost nothing for my
    time spent. Trimmed gold fingers $25 lb, I put to much time into a pound to get back $25. I have lots of CPU'S and found the price list just confusing. I wish I had never started removing things from the scrap. I guess my next step is to learn more about the scrap and stop removing things til I know its worth it. I still have about 100 mother boards untouched, so now i need to find a local buyer.

  21. #13
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Magzz63 View Post
    I thank you for your advice on checking with buyers price list. According to the list I was looking at and the weight of some of my scrap, I have been making almost nothing for my
    time spent. Trimmed gold fingers $25 lb, I put to much time into a pound to get back $25. I have lots of CPU'S and found the price list just confusing. I wish I had never started removing things from the scrap. I guess my next step is to learn more about the scrap and stop removing things til I know its worth it. I still have about 100 mother boards untouched, so now i need to find a local buyer.
    With CPU's you should be able to just send them to the buyer and let them sort them out for you.

  22. The Following User Says Thank You to 520 for This Post:


  23. #14
    Magzz63 started this thread.
    SMF Badges of Honor

    Member since
    Nov 2018
    Location
    Haverhill MA
    Posts
    6
    Thanks
    6
    Thanked 0 Times in 0 Posts
    520, did you check your cards for gold plating? If you do have some there is a way to remove the solder mask so not to scratch the gold if you need to.

  24. #15
    SMF Badges of Honor


    Member since
    Dec 2017
    Location
    Tucson AZ
    Posts
    361
    Thanks
    306
    Thanked 579 Times in 231 Posts
    Quote Originally Posted by Magzz63 View Post
    520, did you check your cards for gold plating? If you do have some there is a way to remove the solder mask so not to scratch the gold if you need to.
    No. All my sound blaster cards are new in box. If they don't sell then i'll just scrap them for 3.50 a pound.

  25. The Following User Says Thank You to 520 for This Post:


  26. #16
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I take the battery of the board, mostly they just clip into a plastic surround attached to the board, that's the coin sized battery.
    If it's soldered to the board by metal strips, I use pliers to work it off. Don't use force or just your fingers. When that metal strip rips or breaks, it's really sharp & you can ( I did ) slice yourself on it ( badly ).

    The other battery's I often find on Apple equipment is a cylinder shaped Purple & Green Lithium battery. Some are replaceable & some are soldered onto the board.
    There's been a few other odd battery's, mostly a plastic box double side taped onto the board.
    Battery's HAVE to be removed before transport as a safety measure.

    I also any Ferrous metal off as well.
    That's the 'Tinsel' from the face of the USB etc sockets, normally it's held on by the Chrome/Nickel plated Brass hexagon screws. (It's NOT the metal sheilding surrounding sockets)
    The extra metal around the CPU socket, the lever & the top plate of pinless CPU, the metal plate on the back of the board that's used to attach the heatsink assembly to the board. Most of the time it's a 'X' shape with 4 threaded holes in it.

    Aluminium heatsinks. There's ones held on by screws, some held on by pins, or soldered on tabs crimped into the heatsink.
    And some are glued to a SMD chip on the board. I twist it first with a screwdriver or pliers & it might come off, if it's not moving, a heatgun/paint stripper aimed at it for a few seconds will soften the glue enough.to loosen it.
    Sometimes when I have tried levering them off, the chip breaks off the board.

    Any large Aluminium can capacitors that will make stacking the board's later on harder, or waste space when packing. They are worth less than the board, so taking them off increases the value of the board to the buyer anyway.

    Excess Steel may devalue the board's, find out first. The buyer will probably specify, if they don't, find out the answer. The extra weight could increase shipping costs.

    Aluminium heatsinks, again, worth less than the board. I have seen it specificed that there "should be no heatsinks". Mostly they are extruded Ali. So not that much of a loss.

    Copper heatsinks. They are worth more than the board ( by weight ). So you make extra coin by removing them. It's rare to find them though.

    That's all that I would take off the board except the CPU & memory sticks.
    Last edited by eesakiwi; 12-24-2018 at 07:34 AM.


  27. Similar threads on the Scrap Metal Forum

    1. What is the scrap value of a depopulated motherboard?
      By martyweil in forum Scrap Metal Questions and Answers
      Replies: 22
      Last Post: 09-06-2015, 04:10 PM
    2. Vintage Motherboard
      By Hurrikane in forum Scrappers Classifieds
      Replies: 4
      Last Post: 08-24-2014, 11:07 AM
    3. Motherboard Prices
      By DrJamesDaddy in forum Scrap Metal Prices
      Replies: 8
      Last Post: 06-25-2013, 03:09 PM
    4. Intel 486 SX 25 Built in to Motherboard. Anyone know scrap value
      By nypcscrapper in forum General Electronics Recycling
      Replies: 18
      Last Post: 09-29-2012, 04:16 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook