Results 1 to 18 of 18
  1. #1
    CapitalRecovery started this thread.
    CapitalRecovery's Avatar
    SMF Badges of Honor

    Member since
    Aug 2015
    Location
    United States
    Posts
    318
    Thanks
    232
    Thanked 256 Times in 134 Posts

    To pull the laptop Mother board or scrap the incomplete laptop?

    Should I pull the laptop motherboard, or should I scrap the incomplete laptop?
    I always pull the RAM, battery, and pry out the CPU (with out taking it all a part.)
    I normally pull the mother board too because of shipping cost, but has anyone crunched the numbers?



  2. #2
    jimicrk's Avatar
    SMF Badges of Honor


    Member since
    Sep 2013
    Location
    Tennessee
    Posts
    2,825
    Thanks
    2,917
    Thanked 4,838 Times in 1,877 Posts
    I get only 20 or 30 laptops in a year and I do take them apart.

  3. #3
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    I normally dismantle really non working laptops. But like most of these questions it has to fit into your situation. I am currently down on volume, voluntarily, so storing laptop motherboards is easier and takes up less room. This works for me.

    Here's my special pet name for laptops "Just one more D#!N screw". It takes a lot of effort to break down laptops and some of our buyers do have attractive prices. 73, Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  4. The Following 2 Users say Thank You for This Post by miked:


  5. #4
    sledge's Avatar
    SMF Badges of Honor


    Member since
    Nov 2012
    Location
    Central Indiana
    Posts
    2,717
    Thanks
    4,534
    Thanked 4,240 Times in 1,609 Posts
    You make FAR more if you dismantle.
    Some people hate them to tear down.
    But if you have all the right bits, a great drill etc.
    You can make a killing tearing them apart:
    RAM- Resell-able generally
    Mother Board= $
    Screen- if not gouged or cracked can net you $3 each- that's if you don't ebay them (which is far more)
    Battery- paying like $1.50/lb
    A lot of laptops are aluminum based in many parts- .30/lb
    You get a CPU fiber chip and may luck out and get a desirable chip you can resell.
    Working and decent sized hard drive has value
    The list goes on and on....
    I'm so into scrapping.. When my Steel Toe Boots Wear out, I cut the Steel out of them and recycle the Toe!

  6. The Following 5 Users say Thank You for This Post by sledge:


  7. #5
    CapitalRecovery started this thread.
    CapitalRecovery's Avatar
    SMF Badges of Honor

    Member since
    Aug 2015
    Location
    United States
    Posts
    318
    Thanks
    232
    Thanked 256 Times in 134 Posts
    Do you guys ever not find that last screw and just say to hell with this, get both gloves on and rip the laptop completely in two?
    Not screen and keyboard but top and bottom of keyboard
    Sorry, Ewasted for the broken MOB...
    Last edited by CapitalRecovery; 01-29-2017 at 04:05 PM.

  8. The Following 6 Users say Thank You for This Post by CapitalRecovery:


  9. #6
    SMF Badges of Honor

    Member since
    Mar 2015
    Posts
    6
    Thanks
    0
    Thanked 10 Times in 4 Posts
    If you get a lot of laptops it is better to sell your laptops as incomplete. You get roughly 1.00 a lb for incomplete 14.75 for the memory you pulled from the laptops 1.75 for the Lith-ion Batteries and 6.00 lb for the processors. Most laptops after you harvest some of the goodies is still 5-6 lbs = 5.00-6.00 for only a minute or two of your time to take out the goodies that are quick to get. Now we all know it takes time to break down the laptop to get the mother board and than the screen it is wasted time you could be breaking down other items that you can generate good money on.I just sold 800 lbs of incomplete laptops at 1.00 a Lb this was about 160 laptops it would have taken me a good week maybe two to break these down and harvest all parts. In one 8 hour day this is what I made 800.00 for the incomplete laptops weight @ 1.00 lb I had 95 lbs of lith-ion batteries @1.75 lb = 166.25 8lbs memory @ 14.75 Lb = 118.00 totaling 1084.25 Now I saved myself a week or two of time that I broke down even more ewaste.. This is just my opion on what works for me! Good luck at what ever you decide! Forgot to add it was only 119.22 for my freight shipping
    Last edited by bnawa38; 02-02-2017 at 09:32 PM.

  10. The Following 5 Users say Thank You for This Post by bnawa38:


  11. #7
    lousypirate's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    Marne, MI
    Posts
    439
    Thanks
    34
    Thanked 287 Times in 138 Posts
    I never get them in volume, and end up doing what bnawa does. Not worth the time IMO. YMMV.

  12. #8
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Quote Originally Posted by bnawa38 View Post
    If you get a lot of laptops it is better to sell your laptops as incomplete. You get roughly 1.00 a lb for incomplete 14.75 for the memory you pulled from the laptops 1.75 for the Lith-ion Batteries and 6.00 lb for the processors. Most laptops after you harvest some of the goodies is still 5-6 lbs = 5.00-6.00 for only a minute or two of your time to take out the goodies that are quick to get. Now we all know it takes time to break down the laptop to get the mother board and than the screen it is wasted time you could be breaking down other items that you can generate good money on.I just sold 800 lbs of incomplete laptops at 1.00 a Lb this was about 160 laptops it would have taken me a good week maybe two to break these down and harvest all parts. In one 8 hour day this is what I made 800.00 for the incomplete laptops weight @ 1.00 lb I had 95 lbs of lith-ion batteries @1.75 lb = 166.25 8lbs memory @ 14.75 Lb = 118.00 totaling 1084.25 Now I saved myself a week or two of time that I broke down even more ewaste.. This is just my opion on what works for me! Good luck at what ever you decide! Forgot to add it was only 119.22 for my freight shipping
    If someone gifted you 800lbs of laptops CONGRATS.......Please give more insight about how you steadily acquire such a large flow of material

  13. #9
    SMF Badges of Honor

    Member since
    Jan 2013
    Location
    Kansas
    Posts
    182
    Thanks
    44
    Thanked 208 Times in 87 Posts
    Quote Originally Posted by bnawa38 View Post
    If you get a lot of laptops it is better to sell your laptops as incomplete. You get roughly 1.00 a lb for incomplete 14.75 for the memory you pulled from the laptops 1.75 for the Lith-ion Batteries and 6.00 lb for the processors. Most laptops after you harvest some of the goodies is still 5-6 lbs = 5.00-6.00 for only a minute or two of your time to take out the goodies that are quick to get. Now we all know it takes time to break down the laptop to get the mother board and than the screen it is wasted time you could be breaking down other items that you can generate good money on.I just sold 800 lbs of incomplete laptops at 1.00 a Lb this was about 160 laptops it would have taken me a good week maybe two to break these down and harvest all parts. In one 8 hour day this is what I made 800.00 for the incomplete laptops weight @ 1.00 lb I had 95 lbs of lith-ion batteries @1.75 lb = 166.25 8lbs memory @ 14.75 Lb = 118.00 totaling 1084.25 Now I saved myself a week or two of time that I broke down even more ewaste.. This is just my opion on what works for me! Good luck at what ever you decide! Forgot to add it was only 119.22 for my freight shipping
    Assuming that every stick of RAM pulled was the heaviest type(double row of chips on both sides) and further assuming that you were pulling two sticks of RAM per laptop, that only gets you 6.1 lbs of RAM. You must've had well over 200 laptops to harvest 8 lbs. of RAM.
    Also, neither of those assumptions is likely to hold up over a large number of laptops.
    Personally, I just pull the RAM, battery and HDD (due to sensitive nature of data) and then sell as complete laptop.

  14. The Following 2 Users say Thank You for This Post by Flinthills:


  15. #10
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    I've acquired probably 75 to 100 laptops, some complete, most incomplete. I'm debating how to handle them.

  16. #11
    HipoGear's Avatar
    SMF Badges of Honor


    Member since
    May 2015
    Location
    Rochester, NY
    Posts
    734
    Thanks
    2,048
    Thanked 945 Times in 409 Posts
    Quote Originally Posted by Swampy View Post
    I've acquired probably 75 to 100 laptops, some complete, most incomplete. I'm debating how to handle them.
    I would completely dismantle a couple of them and then decide what is best for you. There may be a slight $ advantage of one way over the other. But only you can determine what your time is worth.
    The fact that you can be paid for a complete laptop without leaving the RAM, HDD, and battery is a huge profit factor.

  17. The Following User Says Thank You to HipoGear for This Post:


  18. #12
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Quote Originally Posted by HipoGear View Post
    I would completely dismantle a couple of them and then decide what is best for you. There may be a slight $ advantage of one way over the other. But only you can determine what your time is worth.
    The fact that you can be paid for a complete laptop without leaving the RAM, HDD, and battery is a huge profit factor.
    I can not agree more. What's best for you is up to you. Mike

  19. #13
    Swampy's Avatar
    SMF Badges of Honor

    Member since
    Apr 2013
    Location
    North Georgia, USA
    Posts
    258
    Thanks
    543
    Thanked 223 Times in 124 Posts
    Knowing that they are still considered "complete" even with battery, hard drive, and memory pulled definitely helps with the decision.

  20. #14
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    My special pet name for laptops is unprintable here unless you like reading paragraphs like this...."#$@(*&$* laptop !@#$$#@@#! laptop! %^#*#((!!! Arrgh! Screw this I'm getting the Sledge hammer."



    I highly dislike laptops.

    Sirscrapalot - Laptops are the enemy. Destroy them all! DELETE DELETE DELETE! - I'd tell you but you wouldn't know who he was.

  21. The Following User Says Thank You to Sirscrapalot for This Post:


  22. #15
    mthomasdev's Avatar
    SMF Badges of Honor


    Member since
    Apr 2012
    Location
    pittsfield, ma
    Posts
    1,300
    Thanks
    348
    Thanked 1,532 Times in 704 Posts
    Quote Originally Posted by Swampy View Post
    Knowing that they are still considered "complete" even with battery, hard drive, and memory pulled definitely helps with the decision.
    Check with your buyer. They all vary on what is complete.

  23. The Following 3 Users say Thank You for This Post by mthomasdev:


  24. #16
    CapitalRecovery started this thread.
    CapitalRecovery's Avatar
    SMF Badges of Honor

    Member since
    Aug 2015
    Location
    United States
    Posts
    318
    Thanks
    232
    Thanked 256 Times in 134 Posts
    I was also thinking about cutting our the CPU with my Dremmel, and harvesting the easy stuff like the Bat.,RAM, Hard drive.

  25. #17
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Quote Originally Posted by CapitalRecovery View Post
    I was also thinking about cutting our the CPU with my Dremmel, and harvesting the easy stuff like the Bat.,RAM, Hard drive.
    My thought is if you are going to this much effort just break them down completely. After taking the ram, cpu, battery, hard drive why would anyone pay a premium for what is left over?

    I'm a little unsure how using a dremmel tool would make getting the cpu out quicker. With the current scrap valueof laptop cpu's its nearly not worth the effort to remove them from the motherboard.

    I'm not serious but I did just weigh up 6 0z. of laptop cpu's and it took 31 to make that weight. Math time: 6oz/16oz = 37.5% $12/lb x .375(37.5%) = $4.50/ 31 cpu's = 14.5 cents each. I'm not suggesting you don't pull them just consider the value of your time. I am a firm believer in doing it yourself and deciding what is the best course of action.

    My model will differ from yours, I choose to take what would be pennies in scrap, test it and sell it for dollars. Because of this I tend to fully break down my laptops. We all need to find our niche. 73, Mike

  26. The Following 4 Users say Thank You for This Post by miked:


  27. #18
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    Maple Ridge, BC, Canada
    Posts
    254
    Thanks
    103
    Thanked 306 Times in 125 Posts
    I only pull re-useable parts from laptops, the rest is sold as either complete or incomplete. My buyer accepts as complete without batteries or hard drives.
    Occasionally I pull one RAM (if there is two), and the batteries for scrap, as it only takes a few seconds. I get relatively a lot of laptops, get about 800-1000 pieces per year.
    Not worth my time to break any down. I like them, make good money on them both scrap and re-useable parts.


  28. Similar threads on the Scrap Metal Forum

    1. International - Buying laptop Memory, and laptop CPU
      By choijai in forum Scrap Buyers & Sellers
      Replies: 7
      Last Post: 08-21-2016, 03:50 PM
    2. scrap laptop screens
      By mthomasdev in forum General Electronics Recycling
      Replies: 4
      Last Post: 10-23-2015, 10:42 PM
    3. Laptop scrap
      By Rollyrogers33 in forum A Day in the Life of a Scrapper
      Replies: 15
      Last Post: 08-21-2014, 10:17 PM
    4. Laptop selling or scrap?
      By Ecycle Atlanta in forum Scrap Metal Questions and Answers
      Replies: 10
      Last Post: 08-15-2013, 01:07 AM
    5. Turns out the laptop i got is a vista laptop
      By TrashPickingAusKid2 in forum Off Topic Discussions
      Replies: 4
      Last Post: 06-26-2012, 11:19 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook