Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1
    Jdscrapz started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    brampton
    Posts
    50
    Thanks
    6
    Thanked 10 Times in 9 Posts

    Things to watch out for when buying bulk laptops ??

    I Have a chance to buy Dell Latitude d630 laptops x24
    for 800$ They come with chargers and with HDs i was wondering if there's any potential on ebay for older workplace laptop machines such as this the company that is selling them to me is a very big refurb/ewaste company. I know this guy knows the scrap prices better then i do considering hes a large company, He has ALOT of this stuff. Do you think there's any potential for making money off a company like this on ebay? I see lots of 10 going for 600+ USD + What should i watch out for also?



    PS they boot to atleast bios most are working

    2gigs ram duo cores


  2. #2
    AuburnEwaste's Avatar
    SMF Badges of Honor

    Member since
    Jan 2012
    Location
    Metro Detroit
    Posts
    773
    Thanks
    32
    Thanked 976 Times in 413 Posts
    D630s have overheating problems, I would be very careful with this. They seem to sell pretty good still on ebay though. Depending on what operating system they came with you might be able to to make a decent profit.

    Edit: I would be questioning why a refurb company is trying to unload them all, rather than refurbish them.

  3. The Following 2 Users say Thank You for This Post by AuburnEwaste:


  4. #3
    logansryche's Avatar
    SMF Badges of Honor


    Member since
    Sep 2014
    Location
    Jamestown, TN
    Posts
    1,215
    Thanks
    1,043
    Thanked 564 Times in 367 Posts
    I read ebay and my ears perk up lol. Yes you might be able to make some money on them or other machines you receive from them.

  5. #4
    Jdscrapz started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    brampton
    Posts
    50
    Thanks
    6
    Thanked 10 Times in 9 Posts
    Thx for info guys! This guy is more of a ewaste guy but sells some pallets as of laptop and desktop he does not break anything down

  6. The Following User Says Thank You to Jdscrapz for This Post:


  7. #5
    BRASSCATCHER's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Posts
    2,476
    Thanks
    3,436
    Thanked 3,965 Times in 1,383 Posts
    Where is he located? Whats his name? Cmon share some info, you ask enough questions and get answers. I don't think I have seen you answer anyone elses questions yet? The only time you are here is to ask a question. " sorry guys if this has been asked already but I have searched and couldn't find what I was looking for. Maybe I can sucker in someone into giving me an answer?"
    I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist

    NEWBS READ THIS THREAD ABOUT REFINING!!!!
    http://www.scrapmetalforum.com/off-t...ning-read.html

  8. The Following User Says Thank You to BRASSCATCHER for This Post:


  9. #6
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I would buy them where are they located......I'm not gun shy

  10. The Following 2 Users say Thank You for This Post by mikeinreco:


  11. #7
    travistemple202020's Avatar
    SMF Badges of Honor


    Member since
    Jul 2012
    Location
    ames iowa
    Posts
    1,326
    Thanks
    267
    Thanked 883 Times in 495 Posts
    $800 is really high $20each as is maybe but even then its high

  12. The Following User Says Thank You to travistemple202020 for This Post:


  13. #8
    Jdscrapz started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    brampton
    Posts
    50
    Thanks
    6
    Thanked 10 Times in 9 Posts
    Hmm okay thanks ill have to think carefully and decide

  14. #9
    directrecycle's Avatar
    SMF Badges of Honor

    Member since
    Oct 2011
    Posts
    520
    Thanks
    95
    Thanked 467 Times in 226 Posts

    Things to watch out for when buying bulk laptops ??

    you would make money off the screens alone

  15. #10
    Jdscrapz started this thread.
    SMF Badges of Honor

    Member since
    Feb 2015
    Location
    brampton
    Posts
    50
    Thanks
    6
    Thanked 10 Times in 9 Posts
    How so..

  16. #11
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Quote Originally Posted by Jdscrapz View Post
    How so..
    How about this.........We buy the material for you.......Then research who and where to sell it.............We then collect the profits and just turn them directly over to you...........I scour this site as well as several others each and every day for buyers, materials, ideas, etc.......I suggest you do the same if you wish to be successful......I am not rich nor do I have a large operation with heavy machinery, forklifts, warehouses etc but a decent living can be made off this stuff if you do the legwork........I am an individual working out of his garage but I have low overhead and am able to easily make more doing this than flipping burgers.......Get off the net and get out there.......Make some mistakes............I bought 100's if not 1000's of computers before I even considered trying to put one back together........I can build practically any desktop out there and that is within two years...........Laptops are not my specialty but if they boot I can make them work, upgrade, etc............Oh well moral of the story is do your own research, send messages to buyers (YES THEY WILL ANSWER) and as the old commercial said "JUST DO IT"

  17. The Following 7 Users say Thank You for This Post by mikeinreco:


  18. #12
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    I could have sworn that I replied to a thread just like this last night!

    If you're trying to resell them, you're in a tough spot. You'll either need to become a Microsoft Registered Refurbisher to receive licenses at a lower price, or you can spend $100 for a retail license, and wipe out all profits, or you can sell them without an OS.

    You can sell to a buyer on here, and maybe make a little.

    Since you're in Canada, I don't know what shipping would cost, nor do know how our prices correspond to the Canadian dollar.

    My advice is to spend time with a spreadsheet. Pour over the numbers, and see what's realistic. That's not a guarantee by any means, but it'll help your odds a lot.

  19. The Following User Says Thank You to matador for This Post:


  20. #13
    JustInTime's Avatar
    SMF Badges of Honor


    Member since
    May 2012
    Location
    SE Pennsy
    Posts
    192
    Thanks
    111
    Thanked 88 Times in 57 Posts
    Quote Originally Posted by mikeinreco View Post
    How about this.........We buy the material for you.......Then research who and where to sell it.............We then collect the profits and just turn them directly over to you...........I scour this site as well as several others each and every day for buyers, materials, ideas, etc.......I suggest you do the same if you wish to be successful......I am not rich nor do I have a large operation with heavy machinery, forklifts, warehouses etc but a decent living can be made off this stuff if you do the legwork........I am an individual working out of his garage but I have low overhead and am able to easily make more doing this than flipping burgers.......Get off the net and get out there.......Make some mistakes............I bought 100's if not 1000's of computers before I even considered trying to put one back together........I can build practically any desktop out there and that is within two years...........Laptops are not my specialty but if they boot I can make them work, upgrade, etc............Oh well moral of the story is do your own research, send messages to buyers (YES THEY WILL ANSWER) and as the old commercial said "JUST DO IT"
    I think that's a bit harsh. Guy is simply asking what people's opinion here on the opportunity is. I hardly think slamming the dude for posting up questions here on the forum is warranted.

    That said, my humble opinion is that they're WAY overpriced. Do a search on Ebay for sold D630's and you'll see non-working one's sell for around $20 a pop. I would base my pricing around that(that they're non-working). I would offer probably $400 tops.

  21. The Following 2 Users say Thank You for This Post by JustInTime:


  22. #14
    HiTechMike's Avatar
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    United States
    Posts
    200
    Thanks
    167
    Thanked 386 Times in 111 Posts
    Quote Originally Posted by JustInTime View Post
    I think that's a bit harsh. Guy is simply asking what people's opinion here on the opportunity is. I hardly think slamming the dude for posting up questions here on the forum is warranted.
    No doubt... He needs to give up his lead because he has asked some questions... That's ridiculous.

  23. #15
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    I hate to say it but this world is not all sunshine and rainbows........I could care less who he is getting them from as he is probably over 1000 miles away..........Dell Latitude D630 is probably the most abundant Gov't surplus laptop out there............All info can be found within 5 minutes of searching the web on this item............The OP has posted several of these same threads requesting the same info............In the words of Justin Timberlake "CRY ME A RIVER"


  24. #16
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts

  25. The Following User Says Thank You to mikeinreco for This Post:


  26. #17
    HiTechMike's Avatar
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    United States
    Posts
    200
    Thanks
    167
    Thanked 386 Times in 111 Posts
    Quote Originally Posted by mikeinreco View Post
    In the words of Justin Timberlake "CRY ME A RIVER"
    Kinda sounded like that was what was going on....

  27. #18
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Quote Originally Posted by HiTechMike View Post
    Kinda sounded like that was what was going on....
    On your part perhaps

  28. #19
    JustInTime's Avatar
    SMF Badges of Honor


    Member since
    May 2012
    Location
    SE Pennsy
    Posts
    192
    Thanks
    111
    Thanked 88 Times in 57 Posts
    Thing is, if every time someone, somewhere, asked a question on the internet and the typical smartass response was a simple "go search google", the interwebz would be nothing but those responses.

    I think his question was a perfectly reasonable one, unlike some of the shorter, "how do I scrap" or "how do I refine" crap that's often posted. He simply wanted to know if the price for a certain lot computers was a good one. It wasn't. It didn't require a snarky response telling him to quit pestering us with his questions. Why bother even responding then if that's all you're going to contribute the thread? Hell, even steering him towards where or how to begin to search for the value of those laptops(like ebay sold items) would be a better way to contribute to a conversation...

  29. The Following User Says Thank You to JustInTime for This Post:


  30. #20
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Oh well I wish all of you the best and I will keep to myself.........


  31. Similar threads on the Scrap Metal Forum

    1. Buying in bulk, looking for possible pitfalls.
      By vicpell in forum Scrap Metal Tips and Advice
      Replies: 17
      Last Post: 02-28-2015, 10:08 AM
    2. Missouri | National - Buying broken or dead laptops ( complete laptops with 14"+ good screen)
      By Misdirection in forum Scrap Buyers & Sellers
      Replies: 8
      Last Post: 03-05-2014, 09:51 PM
    3. worth buying printers in bulk
      By lmidden in forum Scrap Metal Tips and Advice
      Replies: 17
      Last Post: 12-01-2013, 06:14 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook