Results 1 to 12 of 12

Newbie to e-recycling

| Computer Recycling
  1. #1
    DFM92 started this thread.
    DFM92's Avatar
    SMF Badges of Honor

    Member since
    Sep 2014
    Posts
    12
    Thanks
    0
    Thanked 3 Times in 3 Posts

    Newbie to e-recycling

    Hello Guys,

    I am a young entrepreneur who is starting his own E-Waste business. Background info, I am very knowledgeable with the repair (both Software and Hardware) of computers and decided to start a non-profit venture for my community . After seeing the success stories and sales view of things, I have changed the direction of the business. I would like to Recycle Computers, Printers and everything IT related to later on resell at cheap prices. There is a local University in which the students can benefit from lower priced electronics, and anyone who would like a computer and does not have $600 for a new one.

    I have about 2,000 Square feet in the Basement which will serve as my base of operations for right now (This will include a dis-assembly , Test , scrapping areas).

    I just filled for my TAX ID, and LLC paperwork (should be coming next week). The only thing I am stuck on is WHERE TO GET THE EQUIPMENT FROM!!!



    I have checked on Craigslist, Ebay, etc and have stumbled across large computer lots taken from Hospitals, Businesses and Schools. Based on your expertise, how do I approach these institutions for their equipment? Is there a bidding / buying process? I know most recyclers pay by the pound for their electronics, but how do they reach these individuals?


    THANK YOU (and please, comment to educate and to help, not to troll or make fun ).


  2. #2
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    1. Study old threads, study old threads, study old threads.

    2. Network, network, network.

    3. Advertise, advertise, advertise.

    Do those 3 things and we will answer any questions you may have.
    "anyone who thinks scrappin is easy money ain't doin it right!"

  3. The Following 4 Users say Thank You for This Post by EcoSafe:


  4. #3
    Scrappah's Avatar
    SMF Badges of Honor



    Member since
    Jun 2014
    Posts
    1,058
    Thanks
    320
    Thanked 1,419 Times in 676 Posts
    Welcome to the board !

    The standard advise given to someone new is to read,read,read. It's all here in the different threads.

    It's just a suggestion, but one thing you might do before jumping in is to do a bit of networking in your local market area. Maybe get a feel for who might already be doing it ? The competition for the e-waste resource is pretty intense in some areas and less so in others.

  5. The Following 3 Users say Thank You for This Post by Scrappah:


  6. #4
    spinroch's Avatar
    SMF Badges of Honor

    Member since
    Dec 2013
    Location
    Rochester, NY
    Posts
    675
    Thanks
    1,983
    Thanked 1,556 Times in 460 Posts
    Find a niche market. Network. Talk to people in business that you may know. Polish up your presentation on what you can do for them that the others aren't doing. It's all in your network. If you don't have one, start building it.
    F1 Recycles

    Electronic/Electrical/Mechanical Recycling
    www.f1recycles.com


  7. The Following 3 Users say Thank You for This Post by spinroch:


  8. #5
    DFM92 started this thread.
    DFM92's Avatar
    SMF Badges of Honor

    Member since
    Sep 2014
    Posts
    12
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Thank you olddude! I've been reading most of your replies and you my friend are a knowledgeable individual !

    The only issue I am having is searching for the information... im not too familiar with the LINGO yet so its a bit tough.. but I will find a way!

    Thank you!

  9. The Following User Says Thank You to DFM92 for This Post:


  10. #6
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    I agree with the others suggestions.

    You may have gotten the horse before the cart. I know the tax id is free or nearly so and as I understand it the LLC does not cost a lot but these things seem to be seconday to learning the trade.

    As far as the resale of computer parts its a market that requires study and experience. Personally if I needed a new computer it would most likely be a laptop and I can buy new ones at Best Buy for a little over $300. Your assumtion that college students are in need of used and inexpensive computers I think likely exaggerated. There are good markets for used computers, check out ebay.

    I suggest you walk before you run. I do wish you the best of luck and please let us know how things go. Mike
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  11. The Following User Says Thank You to miked for This Post:


  12. #7
    armstrt8's Avatar
    SMF Badges of Honor


    Member since
    Apr 2014
    Posts
    148
    Thanks
    56
    Thanked 142 Times in 61 Posts
    First thing I decided to do when scrapping was buy an LLC and get 1k business cards printed off and opened up a second bank account with a tax ID.
    So far the LLC hasnt been used at ALL, zero money ever went into the bank account, and I still have about 990 business cards.
    Would I say any of that was a mistake? Definitely not, BUT the only time I actually started learning was when I had scrap in my hands. I read and read, but it all went out the window until I was actually doing.

    I also posted on here as soon as I started and got a few people telling me I did things too fast. At the time I didn't think it was true, but now I KNOW it was true haha =D

    As for the diversity of eScrap and what can be done with it is nearly endless. Like Sinroch said, you have to find a niche. Research into resale of parts, or specialize in refurbishing full systems, or break them down completely to the Caps/pins/Diodes/etc. I recommend getting a load of material and going from there... see what you like.

    Wish ya the best!

  13. The Following User Says Thank You to armstrt8 for This Post:


  14. #8
    Sirscrapalot's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    A sandbar off the atlantic..OBX,NC
    Posts
    6,123
    Thanks
    11,885
    Thanked 8,783 Times in 3,854 Posts
    Quote Originally Posted by olddude View Post
    1. Study old threads, study old threads, study old threads.

    2. Network, network, network.

    3. Advertize, advertize, advertize.

    Do those 3 things and we will answer any questions you may have.
    This x20!

    An 4. The search feature is your friend.

    Sirscrapalot - Keeper of the traveling cooler.

  15. The Following User Says Thank You to Sirscrapalot for This Post:


  16. #9
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    Buy computers and start taking them apart...........Hopefully after taking apart some you will begin to identify parts and be able to put them back together.....

  17. #10
    t00nces2's Avatar
    SMF Badges of Honor


    Member since
    Jul 2014
    Location
    Sarasota, FL
    Posts
    1,693
    Thanks
    1,187
    Thanked 2,341 Times in 958 Posts
    I don't know about an LLC, but under my S Corp, I can do whatever I want. I can work my handyman trade, or I practice my computer repair business, or I can do computer help and training, or anything else I want to do as income. If you decide you don't want to use the LLC for e-scrap business, you and use it for a repair and training business... Just don't name the LLC something on the order of "Complete Computer Destruction as Well as the Annihilation of all Usable Data LLC" or you may have trouble attracting repair business.

  18. #11
    SMF Badges of Honor

    Member since
    Mar 2014
    Location
    LaPorte, IN
    Posts
    4
    Thanks
    1
    Thanked 1 Time in 1 Post
    I would suggest learning about and making a plan for data destruction. Will you be wiping and reselling hard drives? Shredding them? How can you assure your customers that their data is protected? What kind of protection can you provide yourself in case someone ever comes back to you saying that information on a hard drive given to you ever gets lost or stolen?

  19. #12
    matador's Avatar
    SMF Badges of Honor

    We purchase laptop computers and many components for greater than scrap value. We offer a shipping reimbursement program.replies

    Member since
    Nov 2013
    Location
    Big Wonderful Wyoming
    Posts
    2,310
    Thanks
    1,813
    Thanked 3,204 Times in 1,450 Posts
    Quote Originally Posted by t00nces2 View Post
    Just don't name the LLC something on the order of "Complete Computer Destruction as Well as the Annihilation of all Usable Data LLC"

    How would that even fit on a truck?

    --------------------------------------

    Read up. Take apart some computers, and start small. As for resale, it's just something that grows. When I started my computer repair and sales business, I ran newspaper ads and eventually moved up to radio ads (Radio is overpriced out here). It's built off of that. Now, I'm doing the same thing with E-Waste. Set up a couple of "free collection events", and bring business cards, and have signs on your truck. The people will come.

    Two tips for you: You may want to charge for CRTs. And, basements really stink for E-Waste. After the 150th time up the stairs to my truck to unload, it gets really old


  20. Similar threads on the Scrap Metal Forum

    1. Nickel Hi Temp Alloy Recycling - Nickel, Tungsten Metal Powder & Sludge Recycling
      By americanscrapmetal.com in forum Introduce yourself
      Replies: 9
      Last Post: 12-13-2018, 02:37 AM
    2. Our recycling center dabbing in E-Recycling.
      By tjlock in forum General - Let's talk business
      Replies: 2
      Last Post: 06-01-2014, 10:26 PM
    3. Hi everyone! Newbie here...:)
      By scalemomma in forum Introduce yourself
      Replies: 5
      Last Post: 06-05-2013, 01:15 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook