Results 1 to 4 of 4

Scrap medals #1 & 2 copper ect

| Beginners Start Here - Metal Recycling Basics
  1. #1
    mposs545 started this thread.
    SMF Badges of Honor

    Member since
    Jan 2021
    Location
    Georgia
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Scrap medals #1 & 2 copper ect

    Newbie here. Curious how this works exactly?
    I had som scrap I wanted to sell but it's Sunday so basically google lead me here?!?



  2. #2
    kss's Avatar
    SMF Badges of Honor


    Member since
    May 2019
    Location
    PA
    Posts
    839
    Thanks
    465
    Thanked 715 Times in 403 Posts
    #1 no solder or paint or anything. Just copper (tubing or other.... But stripped wire should get you a higher price that #1 as 'bare bright')

    #2 same as #1 but allowed to have solder on it

    Usually if I have copper pipes I cut off all the joints where there is solder and all that goes as #2 (or sometimes the joints are brass) and then the rest (clean copper pipe) goes as #1. The pricing difference isn't HUGE but usually worth the few seconds to do some separating for a few extra cents per lb


    Currently prices at my yard are

    Bare bright $2.70/lb
    #1 $2.65/lb
    #2 $2.45/lb
    Sheet/light copper $2.30/lb
    Last edited by kss; 01-24-2021 at 08:32 AM.

  3. The Following 4 Users say Thank You for This Post by kss:


  4. #3
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    It depends on where you are, maybe 9n what yard you go to, and what they are aiming to sell at the time.
    Here.
    #1 is 'Berry Copper'. Basically clean Copper wire, without varnish or oxidation, that's come from electrical cables, like welders leads, or heavy duty cable that's had the outer insulation sheith removed.
    And heavy clean, no solder or dirt, Copper tubing.

    #2 Copper wire with varnish on it.
    I used to get #2 prices for Microwave transformer coils, it's a solidly wound coil with varnish & some glue/extra varnish & paper insulation stuck to it. Now I don't, its 'Copper domestic'.

    Copper Domestic, basically any Copper in any shape, that's not contaminated with another metal except Silver solder soldered plumbing joints.

    Copper/Ali, Aluminium radiators with Copper tubing in them. Airconditioning radiators, Computer heatsinks.

    Copper/Brass, Car radiators, the older Copper sort, Copper contaminated with Brass such as fittings.

    Copper sheet might have its own price.

    Copper hot water cylinders, it might be just a NewZealand thing though

  5. The Following User Says Thank You to eesakiwi for This Post:


  6. #4
    hills's Avatar
    SMF Badges of Honor



    Member since
    Sep 2017
    Location
    Maine
    Posts
    1,351
    Thanks
    797
    Thanked 1,276 Times in 721 Posts
    The basic categories where i am are:

    Bare bright: It's solid bare wire that is at least 16 gauge or larger. It's also bare cable which is composed of individual strands that are at least sixteen gauge or larger. As the name implies, it has to be bright and shiny like a new penny.

    #1 copper: It could be any wire or cable that is 16 gauge or larger that is tarnished. Also unused plumbing fittings & pipe that are tarnished.

    #2 copper: ( The most common scrap copper ) It's mostly wire and pipe that is contaminated in some way. Paint, varnish, heavily tarnished with a green color. Also, tinned copper wire & cable that looks silvery. Also, any bare wire or cable that is finely stranded. Most stripped out welding cable would fall into this category because the individual strands are less than 16 gauge.

    Sheet copper: Either copper sheet -or- most anything made from a sheet of copper. Copper hot water heater tanks seem to fall into this category because they were originally made from sheets of copper.

    All around ... every yard is a little different in the way they grade their scrap. Just ask the scale guy if you are uncertain about something.


  7. Similar threads on the Scrap Metal Forum

    1. Replies: 1
      Last Post: 02-05-2018, 11:43 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook