Results 1 to 18 of 18

Different types of Brass

| Scrap Metal Tips and Advice
  1. #1
    Troybud started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post

    Different types of Brass

    I looked for this answer but couldnt find it on here.



    I got some of what i think is red and yellow brass thats connected together and i was wonderin the easy way to disconnect them.
    Thanks

  2. The Following User Says Thank You to Troybud for This Post:



  3. #2
    Mulden's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Sheffield, England
    Posts
    93
    Thanks
    20
    Thanked 43 Times in 29 Posts
    If they're screw threads then a vice and a wrench will be the best (washing up liquid if its stiff). If they're welded then you'll have to hacksaw/angle grind them apart. I personally don't bother - my yard will accept both as mixed brass and it's a high enough payout for the relatively small amounts I deliver.

  4. #3
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Check to see if your yard pays a different price for each, like above post says may not be worth the hassle.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  5. #4
    Troybud started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    ok thanks
    my yard does to but i dont find much brass so i didnt no what the price difference was.
    I also found like 15 pounds of brass keys should i just put it all together then?

  6. #5
    Mulden's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Sheffield, England
    Posts
    93
    Thanks
    20
    Thanked 43 Times in 29 Posts
    Triple check they're brass and not zinc/stainless which are more common in modern keys. Otherwise yes, lump 'em in.

  7. The Following User Says Thank You to Mulden for This Post:


  8. #6
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    That would probably work to mix the keys but make sure they are not on a steel key ring and just to be safe maybe keep them separate till you get to the scale and toss them in if they give you the nod.

  9. #7
    Troybud started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    I took all the rings off and went over them all with a magnet
    And most of them are over 20 years old i found them when i was cleanin out a HUD home i think a locksmith used to live there

  10. #8
    Filthy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Northern New Jersey
    Posts
    780
    Thanks
    850
    Thanked 372 Times in 202 Posts
    i had a brass rod that was yellow on one end and red on the other, it was strange, but because i dont deal with enough red brass, i just let it go in as yellow. the difference was like $1.50 for yellow and $1.70 for red, so i didnt bother with it.

    the keys are yellow brass, and unless they are car keys with a plastic encased top, they just go right in the yellow pile/bucket. nice find!
    We're the renegades of Junk!

  11. The Following User Says Thank You to Filthy for This Post:


  12. #9
    SMF Badges of Honor


    Member since
    Sep 2011
    Posts
    39
    Thanks
    1
    Thanked 7 Times in 5 Posts
    i always toss them in with red if they have yellow connected..as long as you dont make a huge habit of it most yards wont care..

  13. #10
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Be certain the red is brass and not copper. What kind of connectors or pieces of things do they look like they might be from?

  14. The Following User Says Thank You to newattitude for This Post:


  15. #11
    ScrapperNJ26's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Clementon NJ
    Posts
    512
    Thanks
    537
    Thanked 148 Times in 89 Posts
    To answer your question there are 3 types of brass: Red, Yellow, and White

  16. The Following User Says Thank You to ScrapperNJ26 for This Post:


  17. #12
    Troybud started this thread.
    SMF Badges of Honor


    Member since
    Nov 2011
    Posts
    14
    Thanks
    0
    Thanked 1 Time in 1 Post
    Most of it i think is from a old underground water meter and then i found a bunch of fittings that connect to air hoses.
    But i know the difference from copper and brass lol

  18. #13
    Mulden's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Sheffield, England
    Posts
    93
    Thanks
    20
    Thanked 43 Times in 29 Posts
    Quote Originally Posted by ScrapperNJ26 View Post
    To answer your question there are 3 types of brass: Red, Yellow, and White
    What can be made of white brass? Is it noticably different in colour?

  19. #14
    ScrapperNJ26's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Clementon NJ
    Posts
    512
    Thanks
    537
    Thanked 148 Times in 89 Posts
    White brass contains more than 50% zinc and is too brittle for general use. The term may also refer to certain types of nickel silver alloys as well as Cu-Zn-Sn alloys with high proportions (typically 40%+) of tin and/or zinc, as well as predominantly zinc casting alloys with copper additive.

    It is usually a silver-ish grey.

  20. The Following User Says Thank You to ScrapperNJ26 for This Post:


  21. #15
    Mulden's Avatar
    SMF Badges of Honor


    Member since
    Nov 2011
    Location
    Sheffield, England
    Posts
    93
    Thanks
    20
    Thanked 43 Times in 29 Posts
    Does the edge look sparkly and porous when you break it? That would explain quite a few items I've found. Keys and soap dishes?

  22. #16
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Quote Originally Posted by Mulden View Post
    Does the edge look sparkly and porous when you break it? That would explain quite a few items I've found. Keys and soap dishes?
    That sounds right, I found some red brass in a copper (actually brass) fireguards feet, like this pic>
    The first time I have ever found any 'red brass'.

    I did find some 'white brass' in some antique milking machinery. My guess is that its hard to find & only a little difference in price anyway.
    Unless theres a lot, which can happen if you are scrapping machinery & find a large amount of certain parts, I'd put it in with brass.
    Here, brass is worth$5 & Copper $7 a Kg, so the difference in price would only be a few 10's of cents.
    Somebody will probably 'call me out' on that though.

    I still have a pic in my mind of the scrapper who did a dive off the trucks bed so that a co'worker didn't put the Ali/bronze in with the Phosphur/bronze.....

  23. The Following User Says Thank You to eesakiwi for This Post:


  24. #17
    skipRAT's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    East London / Essex, England
    Posts
    173
    Thanks
    63
    Thanked 52 Times in 38 Posts
    Quote Originally Posted by ScrapperNJ26 View Post
    To answer your question there are 3 types of brass: Red, Yellow, and White
    Thanks fella's
    Until i read this post i genuinly thought that there was only one type of brass?
    Something else i have learned from this forum.....TOP ONE..!!

    Be Lucky
    Be Lucky

  25. #18
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    12
    Thanks
    0
    Thanked 1 Time in 1 Post
    Brass is an alloy of zinc and copper. It's basically yellowish which is like gold. It is widely used in the manufacturing of ornaments and other. There are many types of brass like Admiralty, Aluminum and Arsenical.


  26. Similar threads on the Scrap Metal Forum

    1. Music types
      By easyrecycle in forum Off Topic Discussions
      Replies: 40
      Last Post: 08-26-2015, 11:01 PM
    2. brass ends on powercords, brass connectors on crimped wires in monitors & tvs
      By copycat in forum Scrap Metal Questions and Answers
      Replies: 18
      Last Post: 06-17-2013, 09:09 PM
    3. types of certification?
      By mattcotner in forum General Electronics Recycling
      Replies: 10
      Last Post: 11-02-2012, 07:48 PM
    4. different types of steel
      By sweeney in forum Scrap Metal Questions and Answers
      Replies: 9
      Last Post: 07-26-2012, 08:50 PM
    5. Types of Aluminum
      By Ironhead in forum Scrap Metal Prices
      Replies: 13
      Last Post: 08-13-2011, 08:33 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook