|
Does anyone know what category of insulated wire this would be considered? I have about 90 lbs of this wire and am considering selling it as is. I am also looking for a recommendation as to a yard in northern NJ to bring this. Thanks!
PS: Please dont mind the chipped nail, Im overdue for a mani....thanks brasscatcher
Last edited by thirsty; 07-02-2012 at 01:16 AM.
Metal Recycling Entrepreneur
|
i would say its copper and you will get a better price if you strip it ...in my experience those are fairly easy to strip, the rubber coating on the internal wires are soft and comes off with little effort, just cut it into manageble strips say 10 foot lengths ,you can go longer but , you will get the twist effect and it will be a real pain in the butt.....but definately worth breaking down i would get almost .80 more /pound if it were stripped, good find
|
If that is four strands of solid wire I would strip it. Also depends on if you have the time to strip it. You have to know what your price would be comparing stripped to unstripped and you would only know that if you call the yard. Check out scrap monster on top of page to get an idea between the two prices.
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.” John Wayne-- The Shootist
NEWBS READ THIS THREAD ABOUT REFINING!!!!
http://www.scrapmetalforum.com/off-t...ning-read.html
|
|
Btw a pedi is for your toes a mani is for your fingers....can you tell I live with three women in my house
|
|
Originally Posted by BRASSCATCHER
Btw a pedi is for your toes a mani is for your fingers....can you tell I live with three women in my house
lmao.
Metal Recycling Entrepreneur
might help to strip the ends out a bit to photograph it
Metal Recycling Entrepreneur
|
Looks like stranded wire to me but I would def strip it. atleast double your money .
Metal Recycling Entrepreneur
Looks like #10 size SO/ SOW cable. If you have 90# insulated you should have 50 to 60# stripped (estimated). This wire is easy to strip compared to others, but I have found holding the knife still and pulling the wire works better that moving the knife along the wire?
Metal Recycling Entrepreneur
|
I'll have to try that, Whm1!
Metal Recycling Entrepreneur
|
Its not 90%...its more like 60 to 70
|
I agree with Whn1, I sit in a chair with hard plastic armrest hold the knife on the wire and pull the the wire under the knife. I would definitly strip it.
|
|
Got a price of .92 per lb today. Looks like Ill be stripping it, lol.
I don't see you being sorry that you stripped it instead of selling it whole. Mike.
"Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}
Now go beat the copper out of something, Miked
|
|
Late night stripping the wire in the pic above. After stripping the black insulatation off I began stripping the inner wires. Most of the wire is so brittle its not allowing me to strip past 3 or 4 inches without getting hung up in my stripper. I stripped as much of the "good" wire I could have. I reweighed the wire I could not strip easily and it weighed in at 66.5 lbs. This will be considered insultated thhn and will fetch $1.62 per lb. So, if I did the numbers right, I would have recieved around $82.80 for leaving the wire as is. I should get $105.30 for the wire as it is now. The difference being $22.00 more. It took me about 2 hours total plus I yielded a few pounds of #1 which should pay out 3.20 per lb. Worth it in my opinion.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks