Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Abandoned Rail Lines

| Scrap Metal Spots
  1. #1
    gustavus is offline Metal Recycling Entrepreneur
    gustavus started this thread.
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts

    Abandoned Rail Lines

    Get permission first and be prepared to pay for it. Rail weighs about 35 lb to the foot and it cuts really nice with a torch.



    Added bonus, the ties can be sold to landscapers.

  2. The Following User Says Thank You to gustavus for This Post:



  3. #2
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    There is a stretch of rail not far from me that when they replaced the track the old was just pushed off to the side. It goes on for as far as I can see...Schwing.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  4. #3
    rca987's Avatar
    SMF Badges of Honor

    Member since
    Jan 2011
    Location
    Texas
    Posts
    938
    Thanks
    46
    Thanked 385 Times in 223 Posts
    Before I found this forum, I used to live near an old railroad, and would pick up the ties, and plates and whatever else was metal out there...
    Garbage keyboards > spɹɐoqʎǝʞ ʎɐqǝ

  5. #4
    sjones99's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    iowa
    Posts
    266
    Thanks
    26
    Thanked 59 Times in 41 Posts
    Railroad material is considered federal property...so you better have documentation!

  6. #5
    Filthy's Avatar
    SMF Badges of Honor

    Member since
    Jul 2011
    Location
    Northern New Jersey
    Posts
    780
    Thanks
    850
    Thanked 372 Times in 202 Posts
    anything on the ROW (right of way) belongs to the rail lines. good luck, dont steal the steel

  7. #6
    CMHN's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Berwick, Pa
    Posts
    380
    Thanks
    49
    Thanked 339 Times in 111 Posts
    There is no such thing as an abandoned rail line. Those lines are still owned by the railroad, and anything that is there is their property. If you take it without permission, you will go to jail. None of my scrap yards will accept any rail's, or fasteners from a rail line.

    Even being on their property without permission is a federal offense and in today's society can be considered an act of terrorism. I know that in my area if a passing train see's you walking along their line's the engineer will contact the local authorities and you will be questioned if not charged for trespassing.

    There not worth it and better left untouched.
    CMHN Recycling

  8. #7
    gustavus is offline Metal Recycling Entrepreneur
    gustavus started this thread.
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    You would think there were thieves on this forum with all the cautionary warnings - red flags that go up when a suggestion has been made where to find iron.

    If your a legitimate business man, follow the channels to obtain rights to that scrap.

    The Railways do offer scrap up for tender.

  9. The Following User Says Thank You to gustavus for This Post:


  10. #8
    CMHN's Avatar
    SMF Badges of Honor


    Member since
    Jul 2011
    Location
    Berwick, Pa
    Posts
    380
    Thanks
    49
    Thanked 339 Times in 111 Posts
    Not everybody is a thief on here, but there are the fly by night scrappers that come on here to make "easy" money. We have to make sure they know what is right and what is wrong.

  11. #9
    gustavus is offline Metal Recycling Entrepreneur
    gustavus started this thread.
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by CMHN View Post
    There is no such thing as an abandoned rail line. Those lines are still owned by the railroad, and anything that is there is their property. If you take it without permission, you will go to jail. None of my scrap yards will accept any rail's, or fasteners from a rail line.

    Even being on their property without permission is a federal offense and in today's society can be considered an act of terrorism. I know that in my area if a passing train see's you walking along their line's the engineer will contact the local authorities and you will be questioned if not charged for trespassing.

    There not worth it and better left untouched.
    Yes there is abandoned rail lines, I know of several, once the track has been removed one such line became part of the Canada trail while others have been offered to land owners who have adjacent property to the abandoned section of line paralleling their property.

    In Birnie MB I found 5 unclaimed acres across the road from our holdings, when I made an inquiry to obtain this parcel the land owner closes to the line grabbed it.

    The little 5 acer parcel application had been lost in a divorce until I came along blowing my whistle. The land I was after used to the the cattle yard for the railway.

  12. #10
    SMF Badges of Honor

    Member since
    May 2012
    Location
    Pennsylvania
    Posts
    2
    Thanks
    0
    Thanked 1 Time in 1 Post
    I just wanted to add I see alot of people talk about cutting rail with a torch if you dont already know take your torch and just notch the top or bottom of track bottom the best just make a small cut say every 2 feet then put 1 end of the track on a block like 5 6 inches off ground let cool some then hit it with a sledge hammer it will break everywhere you notch it.Try it saves fuel.Rail has alot of cast iron in it local scrap dealer told me this.

  13. The Following User Says Thank You to Jackson for This Post:


  14. #11
    TexasDeere's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Spring, TX (Houston Suburb)
    Posts
    68
    Thanks
    15
    Thanked 46 Times in 19 Posts
    I had a small section of a rail spur that serviced an old warehouse building that was being converted into offices. I was working on installing a parking lot for the building owner. He wanted all of the rail spur removed and it belonged to the building owner as this spur had not been used in years and was right next to his building. I pulled it all out with a backhoe and cut it up. Loaded it on a 40' trailer and hauled it in. Immediately the yard said they could not take it because it was RR tracks. I explained the situation but it didn't change anything. I ultimately had to get a letter from the building owner explaining where it originated from. Then the building owner realized that we were able to generate some decent cash from it and wanted a reduction in the contract price for the parking lot installation. My advice, only acquire it with lots of documentation.

  15. #12
    SMF Badges of Honor


    Member since
    Aug 2011
    Posts
    585
    Thanks
    76
    Thanked 184 Times in 103 Posts
    One time I was picking RR spikes and stuff didn't know and they told me to leave and I did. I don't like to steal and never have in my life it's how I was raised

  16. #13
    SMF Badges of Honor


    Member since
    May 2011
    Location
    Dallas TX
    Posts
    1,979
    Thanks
    158
    Thanked 1,182 Times in 518 Posts
    Quote Originally Posted by TexasDeere View Post
    I had a small section of a rail spur that serviced an old warehouse building that was being converted into offices. I was working on installing a parking lot for the building owner. He wanted all of the rail spur removed and it belonged to the building owner as this spur had not been used in years and was right next to his building. I pulled it all out with a backhoe and cut it up. Loaded it on a 40' trailer and hauled it in. Immediately the yard said they could not take it because it was RR tracks. I explained the situation but it didn't change anything. I ultimately had to get a letter from the building owner explaining where it originated from. Then the building owner realized that we were able to generate some decent cash from it and wanted a reduction in the contract price for the parking lot installation. My advice, only acquire it with lots of documentation.
    I would of just told them that was factored into the price of me doing the parking lot so you already got the discount. If you want the money on the rails I will give you a new invoice for the parking lot and a invoice for the labor on ripping the rail road tracks that you can pay and you can keep the money on the tracks.

    I bet he would be said no its all good.
    My company name was Easy Recycle but has since been closed
    My Name Stephan Harz
    My YouTube page

  17. #14
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    I ultimately had to get a letter from the building owner explaining where it originated from. Then the building owner realized that we were able to generate some decent cash from it and wanted a reduction in the contract price for the parking lot installation.
    Everybody wants a slice of the pie, but the pie keeps getting smaller,,,
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  18. #15
    TexasDeere's Avatar
    SMF Badges of Honor


    Member since
    Mar 2012
    Location
    Spring, TX (Houston Suburb)
    Posts
    68
    Thanks
    15
    Thanked 46 Times in 19 Posts
    This is basically what happened but it created what I feel was an unnecessary dynamic between the customer and contractor. Still it was a headache getting all the documentation and still the scrap yard was reluctant. They just didn't think it was possible for anyone but the actual railroad to have possession of tracks.

  19. The Following User Says Thank You to TexasDeere for This Post:


  20. #16
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Bellevillle, IL
    Posts
    51
    Thanks
    51
    Thanked 69 Times in 15 Posts
    Quote Originally Posted by TexasDeere View Post
    This is basically what happened but it created what I feel was an unnecessary dynamic between the customer and contractor. Still it was a headache getting all the documentation and still the scrap yard was reluctant. They just didn't think it was possible for anyone but the actual railroad to have possession of tracks.
    In the future if this occurs, ask the nearest railroad what contractor is collected there disguarded rail...then sell that rail to that contractor at the price he is paying the railroad for their rail, or a little less may be better.

  21. #17
    charn's Avatar
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Anywhere But Here
    Posts
    250
    Thanks
    7
    Thanked 110 Times in 60 Posts
    The last rail scrap I picked up was a wire that jammed in my bike derailleur when I rode next to the tracks. What was a shortcut became a 6 mile walk with a broken bike.

  22. #18
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Quote Originally Posted by sjones99 View Post
    Railroad material is considered federal property...so you better have documentation!
    When I took my very first load of scrap in from my gramma's torn down house before I knew and understood what ''scrapping'' actually was I took in a piece of the metal (not the rail itself but the cross piece) that had been in her old garage from when my grampa had picked it up as a young man. The yard guy actually got mad and yelled at me to ''not bring any more of this I can't do anything with it.'' Never having taken anything before this into a scrap yard i didnt know why he was mad. He could have explained instead of getting all upset and getting me upset and making me feel like I had done something wrong when i didnt even know what I actually had. I had no idea what it was, it was just a piece of metal I found in her old garage and was cleaning up the garage after she died. Now I understand of course but back then i didnt and i will never take anything like that into a yard ever again!

  23. The Following 2 Users say Thank You for This Post by newattitude:


  24. #19
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    I resent the inference there are a lot of thieves here, any one who has been here for a while knows when we ferret one out they are usually harassed out of the forum. That said there are a lot of noobs here that know nothing about the rules of railroads. because of protection laws taking railroad equipment of any type even the steel slag often found along the tracks is akin to shooting an FBI* agent. even getting documentation for a purchase is risky when it comes to selling it even if you know exactly what you are doing. these laws date back to the 1800s and the Harrimans and Rockafellers when steel on the frontier was scarce and expensive, and the ranchers and black smiths found a ready supply at the nearest rr track.

  25. #20
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    USA
    Posts
    436
    Thanks
    104
    Thanked 393 Times in 167 Posts
    Ya I find from time to time people that are trying to get rid of railroad ties and I even called one of these people a couple of days ago but the ties that they had were already gone by the time I talked to the guy. Im glad that I found this thread. I will definitely try to obtain some documentation if I end up getting some.


  26. Similar threads on the Scrap Metal Forum

    1. Rail road tracks
      By roofermarc in forum Scrap Metal Spots
      Replies: 34
      Last Post: 03-21-2017, 01:29 PM
    2. used rail tracks
      By Harry in forum General - Let's talk business
      Replies: 0
      Last Post: 06-12-2012, 04:39 AM
    3. question about copper lines in refrigerators
      By redcrossnj in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 8
      Last Post: 02-02-2012, 04:03 AM
    4. Abandoned car, need advice
      By rca987 in forum Scrap Metal Tips and Advice
      Replies: 4
      Last Post: 04-18-2011, 09:18 PM
    5. buying abandoned house?
      By scrappy187 in forum Scrap Metal Questions and Answers
      Replies: 12
      Last Post: 02-08-2011, 08:42 PM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook