Results 1 to 14 of 14
  1. #1
    ComputerScrapper started this thread.
    ComputerScrapper's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    Portland, Indiana
    Posts
    497
    Thanks
    18
    Thanked 320 Times in 145 Posts

    Took a beating yesterday at the yard

    Had a lot of scrap laying around that we were just holding on to and decided it would be a good day to haul it all in...We had temps in the low 50's yesterday so it was not bad.

    we took in 350 pounds of #2 copper, 250 pounds of #2 insulated, aluminum, electric motors and batteries.



    All said and done we were completely screwed with the prices. The yard we deal with is a smaller yard but they generally have higher prices but this was not true yesterday.

    Prices across the board were down, really down. Went from .63 on alum to .51....2.90 on #2 copper to 2.60 and lost .10 a pound on motors and batteries.

    I asked what the deal was and the owner said that he did not like the numbers he was getting from his buyer so he decided to drop his prices despite the fact that his prices he was getting had actually gone up.

    I had been leaning towards keeping all of my scrap and hauling it into a place that is further away and that little trip made up my mind.


  2. #2
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    Hutchinson, KS
    Posts
    194
    Thanks
    133
    Thanked 120 Times in 60 Posts
    You get better prices then me. #2 copper goes for 2.50, clean Alum .43 lb, and iron runs 195 ton as of yesterday. I agree with going somewhere else to get a better price if it works for you. The only reason why I don't is my yard is 3 miles from my house and they are not picky. Fast to get you in and out and are friendly to boot.

    Hope the other yard can give you a good price and have perks

  3. #3
    sillllvar's Avatar
    SMF Badges of Honor


    Member since
    Aug 2010
    Posts
    55
    Thanks
    36
    Thanked 10 Times in 9 Posts
    I'm hoarding my copper + Brass until I have a good load and then driving the hour to the seaport scrap yards, I'm tired of my local guys prices! I see other areas of the country and it amazes me that it's so different. I live an hour away from a major port, so It's not like these local guys have far to haul there scrap to the docks. It's like you said Computerscrapper, the guy is just looking for a bigger cut. I'm sure he will loss custom, vote with your feet buddy,that's what I do all the time round these parts

    It's really amazing how different prices range from yard to yard. I have two within 15 mins of my house. One was offering for extruded Alum 55 cents a pound and the other was 45 cents a pound! 10 cents of a difference! Yet on light Iron they were the same at $200 a Tonne.
    Last edited by sillllvar; 01-07-2012 at 10:02 AM.

  4. #4
    Hypoman's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    Indiana
    Posts
    1,268
    Thanks
    2,772
    Thanked 1,331 Times in 512 Posts
    Yeah same here CS. Rochesters prices were WAY down compared to what they normally are.......... I felt screwed that day!
    Determine never to be idle. No person will have occasion to complain of the want of time who never loses any. It is wonderful how much may be done if we are always doing.
    Thomas Jefferson

  5. #5
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Just the winter prices, our's took a hit over here also, sit on the rest of it till spring and the prices should start creeping back up.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  6. #6
    Midnight's Avatar
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    McHenry County, IL, USA
    Posts
    242
    Thanks
    41
    Thanked 153 Times in 79 Posts
    Winter Pricing. If you can, hold everything but your shred until the prices go back up in the spring.

  7. #7
    EcoSafe's Avatar
    SMF Badges of Honor



    Member since
    May 2011
    Posts
    3,705
    Thanks
    3,713
    Thanked 6,807 Times in 1,954 Posts
    those prices are pretty consistant to what we have been getting arround here for over a month. Im taking in about 20 lbs of copper as I need to for gas money and pocket change. hoarding the rest for better days, that is if there are any better days ahead. alu and lite iron are just a waste of time arround here with the cost of fuel for a 40 mile round trip to town.

  8. #8
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    I had been hoarding and decided to take a load in for some grocery money and jeebus did I take a hit on copper - $2.20 on #2 . Now, i didn't take much in, just enough to round out the haul and figured why not. Jeebus, learned why not lol, back to hoarding #2 copper anyways. Aluminum was down a nickel.

  9. #9
    ComputerScrapper started this thread.
    ComputerScrapper's Avatar
    SMF Badges of Honor


    Member since
    Mar 2011
    Location
    Portland, Indiana
    Posts
    497
    Thanks
    18
    Thanked 320 Times in 145 Posts
    I am going to chalk it up to a lesson learned...I called a yard that is about forty five minutes away and they have much better prices. Furthermore, they agreed to give me even better prices if I bring in 50 or more pounds of any item. Sad, I really liked that yard I was dealing with but the owner seems bent on losing customers by taking a much larger piece of the pie. I guess this gives me a good excuse to use the box truck to go to the scrap yard though lol

  10. #10
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    261
    Thanks
    127
    Thanked 235 Times in 109 Posts
    we all look for the very best return we can get.

    do you think the yard owner should be any different?

  11. #11
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Cincinnati, Ohio
    Posts
    286
    Thanks
    52
    Thanked 138 Times in 86 Posts
    No, but it would be nice if the owner had a better head for business...If all his customers think like computerscrapper, that yard will lose some traffic.

  12. #12
    parrothead's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Treasure Coast, FL
    Posts
    2,416
    Thanks
    667
    Thanked 2,067 Times in 953 Posts
    I always call for pricing before loading up and going in. Of course sometimes you just want to get the stuff the heck out of the way.

  13. The Following User Says Thank You to parrothead for This Post:


  14. #13
    Midnight's Avatar
    SMF Badges of Honor


    Member since
    Oct 2011
    Location
    McHenry County, IL, USA
    Posts
    242
    Thanks
    41
    Thanked 153 Times in 79 Posts
    Quote Originally Posted by ComputerScrapper View Post
    I am going to chalk it up to a lesson learned...I called a yard that is about forty five minutes away and they have much better prices. Furthermore, they agreed to give me even better prices if I bring in 50 or more pounds of any item. Sad, I really liked that yard I was dealing with but the owner seems bent on losing customers by taking a much larger piece of the pie. I guess this gives me a good excuse to use the box truck to go to the scrap yard though lol
    If you have a good history with him, I would let him know straight out that you like doing business with him, but with the difference in price, you can't afford to keep bringing him your scrap. Ask if he would be willing to match the price. Tell him that you're worried that he'll lose more scrappers to the competition and you don't want to see him hurt by the other yard. It may be that the other yard is is banking on too slim of a margin or that your yard is selling to a buyer that isn't paying enough. You may get him to rethink his pricing, if not for everyone, than maybe at least for you.

  15. The Following 2 Users say Thank You for This Post by Midnight:


  16. #14
    SMF Badges of Honor


    Member since
    Dec 2011
    Posts
    261
    Thanks
    127
    Thanked 235 Times in 109 Posts
    Quote Originally Posted by IronPirate View Post
    No, but it would be nice if the owner had a better head for business...If all his customers think like computerscrapper, that yard will lose some traffic.
    he probably will lose some business. but that may mean he makes a higher profit. he might make as much moving less volume with a higher profit margin as he did when he was paying more and running a larger volume. the yard owner is no different from all of us. if the yard owner gave one price on the phone and a different one after you had unloaded or was shorting on weight, that would be different.
    the man is being honest. can't fault him for that.


  17. Similar threads on the Scrap Metal Forum

    1. went t5o the yard yesterday, didn't know weather to laugh or cry
      By EcoSafe in forum Off Topic Discussions
      Replies: 10
      Last Post: 04-25-2013, 10:56 AM
    2. Cashed in yesterday/think I upset the yard a bit
      By Gnraxlrose88 in forum A Day in the Life of a Scrapper
      Replies: 11
      Last Post: 08-01-2012, 12:57 AM
    3. the yard raped me yesterday!
      By lastchance in forum A Day in the Life of a Scrapper
      Replies: 29
      Last Post: 05-02-2012, 12:21 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook