Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Cooling Your work Area

| Off Topic Discussions
  1. #1
    MelRay started this thread.
    MelRay's Avatar
    SMF Badges of Honor



    Member since
    Jan 2012
    Location
    Wilton Iowa
    Posts
    34
    Thanks
    295
    Thanked 74 Times in 14 Posts

    Cooling Your work Area

    It's hot out today, So I closed the doors and turned on my cooler. After working awhile I got to thinking that I hadn't seen any one post about how they cool their work area. Other than the electricity to run the outfit, I got everything for free from scrapping. What I use is this.... I pump water from a well into a truck radiator mounted in the corner of my shop. In front of this, so that it draws air through the radiator is an old fan that came from a scrapped put shop heater. The water then returns to the well, so no pressure really builds up in the radiator. I haven't check lately, but when I first installed it, the first 30 minutes, it dropped the temp down 3 degrees. Then one degree every half hour until I shut it off that night. The well is a old hand dug well and the water usually stays about 50 to 55 degrees. I haven't needed to run the cooler that long but I have dropped the inside temp down by 20 degrees compared to outside. Don't know if this will help anyone, but I figured it won't hurt to post it.


  2. The Following 8 Users say Thank You for This Post by MelRay:



  3. #2
    mikeinreco's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    TENNESSEE
    Posts
    4,972
    Thanks
    1,257
    Thanked 5,023 Times in 2,350 Posts
    kewl

  4. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Here is a place for parts for all kinds of misting systems; Mistcooling - Products

    How to Make Your Own Misters | eHow.com
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  5. The Following User Says Thank You to Mechanic688 for This Post:


  6. #4
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    NE, Illinois
    Posts
    162
    Thanks
    258
    Thanked 180 Times in 73 Posts
    MelRay, you've made a geothermal cooling system in it's simplest form, great thinking!

  7. #5
    SMF Badges of Honor


    Member since
    Jan 2012
    Posts
    218
    Thanks
    130
    Thanked 158 Times in 60 Posts
    Great forward thinking MelRay!I have wondered how well that would work and now we know.Sounds like you have done your homework.

  8. #6
    SMF Badges of Honor



    Member since
    Feb 2012
    Location
    OK
    Posts
    5,728
    Thanks
    6,814
    Thanked 3,464 Times in 1,989 Posts
    i just keep the beach-brella up, and my sunglasses on

  9. #7
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Central Florida
    Posts
    629
    Thanks
    117
    Thanked 211 Times in 144 Posts
    Another option is to make a cardboard radiator with a drip system on top connected to a submersible pump in a rubbermaid tote underneath pump the water up every 15 min, put a fan behind.

  10. #8
    SMF Badges of Honor


    Member since
    Jan 2012
    Location
    Central Florida
    Posts
    629
    Thanks
    117
    Thanked 211 Times in 144 Posts
    I work underground 75* all day.... Just messin

  11. #9
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I have a few car aircon radiators put aside for a similar project, the cores are Ali & about 10 x 10 x3.
    I figured to puit 3 in a row in a box & pipe the cold water thats coming into the house, or the cold water thats going into the water heater thru it.

    In reverse, I could pipe the waste hot water from the dishwasher (its HOT!) to heat up a room in the winter.

  12. #10
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by eesakiwi View Post
    I have a few car aircon radiators put aside for a similar project, the cores are Ali & about 10 x 10 x3.
    I figured to puit 3 in a row in a box & pipe the cold water thats coming into the house, or the cold water thats going into the water heater thru it.

    In reverse, I could pipe the waste hot water from the dishwasher (its HOT!) to heat up a room in the winter.
    Not even going to go into why this will not work, but it will be a good lesson.
    We buy electronic scrap, Gold Karat scrap, gold filled, refined gold, silver and many other item's.

  13. #11
    SMF Badges of Honor

    Member since
    Apr 2012
    Location
    USA
    Posts
    436
    Thanks
    104
    Thanked 393 Times in 167 Posts
    Always need a hat and work under a shaded tarp. Nothing too fancy for me.

  14. #12
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Quote Originally Posted by BarrenRealms007 View Post
    Not even going to go into why this will not work, but it will be a good lesson.
    Oh, ****, I been thinking about it a lot too.

  15. #13
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by eesakiwi View Post
    Oh, ****, I been thinking about it a lot too.
    You need to design a circulating system for it to work properly.

  16. #14
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    Ok, today while driving I saw a motorcycle in front of me with an AC strapped behind him and it was situated/wrapped and (I swear) it was wired and that he had it working somehow while he drove. Is that possible? The AC in my truck is broke and the window unit my son bought for his room he doesn't want in his room any more. Can I use it in my truck?

  17. #15
    ScrapperNJ26's Avatar
    SMF Badges of Honor


    Member since
    Jan 2011
    Location
    Clementon NJ
    Posts
    512
    Thanks
    537
    Thanked 148 Times in 89 Posts
    Quote Originally Posted by newattitude View Post
    Ok, today while driving I saw a motorcycle in front of me with an AC strapped behind him and it was situated/wrapped and (I swear) it was wired and that he had it working somehow while he drove. Is that possible? The AC in my truck is broke and the window unit my son bought for his room he doesn't want in his room any more. Can I use it in my truck?
    If you get an inverter for a 220 and you may need an upgraded alternator. I have seen one sticking out of a minivan before. It was up where the scrapyard is. One of the worst cities in the country, Camden, NJ.

  18. The Following User Says Thank You to ScrapperNJ26 for This Post:


  19. #16
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by ScrapperNJ26 View Post
    If you get an inverter for a 220 and you may need an upgraded alternator. I have seen one sticking out of a minivan before. It was up where the scrapyard is. One of the worst cities in the country, Camden, NJ.
    The small ones use 110 volt not 220. Here is something you might be interested in and it doesn't look like it'll break your budget.
    Portable air conditioning - 12 volt - air conditioners - Evaporative coolers
    Portable 12V Air Conditioner --Cheap and easy!


  20. #17
    msearl3244's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Waterloo, Iowa
    Posts
    218
    Thanks
    234
    Thanked 289 Times in 96 Posts
    I live in Iowa also. It was crazy hot yesterday for around here. Two of the bay areas in my scrap shop are air-conditioned and I have doors between them and the warehouse area. It is not too difficult to cool; them as they are insulated and have lower ceilings installed. It does cost money to cool it, but it is also tolerable most of the time without running the A/C. My shop is positioned as such that the front is not in direct sunlight and it seems there is usually a nice breeze.
    There may a million better places to live than Iowa, but none of them are home!

  21. #18
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by Mechanic688 View Post
    The small ones use 110 volt not 220. Here is something you might be interested in and it doesn't look like it'll break your budget.
    Someone please slap some sense into these guy's.

  22. #19
    SMF Badges of Honor


    Member since
    May 2012
    Location
    SC - NC State Line
    Posts
    220
    Thanks
    50
    Thanked 120 Times in 76 Posts
    I have lived without A/C for so long now, I wouldn't know what to do if I didn't sweat my *** off. On a serious note, on the hottest of days, we generally hang our wet laundry on a drying rack in front of the fan pulling the cooler air from the shady side of the house through and another fan pulling the air from inside the house out the front door. This little cheap (redneck style) cooler actually works fairly well. and with only the two fans going, it costs about $15/month to operate it. I didn't count washing the clothes, because that has to be done anyway. Also, not using an electric dryer saves us about $30/month. So, I guess we are really cooling our home for free. ) The down side is, when it is really hot 100F or more, it only brings the air temp down to 85 or so, which is a big improvement on 100+, but most folks keep their air between 65F and 72F.

    One big perk for not having air conditioning is. When its 90F-100F it doesn't bother me near as much while outside working, than it does a lot of others. Sorry for rambling on, folks.


    Happy Scrappin !!!

  23. #20
    BarrenRealms007's Avatar
    SMF Badges of Honor

    Member since
    Jun 2012
    Location
    Arkansas
    Posts
    398
    Thanks
    203
    Thanked 365 Times in 163 Posts
    Quote Originally Posted by theelectronrecycler View Post
    I have lived without A/C for so long now, I wouldn't know what to do if I didn't sweat my *** off. On a serious note, on the hottest of days, we generally hang our wet laundry on a drying rack in front of the fan pulling the cooler air from the shady side of the house through and another fan pulling the air from inside the house out the front door. This little cheap (redneck style) cooler actually works fairly well. and with only the two fans going, it costs about $15/month to operate it. I didn't count washing the clothes, because that has to be done anyway. Also, not using an electric dryer saves us about $30/month. So, I guess we are really cooling our home for free. ) The down side is, when it is really hot 100F or more, it only brings the air temp down to 85 or so, which is a big improvement on 100+, but most folks keep their air between 65F and 72F.

    One big perk for not having air conditioning is. When its 90F-100F it doesn't bother me near as much while outside working, than it does a lot of others. Sorry for rambling on, folks.


    Happy Scrappin !!!
    Well now that is a bird of a different feather. This is know as evaporative cooling. It is used a lot in live stock buildings.


  24. Similar threads on the Scrap Metal Forum

    1. CRT's / Projection tv cooling liquid
      By newattitude in forum Scrap Metal Questions and Answers
      Replies: 45
      Last Post: 12-07-2015, 02:28 PM
    2. Lets see you set of tools and work area
      By matt018 in forum Tools and Equipment
      Replies: 13
      Last Post: 09-11-2012, 12:48 PM
    3. Look at my name work area!
      By kcscrapper in forum Off Topic Discussions
      Replies: 12
      Last Post: 08-31-2012, 08:54 AM
    4. cooling system
      By EcoSafe in forum A Day in the Life of a Scrapper
      Replies: 3
      Last Post: 11-30-2011, 11:46 AM

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook