Results 1 to 13 of 13

hi from nc

| Introduce yourself
  1. #1
    shootsitall started this thread.
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    coast of nc
    Posts
    110
    Thanks
    261
    Thanked 132 Times in 53 Posts

    hi from nc

    hi all,
    ive been lurking for several weeks and have found lots of helpful info already. ive spent a lot of time here reading old threads about escrap, and am really looking forward to taking advantage of the knowledge here.
    i started collecting beer cans about five years ago,and when it came time to clean up our backyard shooting range,i took the old targets (a few washer,microwaves and an old hot water heater) to the "metal man" with my cans.when he handed me $150 for a load of old rusty metal,i was hooked. since then i have done a little bit of everything from tearing down old barns to stripping wire. i look everywhere i go for something with some metal i can throw on the pile. i have already picked up a few tips and tricks here and hopefully i can share a few of mine.
    thanks a lot and good scrapping to all.



  2. #2
    Mick's Avatar
    SMF Badges of Honor



    Member since
    Aug 2010
    Location
    Palermo, Me
    Posts
    3,405
    Thanks
    363
    Thanked 3,086 Times in 1,326 Posts
    Welcome to the Forum. Getting $150 for old junk laying around does tend to get attention.
    People may laugh at me, but that's ok. I laugh all the way to the bank.

  3. The Following User Says Thank You to Mick for This Post:


  4. #3
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    NorthEast GA
    Posts
    170
    Thanks
    162
    Thanked 37 Times in 23 Posts
    Welcome aboard!

  5. The Following User Says Thank You to Reelman65 for This Post:


  6. #4
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    Welcome to the forum.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  7. The Following User Says Thank You to KzScrapper for This Post:


  8. #5
    skipRAT's Avatar
    SMF Badges of Honor


    Member since
    Dec 2011
    Location
    East London / Essex, England
    Posts
    173
    Thanks
    63
    Thanked 52 Times in 38 Posts
    Well done Shootsitall and welcome to the forum
    Yeah so you have got the "bug", and you have seen there is so much information on here
    Be Lucky
    Be Lucky

  9. The Following User Says Thank You to skipRAT for This Post:


  10. #6
    Dumpster-Dee's Avatar
    SMF Badges of Honor



    Member since
    Feb 2011
    Location
    SW Georgia
    Posts
    1,775
    Thanks
    2,286
    Thanked 838 Times in 457 Posts
    welcome shoot...happy that you joined us....look forward to your posts.

  11. The Following User Says Thank You to Dumpster-Dee for This Post:


  12. #7
    PartTimeScrapper's Avatar
    SMF Badges of Honor



    Member since
    Aug 2011
    Location
    Morrison, Colorado
    Posts
    3,400
    Thanks
    1,004
    Thanked 3,256 Times in 1,335 Posts
    Welcome aboard.

  13. The Following User Says Thank You to PartTimeScrapper for This Post:


  14. #8
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Hi and welcome to the forum. Where in NC are you located? Mike.
    "Profit begins when you buy NOT when you sell." {quote passed down to me from a wise man}

    Now go beat the copper out of something, Miked

  15. The Following User Says Thank You to miked for This Post:


  16. #9
    SMF Badges of Honor

    Member since
    Jan 2012
    Posts
    89
    Thanks
    0
    Thanked 31 Times in 18 Posts
    Welcom keep that brass form shooting as will that can add up fast

  17. The Following User Says Thank You to maxa for This Post:


  18. #10
    SMF Badges of Honor


    Member since
    Jul 2010
    Posts
    24
    Thanks
    6
    Thanked 3 Times in 3 Posts
    welcome lots of good info and tricks here

  19. The Following User Says Thank You to rtk88 for This Post:


  20. #11
    shootsitall started this thread.
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    coast of nc
    Posts
    110
    Thanks
    261
    Thanked 132 Times in 53 Posts
    thanks for the warm welcome all.
    hey MIKED i live just down the road from you in newport!! and i love to take a hatchet and beat the copper out somethin with you sometime. that is an awesome quote.
    MAXA,i know what you mean with that brass.it does add up quick.anything that dosent get reloaded, i pop the primers(just so the yard wont complain) and toss them in a bucket.
    ive already found several nice bits of info here that will help put some extra cash in my pocket. i still have a lot to learn and the archives here are full of great info...THANKS ALOT.

  21. The Following User Says Thank You to shootsitall for This Post:


  22. #12
    shootsitall started this thread.
    SMF Badges of Honor

    Member since
    Feb 2012
    Location
    coast of nc
    Posts
    110
    Thanks
    261
    Thanked 132 Times in 53 Posts
    MIKE, i was reading some older posts and noticed that you do e waste. i have been doing this for a couple years now am i get sick every time i go to the dump and drop off a load that could be turned into a little more money. it is mostly circuit boards from all kinds of electronics. i do keep the computer boards and figured when i got enough i could ship the to someone. do you know of any local companies i could deal with to get a little something for the other stuff? also next time i head up to jacksonville i will send you a PM ahead of time and take you up on that cup of coffee if you have time. and thanks again to all for the warm welcome to the forum.
    Last edited by shootsitall; 02-07-2012 at 08:46 PM. Reason: i spell bad, sorry

  23. #13
    SMF Badges of Honor



    Member since
    Jul 2011
    Location
    Jacksonville, NC
    Posts
    4,917
    Thanks
    15,632
    Thanked 5,861 Times in 2,713 Posts
    Shootsitall, I look forward to meeting you and now we have another member here in Jacksonville. With a little cooperation we should all proper from sharing info. I will pm you with phone #, Mike.

  24. The Following User Says Thank You to miked for This Post:




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook