Results 1 to 11 of 11
  1. #1
    Mechanic688 started this thread.
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts

    Post The Burning Question; How much platinum in a hard drive platter?

    If you have ever wondered what kind of value is in the Hard Drive Platters then I have found the answer, finally.
    I think this is based on '08 prices;



    It's taken me just about forever, but I've finally found some way to answer the simple question "How much platinum is in these hard drive platters showing up on Ebay for salvage?" "The Chemistry of Computing" over at extremetech.com (article2/0,2845,1946290,00.asp) has all the facts: surface layer of Co-Cr-Pt alloy is 40-50% platinum, and the layer is ~30 nm thick. I don't have a hard drive platter in front of me, so let's just forget about the hole in the middle for a moment, so one platter from a 3.5" disk is 3.14*(3.5/2)^2=10.4 sq inches or 67.2 cm^2 ... times the 30 nm thickness (3x10^-6 cm) is 2.0x10-4 cm^3, times the (optimistic) 50% Pd, times the density of Pt (21.45 g/cm^3) and I estimate one platter has at most 2.2 mg Pt. As of 08/29/2008, the platinum spot price was 1470.00 USD per troy ounce, or more usefully, 4.73 cents per miligram. So, congratulations, you've just spent an hour of time and three cents of chemicals (just a guess, probably high) to reclaim 10 cents of platinum, probably still contaminated with cobalt and chromium depending on your recovery method. I hope you bought a whole bunch of platters cheap and rode a bike to pick them up because I doubt you'll be paying for gas let alone the shipping with the platinum. Or hope those early hard drives used a much thicker layer....
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.



  2. #2
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    I have argued and argued with people about the platinum content in hard drive platters for a long time now. I'm glad you found this on your own, and posted it yourself.

    You see hard drive platters sell on ebay all the time, people are getting burned left and right. They are really only worth their aluminum content, the Pt is negligible. Not only that but it's only be fairly recently that platinum has been used as as a percentage of the plating on hard drive platters. So all the old hard drive platters don't even have platinum in the plating.

    Scott
    At the heart of science is an essential balance between two seemingly contradictory attitudes--an openness to new ideas, no matter how bizarre or counterintuitive they may be, and the most ruthless skeptical scrutiny of all ideas, old and new. This is how deep truths are winnowed from deep nonsense. -- Carl Sagan

  3. The Following 8 Users say Thank You for This Post by NobleMetalWorks:


  4. #3
    CTscrapman's Avatar
    SMF Badges of Honor

    Member since
    Oct 2012
    Location
    CT
    Posts
    179
    Thanks
    190
    Thanked 152 Times in 65 Posts
    Nice research Mech, so from what i gather people really are buying these platters for art projects and wind chimes . Also FYI not all platters have an aluminum base.

  5. #4
    Mechanic688 started this thread.
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by CTscrapman View Post
    Nice research Mech, so from what i gather people really are buying these platters for art projects and wind chimes . Also FYI not all platters have an aluminum base.
    Yep, I found out firsthand that some of them are plated glass. I had one gentleman contact me as he wanted a large quantity of them for putting on the ceiling (hanging by fishing line) in a Disco house. Can you imagine the disco lights hitting a few hundred spinning HD platters.

  6. The Following User Says Thank You to Mechanic688 for This Post:


  7. #5
    NewbyScrapper's Avatar
    SMF Badges of Honor



    Member since
    Oct 2012
    Location
    Northern California
    Posts
    262
    Thanks
    1,480
    Thanked 175 Times in 101 Posts
    They also make great bird scarers. Using them as signalling devices, as long as the sun is shining

  8. #6
    Mechanic688 started this thread.
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Quote Originally Posted by NewbyScrapper View Post
    They also make great bird scarers. Using them as signalling devices, as long as the sun is shining
    Make a energy intensifier, line an old 8 ft. satellite dish with them then aim it towards the sun.
    Just need something out front to collect the magnified energy.

  9. The Following User Says Thank You to Mechanic688 for This Post:


  10. #7
    SMF Badges of Honor


    Member since
    May 2012
    Location
    Sebring, FL
    Posts
    62
    Thanks
    4
    Thanked 55 Times in 27 Posts
    Quote Originally Posted by NobleMetalWorks View Post
    They are really only worth their aluminum content
    So along with heat sinks, some floppy casings, and most of the hard drive casings, I could mix the platters in my aluminum scrap bin as well? I pull the boards off the hard drives and sell them separate. I can get about $0.40/lb for the remaining drive. I have about 800 lbs of remaining drives that I wanted to pull apart for the super-duper magnets. I know usually the top cover of the drive is steel, and the rest of the casing is cast aluminum.

  11. #8
    URBANERECYCLING's Avatar
    SMF Badges of Honor

    Member since
    Aug 2012
    Location
    Tampa
    Posts
    160
    Thanks
    131
    Thanked 262 Times in 89 Posts
    Good to see AJR back .......

  12. #9
    BroJer's Avatar
    SMF Badges of Honor


    Member since
    Feb 2012
    Location
    Phoenix-West Valley
    Posts
    1,004
    Thanks
    3,210
    Thanked 1,610 Times in 641 Posts
    Quote Originally Posted by Mechanic688 View Post
    Make a energy intensifier, line an old 8 ft. satellite dish with them then aim it towards the sun.
    Just need something out front to collect the magnified energy.
    I have a neighbor I would like to AIM IT AT to catch the magnified energy!! jus sayin

  13. #10
    NobleMetalWorks's Avatar
    SMF Badges of Honor

    Member since
    Sep 2012
    Location
    East Bay California
    Posts
    687
    Thanks
    301
    Thanked 1,943 Times in 529 Posts
    Quote Originally Posted by AJR View Post
    So along with heat sinks, some floppy casings, and most of the hard drive casings, I could mix the platters in my aluminum scrap bin as well? I pull the boards off the hard drives and sell them separate. I can get about $0.40/lb for the remaining drive. I have about 800 lbs of remaining drives that I wanted to pull apart for the super-duper magnets. I know usually the top cover of the drive is steel, and the rest of the casing is cast aluminum.
    Yes, the people I know who scrap hard drives, throw the platters in with their Al...

    Scott

  14. #11
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I once used HCL acid to eat out the aluminium from the platter & the remaining 'chromeplate like' metal weighed 0.9grams.

    Thast 0.36 grams Platnium per disc. Somethings wrong here............


  15. Similar threads on the Scrap Metal Forum

    1. Platinum question
      By fatboy2131 in forum Misc. Metal Recycling
      Replies: 9
      Last Post: 08-11-2019, 10:20 AM
    2. Hard Drive Value
      By rmiller943 in forum Computer Recycling
      Replies: 11
      Last Post: 11-13-2013, 08:45 PM
    3. Hard Drive Erase Software. Requirements For Selling Hard Drives
      By Jeremiah in forum General Electronics Recycling
      Replies: 37
      Last Post: 08-23-2013, 03:30 AM
    4. another hard drive breakdown question
      By ozzy214 in forum General Electronics Recycling
      Replies: 13
      Last Post: 10-18-2012, 08:00 PM
    5. Break down of a Hard Drive
      By parrothead in forum Dismantling, Breaking Down & Maximizing Scrap
      Replies: 13
      Last Post: 10-23-2011, 06:57 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook