Results 1 to 11 of 11

Microwave magnetron breakdown w/ pics

| Dismantling, Breaking Down & Maximizing Scrap
  1. #1
    Ran440 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Flint, Mi
    Posts
    51
    Thanks
    1
    Thanked 17 Times in 12 Posts

    Microwave magnetron breakdown w/ pics


    Thought it would be neat to take a few pic while a tore apart a microwave oven magnetron.
    Just stumbled upon the copper doing my first one.

    There is a brass washer on the end.
    Aluminum fins.
    Two pieces of copper under the cover on the end.


    Obviously some steel.

    And a copper surprise in the core. 80 grams worth.


    Last edited by Ran440; 12-24-2011 at 12:35 PM.

  2. The Following User Says Thank You to Ran440 for This Post:



  3. #2
    SMF Badges of Honor


    Member since
    Jul 2011
    Posts
    195
    Thanks
    10
    Thanked 106 Times in 54 Posts
    Just be careful. I believe the pink ceramic stuff on the magnetrons contain some really bad/poisonous chemicals. I don't mess with breaking them down because I read if you breath in the dust from a broken one it can do some damage.

  4. #3
    Mechanic688's Avatar
    SMF Badges of Honor



    Member since
    Mar 2011
    Location
    Warsaw , Ind. In the heart of the lakes, and down the street from the hotel where Al Capone stayed.
    Posts
    9,568
    Thanks
    11,247
    Thanked 10,730 Times in 4,728 Posts
    Isn't the bigger round armature looking thing in pic#4 actually brass, look at the scuffing.
    P & M Recycling - Specializing in E-Waste Recycling.
    If you enjoy your freedom, thank a vet.

  5. #4
    gustavus is offline Metal Recycling Entrepreneur
    gustavus's Avatar
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Canada
    Posts
    1,209
    Thanks
    1,351
    Thanked 920 Times in 425 Posts
    Quote Originally Posted by Mechanic688 View Post
    Isn't the bigger round armature looking thing in pic#4 actually brass, look at the scuffing.

    The center is copper, inside the really older microwave magnetron the segments were brazed in with gold.

    I've only ever come across one with the gold brazing and it is not to likely that I will ever find waveguides from high tech equipment in farming country.


  6. #5
    Ran440 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Flint, Mi
    Posts
    51
    Thanks
    1
    Thanked 17 Times in 12 Posts
    Quote Originally Posted by Mechanic688 View Post
    Isn't the bigger round armature looking thing in pic#4 actually brass, look at the scuffing.
    That "scuffing" is where I filed it to confirm it was copper before I continued dismantling it.
    I do a lot of checking since I have been coming across a lot of motor windings made with aluminum wire instead of copper. It really sucks to tear apart a motor only to find aluminum wire.
    Live and learn.

  7. #6
    samuel-a's Avatar
    SMF Badges of Honor


    Member since
    Dec 2010
    Posts
    69
    Thanks
    12
    Thanked 98 Times in 31 Posts
    Quote Originally Posted by bjybjy View Post
    Just be careful. I believe the pink ceramic stuff on the magnetrons contain some really bad/poisonous chemicals. I don't mess with breaking them down because I read if you breath in the dust from a broken one it can do some damage.
    That is correct.

    Beryllia (beryllium oxide) may be found in them.
    Spooky stuff indeed!
    Regards, Sam

    www.Goldnscrap.com

  8. #7
    KzScrapper's Avatar
    SMF Badges of Honor


    Member since
    Apr 2011
    Location
    Denver Metro, CO
    Posts
    4,841
    Thanks
    7,019
    Thanked 5,792 Times in 2,417 Posts
    At one time some golf clubs were made out of that stuff too.
    Recyclable Material Merchant Wholesaler
    Certified Zip-Tie Mechanic
    "Give them enough so they can do something with it, but not too much that they won't do nothing."

  9. #8
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    Whats your method for taking the end caps off the magnetron?

    It looks like you ground the weld down & then pulled the end plates off.

  10. #9
    newattitude's Avatar
    SMF Badges of Honor


    Member since
    Jun 2011
    Location
    Hinckley Ohio, home of the buzzards
    Posts
    2,163
    Thanks
    1,431
    Thanked 2,497 Times in 904 Posts
    I'm so afraid of taking these apart, I really am. I see you guys have done it but maybe you could post a picture with the tool(s) you used positioned in the pic where you cut the magnetron open to get the copper out. It IS in the inside correct? Or am i looking at it wrong and that center piece itself is the copper?

  11. The Following User Says Thank You to newattitude for This Post:


  12. #10
    Ran440 started this thread.
    SMF Badges of Honor


    Member since
    Sep 2011
    Location
    Flint, Mi
    Posts
    51
    Thanks
    1
    Thanked 17 Times in 12 Posts
    That whole center piece is copper. Pic #4 shows where I filed it just to verify before starting. I just secured it in a vise and used a chisel. I got all of the copper that way as opposed to trying to cut it off which left some on the steel ends.

  13. The Following User Says Thank You to Ran440 for This Post:


  14. #11
    eesakiwi's Avatar
    SMF Badges of Honor



    Member since
    Dec 2010
    Location
    NZ
    Posts
    2,531
    Thanks
    2,909
    Thanked 2,556 Times in 1,227 Posts
    I used a cold chisel, not the sharpest tool in the shed.
    The bobbin kept crushing in the vise.
    That took out both of the discs on each end & I needed to grind a weak point around the outer edge so i could get the chisel in & under the discs.

    Your worst one was the same as my best one.

    I will have another go at it since I have about 40 now, thats 3+Kgs. NZ$22 (US$16?)

    When I scrapped microwaves with a hammer.....
    I'd hammer the first pics part off with the hammer,
    Then I'd bash the little ceramic part (with two pins on it) into the box.
    Then I'd grab the fins with my right hand, box in my left, annnd Pull.
    That'd pull the magnetron out of the unit & stretch the wires out, the ceramic pins'd drop out & I'd wiggle my right arm till the copper wires broke at the white ceramic part, then break them off at the magnetron.

    I used two pipes to bash the Ali fins off the copper bobbin, sit the unit on top of the larger tube, the fins touching bit pointed downwards inline with the direction of the bash.
    Then sit the smaller dia tube over the end of the bobbin & bash it so the bobbin slipped down into the tube.
    2 bashes = a minute with the pliers.

  15. The Following User Says Thank You to eesakiwi for This Post:



  16. Similar threads on the Scrap Metal Forum

    1. Microwave Tear Down
      By CMHN in forum Scrap Metal Videos
      Replies: 17
      Last Post: 07-05-2013, 01:24 PM
    2. magnetron magnets
      By freonjoe in forum Scrap Metal Questions and Answers
      Replies: 12
      Last Post: 11-15-2012, 04:59 PM
    3. Pics of a Monitor CRT breakdown
      By ElectricMetal in forum TV and Monitor Recycling
      Replies: 15
      Last Post: 03-20-2012, 10:10 AM
    4. microwave motor ?
      By scraperTami in forum General Electronics Recycling
      Replies: 25
      Last Post: 08-30-2011, 09:32 PM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

 
Browse the Most Recent Threads
On SMF In THIS CATEGORY.





OR

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

The Scrap Metal Forum

    The Scrap Metal Forum is the #1 scrap metal recycling community in the world. Here we talk about the scrap metal business, making money, where we connect with other scrappers, scrap yards and more.

SMF on Facebook and Twitter

Twitter Facebook