Experienced Scrapper
anybody on here ever pull apart one? how hard are they and are they even worth pulling apart? i searched but didnt see anything on here about them, and it was about the same on google. they should be just like the little ones right? i see a bunch on a few of the auction sites i watch, 25kva and larger, and dont know if they are worth picking up.
|
Look down below your posting at the related ones, might be something there.Originally Posted by bensjunk
P & M Recycling - Specializing in E-Waste Recycling.
If you enjoy your freedom, thank a vet.
|
Look in the scrapper video section. Jackshmuck did a video on braking down a transformer.
Experienced Scrapper
thank you both. when i searched them all i came up with were computer sized ones, not sure why i couldnt see those.
Thornton Scrapper
|
Before you take the time to break it open, scratch or cut a wire to make sure that it is copper not aluminum wire in there
Metal Recycling Entrepreneur
|
Do they have Tar inside them? The big transformers I have taken apart (240-240 isolating transformers & Neon tube sign transformers) all returned a great profit.
Experienced Scrapper
not sure about the tar, and they all look fairly old, but im bidding on them at a straight steel price with no competition, so i should make out pretty good, i hope.
Metal Recycling Entrepreneur
They can be a great payday. SSince they are old thoughbe sure 5o make sure they don't contain any pcbs. They will have a tag of some sort saying they don't have any. If they don't have that tag be careful. It could cost you in disposal fees.
|
If they have a weld, split the weld, as shown on the Jack the scrapper video. I have scrapped some rather large trans, they were the E& I type. Those are a bit of a pain but I thought it was worth while and I'm not one for breaking everything down.
The E& I type are the shapes of the steel encasement around the copper winding. The shapes are interwoven staggering in a way to form a square box around the copper winding. Those are a little tricky. If I had a great way of doing it I'd share. The welded ones are much easier. When splitting them use gloves and eye protection.
Last edited by Russell; 10-20-2012 at 06:14 PM.
|
Or this could happen: http://i1209.photobucket.com/albums/...mas2011037.jpg
Happened last winter.
People may laugh at me, but that's ok. I laugh all the way to the bank.
|
I would just toss these into a barrell... of transformers,, it will add up.. It safe too... I've done a few chop and only to get things flying around... Had One Ping Me between the thigh... not a good feeling for a pound of wires.. or less..
Safe then sorry.. I would say.. Barrel it.
There are currently 1 users browsing this thread. (0 members and 1 guests)
|
Browse the Most Recent Threads
On SMF In THIS CATEGORY. 
OR 
|
Posting Permissions
Register To Reply
Bookmarks